Time-based turning off of bluetooth keyboard

I'm using an Apple bluetooth keyboard with my iMac. If I forget to manually turn off the keyboard, the batteries in it drain 20% overnight. Is there no setting that says: Turn off the keyboard if there's no activity for 5 minutes? I notice that Windows 7 allows me to do this, even for my Apple keyboard (since I'm running W7 on my mac). Thanks.

No, there's no announcement when it sleeps, only when it connects/disconnects.
Here is Apple's description:
The Apple Wireless Keyboard requires just two AA batteries — one less than the previous model. And its intelligent power management system conserves battery life. So when you’re not using the keyboard, it automatically powers down. The instant you start typing, it turns back on. Use the on/off switch when you're away from your computer for a long time.
Regards
Captfred

Similar Messages

  • I forgot to turn off my bluetooth keyboard.

    Yesterday I forgot to turn off the keyboard and now my iPad mini won't work.  Thinking it had just drained the battery I plugged it in overnight. It reacted to being plugged in with the usual sound but nothing happens when the buttons are pushed.  Have I damaged it beyond repair?

    Leaving the keyboard on won't cause damage. Just try turning it off and on again. If that doesn't help:
    Once it is fully re-charged, consult the manual for how to reset the keyboard and re-pair it to the iPad.

  • HT4111 How do I turn off my bluetooth keyboard

    My keyboard keeps getting turned on while in transit in my bag, is there a way to turn it off so that it doesnt keep getting turned on accidently.  Is there anyway to turn it off other than by hitting the on/off button on the right side.

    The most solid way to keep it off when in your bag is to remove the batteries and keep them somewhere with your keyboard when not in use. It shouldn't usually turn on unless the power button is pressed though.

  • Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing

    Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing!! and i want to know why is happen

    Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
    Regards.

  • Why is it that every time I turn off my wifi on my phone my 3G dosen't work? Help :(

    So every time I turn off my wifi  from my iPhone 5c  at home My 3 G Doesn't Want To Work? And a 1x keeps popping out?

    Could be cause I just got my phone like 2 days ago. Lol and sometimes it has a mind of its own. Like when I'm trying to text it starts to push random letters and it will go home and then go in to my contacts and then a app with out me pressing anything. Like if it was a glitch or something?

  • How do I stop Firefox reverting to standard settings every time I turn off my PC?

    I set up my preferred icons history, print, home etc in the places I like them yet every time I turn off my PC the next day they are back to the standard set up & I have to do them all again, more than a little bit irritating as it has never been a problem before & only started happening when I upgraded to 33.1
    Things like this seem to happen every time there is an upgrade, it is getting to the point where after years of using Firefox I am seriously considering looking around for a new default browser.
    As if to illustrate my point when I just restarted Firefox after installing the troubleshooter add-on all my custom icon settings are gone AGAIN.

    Your preferences not saved.
    Create a new profile as a test to check if your current profile is causing the problems. <br>
    See '''Creating a profile''':
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
    '''Profile Backup and Restore'''
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How to turn OFF thé french keyboard

    How can I turn OFF thé french keyboard on m'y iPAD?

    Settings > General > Keyboard > Keyboards > swipe from left to right the French keyboard to delete.

  • Why do I have to reconnect to my Network manually every time I turn off my laptop? But yet it stores my password.

    Why do I have to reconnect to my network every time I turn off my laptop? But yet it stores my password. It has been happening ever since I upgraded to OS X Lion. I have two default wireless routers I connect to (my home and work) and yet everytime I turn on my computer I have to manually select which network I want to join from the drop down menu at the top of my desktop. Any suggestions? I dont want to have to manually choose, it should just look for those two networks automatically and connnect to whichever one is available.

    It was already set to Automatic......and still it doesnt connect to my network.

  • Time Capsule Turns OFF on reboot and wake up

    I'm using the latest versions of everything on this iMac and AirTime Capsule. For the past few weeks I noticed that when the desktop wakes up Time Machine is OFF in System Preferences or when I reboot the Mac, Time Machine turns OFF also.
    Reading other posts, I started to look for a com.apple.TimeMachine preference in the Library but I could not find any reference to that file.
    It's annoying because I expect my stuff to be backed up during the day while working. At night, before the Mac goes to sleep, SuperDuper does a full backup on a different drive.
    If you could help resolve this issue, I would appreciate. TIA.

    Thanks for your reply. That's what I've been doing to delete in Library the TimeMachine plist file. I even lock after the first reboot the SysPrefs panel of the Time Machine to ON. Then on second reboot, Time Machine reverts automatically to OFF. Same thing the next day waking up after sleep. The Mac wakes up and Time Machine is OFF again.
    I am puzzled and confused as to why it does this. Time Machine has worked superbly since last July, then around the end of December it started doing this trick. I update religiously my Macs whenever Apple Software Update tells me to, so I'm running now on this iMac 10.6.6 and on the AirTimeCapsule 7.5.2.
    Dazed and confused

  • My MacBook Air keeps randomly turning off but they keyboard is still lit.

    I'll be doing work on my MacBook Air that I only got a month or so ago.  and the screen with suddenly turn black. The laptop isn't off as the keyboard is still lit. It is fully charged and plugged in. I have pressed all the buttons but it still won't turn on. I have to press and hold the On/off Button to restart the whole computer.  This makes me lose my work. Any ideas?

