Time Balance is set to Last for EPMA Essbase application in Essbase Outline
Hello Gurus,
Following is my scenario -
I have an EPMA Essbase applications that I have deployed from Workspace.
I have observed that even though the Time Balance property for members for the accounts dimension are set to Balance (as seen in Dimension Library) in EPMA, after I deploy the application the dimensions are tagged as TB Last in Essbase outline (as seen in EAS).
I am not aware of the functional part much, would really appreciate someone's help on this issue.
Thanks.
hyperionEPM
Here is the doc that explains time balance settings in Essbase:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/dcatimse.html
Here is the doc that explains time balance settings in Planning:
http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch12s04s08s01.html
And here's a quick cross reference between Essbase and Planning:
ESSBASE / PLANNING
TB Last = Balance
TB None = Flow
TB First = First
TB Avg = Average
In general, Income Statement accounts are "Flow", and Balance Sheet accounts are "Balance" (unless you're storing activity, and not balances). Statistical accounts are a mixed bag.
Hope this helps,
- Jake
Similar Messages
-
How to set the icon for the entire application with JFrame.setIconImage
I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
How can I set the icon for the entire application?
How can I set the icon for JDialogs?
Thank youIn order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
cheers,
Greg -
Use TC as temporary AEBSn Until Time Machine is Set Up & ready for B/U?
I want to set up TC by itself with iMac and MBPro and use the same as AEBSn until I set up Time machine on each computer. I have Leopard on both, but with extended first backup times that I have been reading about I want to have TC ready to go but set up time machine up on each computer and do the backups at convenient times when no one will be using the computers, such as overnight.
Message was edited by: Terry TempleThat's essentially what I want to do. I'm just wondering if the TC can just operate as a AEBSn until I turn Time Machine on on each computer for the first time. Normally, I would connect all of the devices I intend to connect and get TC working and then turn Time Machines on when I am ready.
-
Help required for setting up TOMCAT for a particular application?
Hello Everyone,
Can we have 2 ROOT directories in TOMCAT/webapps folder? For ex. ROOT and ROOT1.
Both the folder contains different set of jsp files but same web.xml file.
Can you suggest any other alternative.
Thank You.
With Regards,
Raghuthankyou for your prompt replies.
i am actualy attempting to build a loading frame for applying loads to a very small specimen. since the applied loads are going to be very small, i wonder whether a feedback is essential or optional for me. i do believe, however, that since i will be using a stepper motor, i might just be able to afford neglecting the inclusion of encoders for feedback.
i would be glad if you could comment on the attached diagram and kindly advise as to how i might improve on the conections i have made. the idea i have in mind is to measure the load applied by the motor using the load cell and also determine the displacement using the LVDT....thereafter, i would want to record the data using an A to D in a computer. the spring has been included in order to control the process of loading the specimen...the whole arrangement is intended to perform similar to a Universal Testing Machine, albeit in a mucu smller scale....
from your response to my last message, i am guessing that the SCB-68 is not of much use to me.....i would also be glad if you could kindly tell me the difference between the "Digital I/O" and "Motion I/O" terminals on the FW7344... currently, i have connected the UMI 7764 to the Motion I/O terminal of the FW7344 and have not figured out how i might use the Digital I/O terminal at all....kindly do enlighten regading that matter too...
once again , i'd like to thank you all very much for your time, patience, help and support....
Attachments:
loading machine connections.jpg 39 KB -
Iplanet 4.1 - How to set session timeout for a specific application
Hi everyone,
I have a Iplanet 4.1 old web instance running on Solaris 8. We are using this web instance to connect to few application instances running on Websphere 3.5. We have upgraded most of our web/app to higher version except this.
One of the websphere applications need more session timeout. (Which I fuguredout not possible to do on Websphere).
How do I achieve this on Iplanet 4.1.
NOTE: I referred to Iplanet 6.x where we can achieve this by updating web-app.xml timeOut value per URI. I do not find web-app.xml under v4.1
Thanks in advance,Sorry to say that we can't help here. WS4.1 is obsolete a long time ago.
