Time Capsul/MacBookPro.sparsebundle" could not be accessed (error -1).

Good Day!
So, I have this problem: Time Capsule says MacBookPro.sparsebundle cannot be accessed (error -01). I have no idea why not, because I am able to access it. See, here are the contents:
Has anyone here dealt successfully with this error? If worse comes to worst, I have not qualms about resetting my Time Capsule.
Thanks in advance for any information you can give me.
~~Kate

See Time Machine - Troubleshooting C17. . . . sparse bundle could not be accessed (error -1)

Similar Messages

Error Message is The backup disk image "/Volumes/Time Capsule/Dave Kuhl's iMac.sparsebundle" could not be accessed (error -1).

I got the error message that my Time Capsule "iMac.sparsebundle could not be accessed (error - 1). It backed up fine yesterday. Anyone else have this problem?

If it helps I am getting the same message, I have reported it to Apple and they have someone working on it. Mine stopped backing up after having a new hard drive installed. I can however back up to the same time capsule from my laptop.

I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?

I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

I keep getting the message "The backup disk image "/Volumes/Donald Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html

HT3275 Backup error w/ Time Capsule -- .sparsebundle could not be accessed (error -1)

I have been using Time Machine on a Time Capsule to back up my 2 MacBook Pros. Recently, the one running Lion started giving me this error: The backup disk image “/Volumes/Data/<computername>.sparsebundle” could not be accessed (error -1).

Suggest that you see # C17 in Pondini's excellent support document.....Time Machine -- Troubleshooting.....for all the steps.
http://pondini.org/TM/Troubleshooting.html

Time Capsule Help: The backup disk image "XYZ.sparsebundle" could not be accessed (error -1).

My time capsule hasn't been working for months now. Finally got around to looking into the problem. Have tried looking on forums -- most solutions point to Pondini.org. I've tried #17, which is related to my specific error with no avail (including using Airport Utility 5.6 to disconnect all users).
I have also tried moving (instead of deleting) my old sparsebundle into a temporary folder on the Time Capsule to "hide it" to attempt to create a new sparsebundle: while I have managed to get Time Machine to create a new one (albeit after many, many attempts), once it creates a new one, it doesn't seem to say that anything has been backed-up AND it cannot seem to access the "new" sparsebundle, giving me the error: "The backup disk image “XYZ.sparsebundle” could not be accessed (error -1)."
Thoughts?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

HT3275 The backup disk image "/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle" could not be accessed (error -1).

I am unable to complete a backup and I get this message The backup disk image “/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle” could not be accessed (error -1). I have tried to find help but I can't find it in the apple site. I'm not very techy at troubleshooting and don;t want to dlo anything that will worsen the problem without advice. Thank you.

Reboot the Time Capsule.. Lion has terrible networking issues with the TC and has simply forgotten where it is.
Check C17 for some other issues.. there is some other things that cause it. And you can do a disconnect all users if you have the right utility.
http://pondini.org/TM/Troubleshooting.html

Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks

Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr...

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

What does this mean and how do I fix it?The backup disk image "/Volumes/renee's Time Capsu/Renee's iMac.sparsebundle" could not be accessed (error -1).

Can anyone tell me how to fix this error message that comes up...
the backup disk image "/volumes/renee'stime capsu/renee's imac.sparsebundle" could not be accessed (error -1).
Thank you in advance

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

HELP! time machine error - sparsebundle could not be accessed (error -1)

my time machine cannot do backups anymore. Keep getting the same error message:
sparsebundle could not be accessed (error -1)
anyone out there know how to fix?

Standard message and second most common error here.
Look at the "More Like This" on the right.
Simply power cycle the TC will usually fix it.
See C17 for more info.
http://pondini.org/TM/Troubleshooting.html
C12 is the most common problem.. btw.. and is fixed also with a power cycle.
Power Cycle means.
Make sure the disk is not spinning. You hand can feel the vibration of the disk.
Pull out the power cord.. (since there is no power switch).. count to 10 to allow capacitors to drain.. Plug in the power cord.

Time Machine Backup error - The backup disk image "/Volumes/Data/Extreme.sparsebundle" could not be accessed (error -1).

I am getting a Time Machine backup error "The backup disk image “/Volumes/Data/Extreme.sparsebundle” could not be accessed (error -1)."
Then a Finder window pops up with the backup directory in it. When I open it I see all the backups that were completed successfully and then the one there is simply always shows the data and .inProgress. I thought that maybe if I could delete the one that is perpetually in progress it would start a new one and run fine, but I won't let me delete it.

Reboot the TC.. or go to the 5.6 utility.. and disconnect all users.. to force it to reconnect.
C17 in troubleshooting.. to give more specifics to Kappy's comment.
http://pondini.org/TM/Troubleshooting.html

HT3275 time machine error says: The backup disk image "/Volumes/Data/Apple 's iMac G5.sparsebundle" could not be accessed (error -1).

While backing up to Time Machine, I receive this message: time machine error says: The backup disk image “/Volumes/Data/Apple ’s iMac G5.sparsebundle” could not be accessed (error -1).

Welcome to Apple Support Communities
That message is caused by several reasons. Read the Pondini's site to fix the problem > http://pondini.org/TM/C17.html

Time Machine, sparsebundle could not be accessed (error -1)

Hi there,
I keep getting the following message:
Time Machine could not complete the backup.
The backup disk image "/Volumes/ Time Cap Backup/iMac.sparsebundle" could not be accessed (error -1)
Could anyone...PLEASE....tell me how to fix this. And what's the difference between error 119 and error -1
Thanks a million
Best regards,
Tonny (from The Netherlands)

Hi
I had the same problem.
Then, because the problem happened each time I restarted my Imac, I tried to check the apps starting at login.
I went to system preferences - users - login items and I looked at some "apps starting automatically at login",
In my case I deleted "WD Macintosh + Turbo drivers" (an old version incompatible with 10.7.2) and I resolved the problem.
I hope I've been helpuf

Time Capsul/MacBookPro.sparsebundle" could not be accessed (error -1).

Similar Messages

Maybe you are looking for