Time Capsule 2TB, use as multi MAC backup and extra HDD partition question
Hi,
I just purchased a 2TB Time Capsule. I have an intel imac and a PPC G4 laptop, both running Leopard. I don't care about having to start a new Time Machine backup and just discard the old individual ones. I just need to know if I am supposed to Partition the Time Capsule HDD to have one Time Machine volume for each computer and another partition to use for a network storage area.
I have not opened the box yet, but read the manual online with a whole bunch of other information, and I don't seem to find the answer to this situation.
Logically it just doesn't seem correct (or neat) to have just one 2TB lump of space and have it used for many variations.
Thank-you in advance.
Mike
Time Machine will automatically create a sparsebundle file on the Time Capsule for each computer that will look something like this:
"nameofcomputerMACaddress.sparsebundle
The Time Capsule will appear in the Finder under the SHARED heading and you can click to open the Time Capsule Folder to reveal the sparsebundle files there.
By clicking the gear shaped icon at the top of the window, you can also "Add New Folder" and rename them as needed. You can create as many folders as you like.
Similar Messages
-
How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???
Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case. -
New Time Capsule 2Tb does not do FULL backup
I've been using a 500Gb USB drive and decided to upgrade to a Time Capsule 2Tb.
Installation goes without a problem. Everything the manual says should happen, happens. So far so good.
Starting Time Machine, I'm asked if I want to replace the previous Time Machine or use both. I select replace.
Using an ethernet cable to speed the process, Time Machine starts making the initial backup. This should be full.
However, after it finished - no apparent error messages, Time Machine just closed on its own - I decided to check that some of my most important files had been backed up. I have 3 VMs. Only 1 had been backed up!
I'm assuming there will be other files that haven't been backed up. But why isn't this a FULL backup??It is all the information that was backed up in the first one. After it started backing up after the second time I deleted that .plist file, it only backed up 4MB...it seems to be doing that now.
Edit: an interesting error seen in the time machine widget is "Could not mount recovery partition" -
Can Time Capsule be used simply as a backup disk?
Is it possible to disconnect Time Capsule from the network (with router etc) and use it simply as a backup disk for Time Machine? I would like to go back to using ethernet for internet as it is faster.
To be completely accurate, you cannot exclude the Time Capsule from your network, if you want to use it for anything at all. It does not have to serve as a wireless access point or your router but it does have to be available to your network.
You should also connect your Time Capsule using Ethernet for the same reason - it is faster. -
This is the explanation for my my question about whether a time capsule can be used as a backup without being connected to a network. I had to disconnect my time capsule when I upgraded my landline to a wireless home phone in order to go to a wireless security system that would work with my 2WIRE router. The time capsule blocked the usage of my camera on my security system, not allowing the camera to connect to the 2WIRE router. Once I disconnected the time capsule, the camera was able to connect wirelessly to the 2WIRE.
Welcome to Apple Support Communities
See > https://discussions.apple.com/message/16717724#16717724
As you can read, you can do what you want. You just have to set up the Time Capsule network in AirPort Utility without connecting it to the router and ignoring the messages, and connect to the Time Capsule network. You will have to switch between the Time Capsule and the other router's networks -
Time Capsule 2TB was working until i disconnected and connected again.
Now the airport utility says "no configured AirPort base stations have been found."
And it has a flashing orange light.
I moved it from the house to another apartment.
I want to get back whats inside of the Time capsule, and back up again.
PLEASE HELP!OK, newer laptops do not have an Ethernet port, unfortunately.
But i am conected to wi-fi on this device (computer) and my iphone.
Is this the Time Capsule WiFi signal, or does the complex provide a WiFi signal?
So internet is working.
So, you can connect to the Time Capsule WiFi and get an Internet connection on your laptop and the iPhone?
Or, does this mean that you are connected to another WiFi network (not the Time Capsule) and you have an Internet connection? -
How to use AirPort Time Capsule 2TB as an external storage hard drive only?
I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer. -
Mirror or backup one Airport Time Capsule 2TB to another over the internet?