As you mentioned that you should use WS6.1SPx or WS7.0 for your production and get support. -
Setting dynamic language for WD ABAP application iView
Hi,
I have created an iView for a WD ABAP application which runs with two languages, EN and FR.
When I run this application with app parameter sap-language=EN or FR, it works fine in corresponding language.
How do I set this in its portal iView so that it picks up browser language?
Thanks and regards,
AmeyHI Amey,
The language is determined in the order below.
1. sap-language URL parameter
2. Default language in the setting for the system logon
3. Web browser languages (Accept-Language)
4. Default language of the SAP system
Refer to
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm
Just clear the logon language parameter for the user in SU01 and it should pick the browser language.
If you change the browser language, you will have to logout and login again to the portal for the changes to take effect.
Thanks
Prashant -
Setting the item for globalization with application language derived...
Hi guys,
i would like to try translation based on item preference.
I've these settings.
Application Primary Language: italian
Application Language Derived From: item prefercence (english)
I've tested the translation with browser settings and it works.
Now i want to have a fixed language.
How can i specify this item?
For example i want a static global var containing the language called CUR_APP_LAN
Wich value i have to assign to CUR_APP_LAN and where i say to apex that it has to use CUR_APP_LAN for translation?
Thanx a lot.You have to create an item (application item) named FSP_LANGUAGE_PREFERENCE and set its value to 'it'.
Scott -
How to create a set up program for my Java application
Can some one please tell how to create a Setup for my Java Application
Thanks for your reply.
But still if you could have answered my query it would have been of a little more help for me, as I am quite new to any of these kinds of forum.
Still thanks a lot for the reply. -
According to docs, time balance are system-defined based on account type. However, I can set any time balance. And it not enfore time balance setting on app validation and deployment.
So, is any relationship between account type and time balance?Hello,
Check this forum, see if that helps..
Time Balance is set to Last for EPMA Essbase application in Essbase Outline
The last post in the above thread might be helpful.
Thanks,
hyperionEPM
Please mark answer as helpful or correct for others to find it easliy. -
Time Balance = First for account in HFM
Hi All!
Is it possible in HFM to get correct results in summary time periods for "Opening" account (like in Planning when you setup account Time Balance property as First).
For example:
I have such accounts: CFOpening (Balance type), CFFlow (Flow type), CFClosing (Balance type)
and amounts
for Jan:_
CFOpening = 100
CFFlow = 50
CFClosing = 150
for Feb:_
CFOpening = 150
CFFlow = 50
CFClosing = 200
for Mar:_
CFOpening = 200
CFFlow = 50
CFClosing = 250
for Q1_ I want see this results:
CFOpening = 100 (amount from Jan)
CFFlow = 150 (sum of Jan-Mar)
CFClosing = 250 (CFOpening + CFFlow)
but now I have:
CFOpening = 200 (amount from Mar)
CFFlow = 150 (sum of Jan-Mar)
CFClosing = 350 (CFOpening + CFFlow)
How can I get correct result for Q1 in such case?
Thanks a lot in advance!In HFM balance accounts behave as ending balances, so that the YTD value is always equal to Periodic value. Your CFOpening account is declared as balance, accordingly HFM understands that March value (200) behaves like ending balance of this account. Therefore Q1 ending balance of the account is 200, it cannot be 100 unless you redefine your rules to set your CFOpening account always to the year beginning value (or previous year's ending balance). That is for all months CFOpening will be 100 for all months. But then you would have a problem of adding up balance and flow accounts. Because flow accounts unlike balance accts have different YTD and Periodic values. Usually, we overcome this problem by declaring all accounts as balance, at the expense of losing the Periodic values of the CFFlow account.
-
Dears,
the HPL Admin Manual states:
"Variance reporting and time balance settings are system-defined; only Saved Assumption is userdefined."
Is this meaning I cannot change time balance of my accounts?!?