    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    I hope I answered your question.
    Austin

  • How do you turn off a wireless keyboard?

    After the G5 iMac died, I bought a refurbished Intel 21.5" iMac from Apple. The wireless keyboard that comes with is fine but I prefer my wired USB keyboard with numeric keypad, etc.
    So I want to put the wireless one away. Every time I push the power button, the green light comes on for a few seconds and the keyboard is still operational. I finally took the batteries out but that is a silly way to shut a device off.

    Took some trying.
    Press ne time on is on, it will first go in pairing mode if not set up, or simply connect.
    To turn off, press the button and the led will go on. Keep pressed until the led goes of and the keyboard is now turned off.
    To pair with another device, turn on and keep the on button pressed until the led flashes green. Now you can pair it with another device, like your iphone on the go.

  • This is a hint to anyone who cannot find their airprint printer from their ipad:  after 10 hours of trying everything imaginable, i can now print directly from my iPad by turning off the bluetooth in settings and waiting for 30 seconds.  presto!

    after spending a full day and a half trying everything imaginable, i finally found a way to get my ipad to find my new airprint capable  printer.  I could print from email or the cloud, but not directly from my ipad.  After reading a discussion about bluetooth printers, i turned off bluetooth in settings, waited 30 seconds, and voila!!  I was able to print directly from my ipad.  Try it if you are having troubles

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Time Machine turned off... and my Mac keeps asking for the TM volume!!

    I turned off Time Machine because I am away from home and not using the external HD, but I keep receiving an annoying message: "Time Machine could not complete the backup... bla bla bla volume not found".
    The funny thing is that I have even clicked "NONE" in the volume window before setting Time Machine off... and still TM doesn't stop working.
    The message appears almost once an hour...and I can't watch a movie or do a presentation without having to click return on the keyboard to get rid of the error window.
    Any suggestions?
    Don't tell me to switch TM off... it's off!!!!!!

    ascanio wrote:
    Never used any of these apps... and I am not very fond of reinstalling the OS, since I keep it in really good shape already (Mac user for over 22 years).
    Pondini wrote:
    The easiest way is to select a disk temporarily, then turn TM Off.
    Just don't use one if the message says TM will reformat, as it will do that immediately.
    have you given that a shot ?
    As of your experience, do you know any other setting file related to TM other than this plist in the root Library? I will look in the user lib as well...
    sorry, no. i use my TC for TM backups so i never had a reason to turn TM off permanently.
    good luck !
    JGG

  • I lose my Wi-Fi network settings every time I turn off

    Hello, and thank you for your time. Just bought my iPod Touch yesterday, and am loving it.
    One problem I'm having, though. I can't keep the settings for the network I want to use.
    I configured my router's network on it. Put in WEP and the security key. I was connected to Wi-Fi just fine, no problems.
    Then I turned the iPod off. When I turned it back on, even though the iPod is configured with the router (which is on private network, so my "lovely" neighbors don't leech off it), my network disappears. My PlayStation 3 that I'm not using for a network appears every time I turn on and off. But, every time I turn the iPod on, I have to put in the information for the network I want to use (name, security, password) all over again.
    Any help is greatly appreciated. Sorry if there's an answer here already and I missed it. Thank you.
    Walter

    You need to select to "remember" the access point so it automatically reconnects unless by "private network" you mean that you're not broadcasting the SSID. If that's the case, it won't reconnect automatically-it's a feature, not a bug. My advice, broadcast the SSID and set a strong password. Hiding it doesn't do much for you from a security standpoint. Setting a 40 digit random password does.
    If this doesn't work, do a Restore.

  • How can I turn off mousepad below keyboard?

    How can I turn off the mousepad below the keyboard?
    This question was solved.
    View Solution.

    Double tap the upper right corner of the touchpad to turen on or off.
    Your user manual page 24

Maybe you are looking for

  • Need to delete iCloud Account

    Hey there. I recently decided I want a professional iCloud-eMail Address, i.e. [email protected] and created a new iCloud-Account for it. However, I recently found out about aliases and would now like to delete the pro adress and just add it as an al

  • HP SERVER SCSI U320 PCI-E ADAPTER [412911-B21] windows 7 x64 driver?

    Hi, the card 412911-B21, can be installed on windows 7 x64? I only found these drivers: http://goo.gl/woBrl Thank you

  • Question about compiling with different jdk's

    Hi, I have a questions which I can't find an answer for. If I compile my program with jdk 1.6, will some1 be able to run it using jre 1.5 ? a) Assuming I don't use any 1.6 new features b) Assuming I use 1.6 new features. Btw. I would check myself on

  • Editable ALV Grid: Append new rows

    Hi All, I have developed a report which will displays output in editable ALV grid list. Users can modify the values in output and save. These values will be stored in one custom table. My requirement is whenever user clicks on '+' mark (Create entrie

  • Images at a distance appear blurry - Vado HD

    I am getting some fairly sharp images up close but at a distance even with ample outside lighting my images are very blurred. I have a brand new vado HD mini cam.I am not expecting perfection but the images I am getting are less than satisfactory. Up