Time capsul on cabel net and wifi net

Can I connect Time capsul on the cabel net and wifi net at the same time. I have 2 PCs connected in cable net and macbook is conected via wifi. I have some problems with this, pls help.
Thanks

Not quite sure what you're asking -- what wifi is the macbook connected to?
You can set the time capsule up to connect to the cable network and create a wifi network in your house/apartment that will let your macbook connect to the cable network.
Or, if by "wifi" you mean a public wifi network, you can set up the time capsule to be a repeater for that within the house/apartment, although that's probably not the best way to go.
You cannot connect the time capsule to both simultaneously, however--it needs to have one source of connection to the internet.

Similar Messages

  • How to use time capsule as hard drive and connect with existing net gear router

    I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
    Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
    I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
    How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
    And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
    Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
    When i'm connected to TC, i can't access internet, only TC.
    And I don't really want to connect TC to my router via ethernet cable, as too many cables.
    This can't be a difficult situation to manage, but i'm not sure how to do it.
    Thanks

    And I don't really want to connect TC to my router via ethernet cable, as too many cables.
    Sorry but you have very little choice.
    The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
    Nevertheless if you want to give it a try .. here is the method.
    How do I setup my time capsule with wireless internet?
    You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
    (if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
    TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
    See Pondini instructions here.
    Q http://pondini.org/TM/Time_Capsule.html

  • HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    You probably can, but this type of configuration is not recommended or supported by Apple.
    Two cautions if you want to try this:
    1)  The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
    2)  Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule.  Two "hops"......even if the computer is located close to the Time Capsule.
    If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem.  If I wanted to use a wireless cellular connection to the internet, how would I do that?

    The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem.  If I wanted to use a wireless cellular connection to the internet, how would I do that?

    If I wanted to use a wireless cellular connection to the internet, how would I do that?
    The wireless cellular device would need to have an Ethernet port, to provide an Ethernet signal to the Time Capsule's WAN port.

  • Have the following iMac at home and am contemplating adding a MacBook Air and a 2TB Airport Time Capsule for backup/storage and increased WiFi speeds.  My question is this (1) a compatible setup, and (2) will my older iMac slow down the WiFi speeds?   Man

    Have an older iMac and am contemplating adding a new MacBook Air and a 2TB Airport Time Capsule to increase WiFi speeds. My question is (a) is this a compatable setup and (b) will the older iMac slow the WiFi speeds?
    Thanks

    Be careful about mixing Time Machine backups and other data on the TC's disk.  That will cause conflicts, sooner or later.  See #Q3 in Using Time Machine with a Time Capsule for an explanation and some possible workarounds.

  • Is it possible to set up Time Capsule on one network and then access its stored data (movies) using Back to My Mac from another network that also has Apple TV to play them?

    I recently purchased a Time Capsule to store data at my office.  I have an Apple TV at my home that I would like to start using to play my movies.  With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV.  Does this sound possible?  We have an iMac at the office that remains on 24/7 connected to the TC.

    ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
    You cannot play movies from ATV without itunes, which streams to the ATV.
    If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
    The next issues is speed of slowest connection.
    Your download to your home maybe great.. what is the upload speed from your office like??
    If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net..  and third to download it again.. net to home..  Sorry but it is better to play the movie directly from online itunes store.
    If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
    Overall this sounds like you need to think it out a bit more.

  • How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

    I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
    I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
    How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

    James Elliott1 wrote:
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
    That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
    There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
    Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

  • Using Time Capsule for backup only (no Wifi)

    I posted a problem in another thread ( https://discussions.apple.com/message/22500623#22500623 ) about conflicts with my Time Capsule and Comcast modem. Apple concluded that there was a hardware problem with the Time Capsule. I got a new Time Capsule yesterday since I couldn't get a refund on the old one. Because configuring the Time Capsule to work as a Wifi station requires such a hassle and I don't get any extra benefits in terms of speed compared to my Comcast modem, I now have a very expensive hard drive for backup. I have some questions about using the TC for backup only since I am running into some problems with the backup.
    1. Does the TC have to be connected to my modem? It seems that when I do not connect the TC to the modem then I end up with the backup stalling after a few GB. Additionally, I end up with the flashing amber light.
    2. If I do connect the TC to the modem it backs up but my WIFI grinds to a halt (likely a product of all the data pushing from the computer through the modem and to the TC). I should add that in Airport Utility I have turned off WIFI on the TC so it should not be interfering with the WIFI. If I do need to connect to the modem are there any tips for not messing up WIFI speeds beyond just backing up when everyone is asleep? I assume not, but it can't hurt to ask.
    Thanks.