TxIt means if Account type is Revenue or Expense time balance will be flow and for Asset, Liability and Equity it will be balance By Default! (and its serving the purpose)but you can change it as per your choice.
Cheers..!!
Rahul S. -
Metrics "Database Time Spent Waiting (%) is ar 100 for event class "Applica
Metrics "Database Time Spent Waiting (%) is ar 100 for event class "Application".
i get this error in database. help me regarding this error.Streams AQ: qmn coordinator idle wait 31 16 42598 1374.12 425976281 989870553 2723168908 6 Idle
Streams AQ: qmn slave idle wait 15 0 41599 2773.27 415990747 1830121438 2723168908 6 Idle
Streams AQ: waiting for messages in the queue 83 83 41478 499.73 414776290 3955192389 2723168908 6 Idle
jobq slave wait 134 131 39906 297.8 399055017 782339817 2723168908 6 Idle
Streams AQ: waiting for time management or cleanup tasks 7 4 3778 539.71 37779540 3702640206 2723168908 6 Idle
class slave wait 3 3 1499 499.54 14986144 1055154682 2723168908 6 Idle
Streams AQ: qmn coordinator waiting for slave to start 2 1 500 249.95 4999066 1565566389 1893977003 0 Other
LGWR wait for redo copy 1 0 0 0 1 4266849434 1893977003 0 Other -
Hi guys,
I am new to indesign scripting using applescript.
my code is shown in below, my problem is can't set xml element for table
tell application "Adobe InDesign CS6"
tell active document
set rootele to associated XML element of story 1
if rootele = nothing then
set rootele to XML element 1
end if
tell story 1
select text 1
set markup tag of selection to "table" -----------------> this is my problem please help me.
end tell
end tell
end tell
this code is right or not. please help me.The metadata about the table mappings are also stored in the compiled XML Schema document. If you lookup the schema document located at /sys/schemas/.... , you will see that the element with SQLInline=false will have a xdb:defaultTable attribute which provides the name of the table used to store the element.
- Ravi -
Why set up table not used in applications like FI, HR etc
Hi,
We all know that we use set up tables for LO Cockpit applications.
But we dont have for non LO applications like HR , FI...why such a difference is made by SAP...
One of the fellow suggested that for FI, HR etc, there is huge posting of data and so we dont want to store such a duplicate data
is this the case?
or there is some other reason...
please suggest the same
Thanking You,
Tarun Brijwani.Hi,
this question has already been asked a few times. Please search the forums for the answer.
regards
Siggi -
Last time, I've set password for if my iPod is lost, and now I forgot it
Hi. Last time, I've set password for "Find my iPhone" if my iPod is lost and now I forgot the password for it. Is there any ways that you can help me to unlock it by today?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Time machine stuck on 'calculating changes'
I have been using Time Machine backups to a 2TB Time Capsule for over a year, and one of my 4 computers has recently stopped backing up. The other 3 are still backing up fine, and I ran disk utility on the Time Capsule which stated that it was workin
-
Adobe reader XI and X wont start up and display thinking icon
Hi I'm running Widows 7 home premium on a 64 bit system with Kapersky's antivirus. I've tried a bunch of different things to get the Adobe reader to work to no avail. Adobe reader XI opens and then immediately freezes and displays the thinking symb
-
IBook G4 Kernel Panic (Solution?)
today i tried to fix my iBook G4 (mid 2005). the problem i was having was i would get kernel panics very shortly after boot, i don't know why but i was. for a while it sat on my shelf and i may have fixed it. i replaced the optical drive with one fr
-
Require coding for purchase requisation outstanding aging report
Hi Gurus, I got a requirment to develop purchase requisation outstanding aging report.Please provide me the coding for purchase requisation outstanding aging report. Points will be rewarded for every reply. Regards , Sonali.
-
Footer rising up on page w/.dwt file
Hello all, I've been having a problem with the footer location when using the templates. I have been working on a site, built a model page which seemed to work well, and then saved it as a template. Header, footer, left sidebar, main content area. On