Hello, is it possible to mirror, or backup, one Airport Time Capsule 2TB to another, at a remote location over the internet?
Much appreciated.Copying a backup is actually a poor way to make reliable backups.. because an error creeps into the backup and the copy simply replicates it.
I would use a USB drive plugged directly into the computer, and use a software like CCC to make a bootable clone.. I tell you honestly.. it is just wonderful when you have disk issue in a computer to be able to plug in a hard drive and boot the computer from it. Especially Macs with their hard to reach drives. Changing a drive on a PC laptop or desktop computer is usually trivial. It is far from trivial in a Mac.
Use two USB drives and swap them over to offsite weekly. Then use cloud for incremental in between.. or a combo of the TM .. TM can backup to multiple destinations.
See http://pondini.org/TM/34.html -
The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available. Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
When I go into the time capsule - it shows me NOTHING as being in the backup datas. So, I don't know where to begin to delete all the old data off the
time Capsule and start with a completely empty machine.Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes -
180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"
Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers. -
I am a first time user of the new airport extreme time capsule 2TB. I use a macbook pro and imac. I installed the router today and got on wirelessly. BUT I cannot get my 2 printers that were previously wireless to find the router signal. The worked fine on my current set up OS Mounitain Lion 10.8.4. Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue. Any help appreciated.
birdmanjay wrote:
... Apple tells me it is the printer mfr issue and printer companies tell me it is apple issue.
Arguably, they're both right.
Changing your router changes everything, so your best course of action is to research the respective printer's documentation and determine how to reset them to factory default condition. Then, add them again using System Preferences > Print & Scan.
For that, I recommend you first "reset the printing system" according to these instructions: Mac OS X: How to reset the printing system. Its instructions for Lion are identical to those for Mountain Lion.
As the article states, it will remove all your existing printers, leaving the Mac's printing system in a similar "factory default" condition ready for you to create a new print queue for each printer, which you should probably do.
Apple's printing support documents contain a great deal of redundancy, but this one may be a good place to start: OS X Mountain Lion: Set up a printer to print wirelessly -
hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me????hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me???? -
I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?
You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend. -
I bought a new Time Capsule 2Tb. I connected it to my internet router. I manage to set it up as base station but when i try to use it with time machine I always get the message "Check your IP addres"? What am I doing wrong? On my computer I have OSX 10.7.5
What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network. -
I have a new mac book pro and and older MAC desktop. Both are backing up to my time capsule but it is close to full (1TB). If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers? If so how do I do this? Thanks in advance.
If you add another Time Capsule, you can have one or both Macs backup to that new device.
However, please note that it is not possible to have backups "carry over" seamlessly from one Time Capsule to another.
If you add a new Time Capsule, each Mac that is backing up to the new device will make a new complete backup and then backup incrementally after the master backup is completed.
Maybe you are looking for
-
Systems are not visible in SM Work Centers
Hi, I am facing strange problems in the Solution Manager Work Centers. I have connected some managed systems to the Solution Manager, their data can be displayed normally in SMSY, SLD, solution_manager, ccmsping availabilty in RZ20.... But when I go
-
We have an Intranet site created using 10g. When users choose to view larger text size from the Explorer View>Text Size>Largest, the text size on screen does not change. Can anyone tell me why, is there something we are doing wrong? Anyone else have
-
How do I get my G5 & FCP to stop hesitating 10 to 20 seconds at every edit?
I can't seem to get my FCP (latest version before 6) and my G-5 powerac to stop from hesitating 10 to 20 seconds everytime I do an edit. I've had to compromise my projects, because it's difficult to be creative in the editing when you can't see the r
-
Dear We are on 11.5.10, right now there has already been defined payment method unfortunately system is not allowing to update or correction any change therefore i want to create new entry by making end previous end but don't know how to do this. Cou
-
OTF TO PDF IN SCREEN PROGRAMMING
in module pool it is showing that, "OTF end command // missing in OTF " when iam running my program IF OK_CODE = 'BACK' . CALL FUNCTION 'CONVERT_OTF' EXPORTING FORMAT = 'PDF' MAX_LINEWIDTH = 132 ARCHIVE