    2. My initial setup showe various errors so I hooked the TC into the modem via the WAN port and then I was able to set up (WIFI off, Bridge Mode OFF) and those errors went away.
    If I understand your last post correctly, you say that I should do a reset on the TC. Re-configure but leave the errors because backups will still work. Then I can leave the TC unplugged until I need to use it (which has the added bonus of limited flashing amber light). Is this correct?
    You are setting up the TC in the wrong mode.. it has to be in Router mode.. Not Bridge..
    You are worrying too much about the flashing amber.. it is irrelevant. You can select ignore and it will go green.
    This setup is actually simple.
    So here is what I suggest.
    1. Factory reset the TC.
    Just to get started from a clean setup. And that will put the TC in the correct mode.. ie dhcp and nat.
    2. Plug it by ethernet LAN TC to computer. On the computer no other connection.. turn off wireless.
    3. Just change the name of the TC to something short as it helps.. eg TCGen5
    And turn the wireless off.
    And ignore all the other problems.
    4. Now setup TM.. I would also start clean.. do a fresh TM setup .. see A4 here.
    http://pondini.org/TM/Troubleshooting.html
    5. Run the backup. Maybe even erase the TC before you start so you are really doing a fresh clean backup.
    The very first backup will start quickly and drop to very slow speed as there are heaps of very small files in the system.. these take a long time to process.. but as it proceeds it will speed up. Overall you should still average 50GB/hr.
    6. Once you complete the first backup, later ones should be fine.. but do not expect them to work as well as when you do it hourly.. it does need to do a lot more work to figure out where the TM backup is up to.
    I would like to get you to have another crack at using the TC properly in the network. When you are over the pain of all this.. and perhaps when apple releases a decent firmware update you can go back to it.. but I have another suggestion for setup. Get the above working first so you have a good first backup of all your computers.

  • I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

    I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?  Also, how do I add co-workers to my work time capsule and wife to my home time capsule?  Thank you!

    You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
    You might be better using a real backup software.. superduper, CCC, chronosync etc.
    The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

  • Update time capsule, since ipod not connect wifi to time capsule

    Hello,
    Since I update my Time Capsule(7.5.1), I cannont connect my ipod touch to wifi time Capsule.
    message ipod is : impossible de rejoindre le réseau RES_Didier
    My iMac is connected, my PC Windows is connected ans my Apple TV to.
    Only my ipod cannot connect.
    But, if i connect my ipod to an other wifi network it is ok.
    That is only with my time capsule that I cannot connect wifi!!
    Do you know why ? can you help me ? (sorry my english is not very good)
    Thanks
    Didier

    Did you upgrade install Mavericks? I think this can lead to all kinds of issues.. clean install the OS is the only way.
    Do a full factory reset of the TC..
    Use all SMB names.. that is short, no spaces and pure alphanumeric.
    I strongly recommend when you have trouble.. even different names for 2.4ghz and 5ghz. So you can keep track of where the issue is.
    Also use ethernet.. if you have not got ethernet port, buy a Thunderbolt to ethernet (much the preferred) or USB to ethernet.. if thunderbolt is missing or used.
    Open network utility on your computer and find the listing for the TC.
    ie scan via netstat.
    Make sure you have ipv6 turned on to link local.. this is now essential.
    Use the IP address if it is static rather than name.. and try it in full network isolation by ethernet.
    So Go .. Connect to server.
    AFP://10.0.1.1 (at default IP)
    The default password is public.. you will need to type in a password.
    If it fails the TC could be faulty.
    Use ping via the terminal to make sure the network is working.

  • Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following: The backup

    Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
    The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
    I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.

    If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
    If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
    They might be fixable but I do not know how.

  • HT201250 Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet?

    Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet? i want to buy an iPad Air and to forget my laptop and i think that even the 128 gb wont be enough some times. I am wandering if time capsule can be used as external hdd and to connect on it via wifi ...

    No. You cannot access your Time Capsule directly from an iOS device. The only way to back up an iOS device is to a computer through iTunes or to iCloud, though in some cases you can open and save files via another cloud-based service such as Dropbox.
    Regards.

