Time between submission and publication?, Time between submission and publication?

The forum seems to suggest that it takes about 7 days for Apple to vet and put up a book in the iBookstore. I noticed mine (submitted Feb. 7, I believe) is "expected Feb 28," or 21 days. Is that just the outside estimate? What is the experience of others who have published here?
Thanks.

Where did you guys get your estimated publishing date..... does Apple contact you?
I may have published a couple of drafts, as the error codes during publishing kinda threw me off....

Similar Messages

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • Sharing one iTunes account between 3 devices and a Time Machine

    I have a iphone 4S
    i have an Imac
    I have a Time machine
    I have a macbook
    I have Apple TV - hard wired to the TV
    All devices are using the latest versions of OSX and IOS
    My Iphone syncs with the imac Itunes account
    All my Music is on the Time Machine which is connected to my router (virgin Broadband)
    The itunes account on the Imac is aware my music folder is on the time machine.
    My question is - how do i get to use my Itunes account on the Macbook and update playlists and Playcounts on the Iphone and Imac?
    I want to be able to play my music on the time machine from any of my apple devices and it update one music Library.
    Is there a way i can do this?
    Regards and thanks for your time

    You can sync your music to each of your devices using the iMac which is referencing the library on your itunes. So all good there. If you want to share the information amongst all your devices then home Sharing will do it. But only if you are in your own network.
    If you want to use the same klibrary on your Macbook as your iMac you can point it at the Library on the time capsule.
    If you want the content on your Macbook then Home Sharing between computers will let you copy it but it will not copy over playlists etc
    Using home sharing you have to have itunes open on your iMac so that the other devices can see it. Also ensure that sleep is not set for your computer.
    Understanding Home Sharing
    Setting up Home Sharing on your Computer
    Setting up Home Sharing on your device
    Setting up HomeSharing on Apple TV

  • Reading log file and calculating time between

    If someone could help me with this one, I would be very grateful.
    I have a log file and I need to search a string that contains a start time and end time (eg. <time="11:10:58.000+000">). When I have these two values, I need to measure the time that has been elapsed between these two (from start to end).

    $Path="C:\Times.log"
    remove-item $Path
    Add-Content $Path '<time="11:10:58.000+000">'
    Add-Content $Path '<time="12:10:58.000+000">'
    Add-Content $Path '<time="13:10:58.000+000">'
    Add-Content $Path '<time="15:13:38.000+000">'
    Add-Content $Path '<time="16:10:58.000+000">'
    Add-Content $Path '<time="17:08:28.000+000">'
    $File=Get-Content $Path
    $StartTime=$Null
    $EndTime=$Null
    $ElapsedTime = $Null
    ForEach ($Line in $File)
    If ($Line.Contains("time="))
    $Position = $Line.IndexOf("time=")
    $TimeStr =$Line.SubString($Position+6,8)
    IF ($StartTime -EQ $Null)
    $StartTime = $TimeStr -As [System.TimeSpan]
    Else
    $EndTime = $TimeStr -As [System.TimeSpan]
    $ElapsedTime = $EndTime.Subtract($StartTime)
    "StartTime=$StartTime EndTime=$EndTime ElapsedTime=$ElapsedTime"
    $StartTime = $Null
    Gives this output
    StartTime=11:10:58 EndTime=12:10:58 ElapsedTime=01:00:00
    StartTime=13:10:58 EndTime=15:13:38 ElapsedTime=02:02:40
    StartTime=16:10:58 EndTime=17:08:28 ElapsedTime=00:57:30

  • I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

    I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.  Help!  I can't access my iTunes content.

    I have not been able to use iTunes for several months.  Every time I open iTunes, it freezes by computer such that there is about a minutes between each action.  I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.  Help!  I can't access my iTunes content.

  • VISA Write differs between TS Development System and LV Run-Time Engine

    Hi all
    I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
    Everything works fine using just LabVIEW.
    Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
    Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
    The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
    The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
    Any solutions for this?
    Thanks in advance
    Joao
    Solved!
    Go to Solution.

    Joao,
    you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
    So i am pondering: Does this refer to TS at all?
    Please check the following:
    Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
    If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
    Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
    What about loading/unloading options of the modules?
    How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
    Could you provide a simple example sequence+modules showing this behavior?
    What versions of LV and TS are you using?
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to measure time difference between zero crossing of a sine wave and rise time of a pulse on a same graph?

    I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
    Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
    The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
    I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
    I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
    Cheers
    Awais 
    Message Edited by awais.h on 03-30-2010 11:20 PM
    Message Edited by awais.h on 03-30-2010 11:21 PM
    Solved!
    Go to Solution.

    Hi
    Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
    But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
    Here is what I get using that code.
    As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
    I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
    Here is the the code modified.
    As you can see, it wasn't that big of a modification and it still is your code.
    I will keep trying.
    Thanks for the help
    Attachments:
    FinalShockSpeed.vi ‏55 KB

  • Firefox crashes every time I open it and try to go between pages, I can not use firefox, help

    I converted my new computer from an old one about a week ago.
    Every time I open Firefox, it either crashes immediately or once I try to go between pages it crashes. I get a window that says Firefox quite Unexpectedly. Apple Care worked on this with me.
    We opened Firefox in Test Mode, the crashes did not happen.
    I would like to use Firefox, it is much better than Safari, but not being able to get help for Firefox; I have no choice.
    I don't know how to submit information to Mozilla, therefore I have no crash ID.