  • Time Capsule slow in Lion and errors

    hello --
    ever since upgrading to lion i am having a lot of problems with my time capsule. it is running extremely slow, while before it was perfectly acceptable over wifi. eventually i installed the time capsule buddy widget and noticed the error below repeatedly occuring (in bold). i also noticed that all of a sudden it requires 1.89 GB to backup ( !!! ) in the last line, something that never was an issue before. have others encountered similar issues?
    thank you in advance.
    p.
    Starting standard backup
    Attempting to mount network destination URL: afp://Patrick%[email protected]/Storage
    Mounted network destination at mountpoint: /Volumes/Storage using URL: afp://Patrick%[email protected]/Storage
    Renaming /Volumes/Storage/MacBook Pro i7.sparsebundle to /Volumes/Storage/Macbook Pro i7.sparsebundle
    Failed to move /Volumes/Storage/MacBook Pro i7.sparsebundle to file://localhost/Volumes/Storage/Macbook%20Pro%20i7.sparsebundle/ error Error Domain=NSCocoaErrorDomain Code=516 "“MacBook Pro i7” couldn’t be moved to “Storage” because an item with the same name already exists." UserInfo=0x7fb5e32179a0 {NSUserStringVariant=(
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Storage/MacBook Pro i7.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    1.89 GB required (including padding), 397.55 GB available

A: Time Capsule slow in Lion and errors

Same problem here - slow backing up to my Time Capsule. Today I had some trouble after booting my MacBook Pro. Finder got stuck and after some restarts Spotlight re-indexed and everything seems fine. And now backing up is much faster. I used to have a lot of time waiting for indexing. But I still get this error message:
2012-08-26 21:51:49,984 com.apple.backupd: Failed to move /Volumes/Data/Pärs MacBook Pro 111026.sparsebundle to file://localhost/Volumes/Data/P%C3%A4rs%20MacBook%20Pro%20111026.sparsebundle/ error Error Domain=NSCocoaErrorDomain Code=516 "“Pärs MacBook Pro 111026” couldn’t be moved to “Data” because an item with the same name already exists." UserInfo=0x7fb8c050fac0 {NSUserStringVariant=(
    Move
), NSDestinationFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSUnderlyingError=0x7fb8c050fee0 "The operation couldn’t be completed. File exists"}
But it seems that everything is working fine. It's backing up and I am able to restore files via Time Machine.
Should I worry?
Any clues?

Same problem here - slow backing up to my Time Capsule. Today I had some trouble after booting my MacBook Pro. Finder got stuck and after some restarts Spotlight re-indexed and everything seems fine. And now backing up is much faster. I used to have a lot of time waiting for indexing. But I still get this error message:
2012-08-26 21:51:49,984 com.apple.backupd: Failed to move /Volumes/Data/Pärs MacBook Pro 111026.sparsebundle to file://localhost/Volumes/Data/P%C3%A4rs%20MacBook%20Pro%20111026.sparsebundle/ error Error Domain=NSCocoaErrorDomain Code=516 "“Pärs MacBook Pro 111026” couldn’t be moved to “Data” because an item with the same name already exists." UserInfo=0x7fb8c050fac0 {NSUserStringVariant=(
    Move
), NSDestinationFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSUnderlyingError=0x7fb8c050fee0 "The operation couldn’t be completed. File exists"}
But it seems that everything is working fine. It's backing up and I am able to restore files via Time Machine.
Should I worry?
Any clues?

  • I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    A universal may work but reliability tends to be poor..
    You are much better using another airport .. extreme or express.. even a second hand older one.
    Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

  • Maybe you are looking for

    • Site Navigation Question and Help

      Hoping there is a simple solution to this problem. I'm a designer, not programmer so I'm pretty clueless in that regard. Here's what I'm attempting to do. I've managed to create an animation in Edge Animate and everything works fine. I imported that

    • Sharing purchased songs or apps in family with different accounts

      i've an ID apple. Can my mother use my itunes library with her own account? can she use my purchased songs or apps?

    • Problems after itunes upgrade.

      I recently upgraded itunes to the current version on two of my windows/xp pc's. On the first one I didn't have any problems. On the second one, after the pc rebooted, all of the personal settings for the administrator account that was used to do the

    • Background Execution Problem-Docking Container with 2 ALV Grids in one scre

      Hi Friends, I have created 2 ALV Grids in one screen - one below another using DOCKING CONTAINER. The objects are 'g_dock_cont' and 'g_dock_cont1'. I am getting the foreground output as expected with 2 ALV Grids. While executing in background (F9), I

    • How frequent is mail checking?

      I am trying to decide which email service to use on my iPhone So far I have setup Yahoo (which is my real email service), a gMail account and a trial .mac account. None of the settings seems to allow you to say how often the phone should check your e