    With Test mode, do you mean starting Firefox in [[Safe mode]] ?
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • HT3728 My Time Capsule won't allow me to access my home network each day (intermittently) between about 1000-1800. My modem is working properly, and I can get on-line by hooking my computer straight to my modem, so I know it's the Time Capsule at fault. I

    My Time Capsule won't allow me to access my home wireless network for several hours each day -- usually between 1000-1830 or so. My modem is working correctly and I can still get on-line by going straight from my computer (MacBook Pro) to the Ethernet port. It must be the Time Capsule -- any ideas?

    Any ideas?
    Wireless Interference
    Might be caused by a cordless phone in the vicinity. To give you an example, my neighbor.....across the street...used to be able to literally crash my wireless network if he was in his front yard talking on his cordless phone.
    I discovered this by accident one day after spending weeks trying figure out why my network would crash at random times.
    Other possibilities include a wireless security/camera system near you
    Still other things might be an amateur ham radio operator....which should not interfere....but again from experience, I know that this can occur.
    Yet another possibility is another wireless network near you that is being turned on and off at random times. Some users power up their modem/router only when they want to do so and leave it off otherwise.
    Some general rules to help avoid interference:
    Move any cordless phones that you might have as far away as possible from the Time Capsule and/or your computer(s)
    Avoid placing other electronic devices....computer, television, amplifier, satellite receiver, etc. near the Time Capsule and/or your computer(s)
    Avoid metal surfaces near the Time Capsule and/or your computers
    Elevate the Time Capsule as much as possible. Think of it as a water sprinkler....you want to get the room as wet as possible
    Experiment with different wireless channels on the Time Capsule. To do this:
    Open AirPort Utility
    Click on the Time Capsule
    Click Edit
    Click the Wireless tab
    Click Wireless Options
    Start with Channel 11 on the 2.4 GHz band and work your way down
    It is unlikely that you are picking up interference on the 5 GHz band since there are.....for now at least.....far fewer networks using this frequency.

  • How do i plot with the operating system time in one plot and show lines between cursors in another using the same XY graph?

    I am having some trouble graphing two plots at once. One plot is to show the current temperature inside a chamber as a function of time. I am trying to pick the current time and temperature each second and plot it with each point being connected by a line. I am able to show a moving, blinking dot each second but I can't figure out how to develop an actual line with these dots. To make matters worse, the blinking dot is back in the year 1903. I understand that it uses seconds elapsed since 1903, and am trying to find out how to graph the current temperature with the system time.
    The second plot is just 5 moveable cursors that are to be connected by a line. I am able to move the cursors and retrieve the position information, but I can't make a line between them.
    I have attached my main .vi, though you may have to pick the graphing part off to have it work for you.
    Attachments:
    Main Module Chamber Testing I_O every 30 sec.vi ‏288 KB

    You're not creating the XY graph data correctly. I've attached an example with a couple of simple XY Graphs. One is using a couple of shift registers to hold the spearate x and y arrays. I think this is what you were trying to do. The other one uses a VI from the shipping examples called XY Chart. It makes an XY Grpah act like a chart. I've also shown the correct way to display current time.Message Edited by Dennis Knutson on 05-12-2005 03:51 PM
    Attachments:
    XY Graph.vi ‏41 KB

  • How can I do to sinc my iPad 2 and iPhone 4s with Time Capsule? i need to transfered informatioon between bouth ip and time capsule.

    I have got and iPad 2 and iPhone 4s and I need to do a back up of docs, music and photos between Ipad and iphone an Time Capsule.

    You backup iOS devices to iTunes.. the iTunes then keeps the files and they are backed up via TM.
    To copy the files, you need to download a file app.. just look up file app, and that will allow you to copy files to and from the TC.. you cannot sync to the TC. There is no TM type app for iOS.. and in fact the file apps do not use AFP at all.

  • Sharing a Time Capsule between Time Machine and Data Storage

    I currently have a MBP with a 120 GB hard drive that is busting at the seams. I have a 500 GB time capsule which I use Time Machine on. I am going to move iphoto and itunes libraries onto an external drive and I was wondering whether I can share the Time Capsule between TM backup and being an external drive. It currently has more than 325 GB available. Appreciate any advice.

    alastairandnicole wrote:
    Sorry, I'm not that Mac literate. My plan was to connect the WD Book external hard drive by USB to the Time Capsule so that it will wirelessly mount. Will TM back that up automatically?
    No TM will not back up network drives. as I said it has to be directly attached. if you attach the drive to the computer instead of the TC, TM will back it up.

  • HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

    I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
    I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
    I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
    Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
    I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
    I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
    Thank you all in advance

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • Can I set my macbook to install updates at a specific time? My internet is limited through the day but between 2am and 7am it is unlimited?

    My internet is limited through the day and I want to know if I can set a specific time for updates to be carried out to make sure my macbook is working efficiently.

    Yes. When you get a notification that an update is available, select "Try Tonight". That will constrain the update to occur between 2:00 and 5:00 AM.

Maybe you are looking for