Time Capsule 3T WiFi very slow, just 0.4Mbs.

When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
I tried to turn everithing off and turn them on one-by-one, from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
How can I fix it?
The AirPort Utility does not offer any resource to do it.
It had been running just fine since installed on October/2013 and I noticed that it was getting slower in the last 5 weeks and now it is slow all the time.
I can do the basic on MacAir but AppleTv just do not allow me to watch a movie on Netflix (I can browse through all windows but the movie won't start).
Thanks for an answer,
edudrey

edudrey wrote:
When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
Just need to confirm a few things.. 2.5Mbps is very slow.. if you use b for bits as we try to do.. if you mean Bytes, then that is ok. We try and use B for Bytes.
from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
So you are getting internet via wireless.. not from standard cable or adsl modem?
What is the modem and is it a router as well??
How is the TC connected to the modem router and in what mode??
If you use any client on the TC wired, can you test it??
If you use wireless have you made sure to use all names that are short, no spaces and pure alphanumeric.
Mavericks now uses SMB networking by default so it can help..
More importantly the ipv6 is set correctly to Link-Local.

Similar Messages

  • Time Capsule Disk is very slow

    Hello,
    I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
    I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
    It took about 16 hours and at 90% it crashed.
    After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
    CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
    I turned off Spotlight completely without a difference in copying speed.
    I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
    Thanks a lot!

    -To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
    Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
    The standard setting of the router is "DHCP + NAT" right?
    Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
    Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
    best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

  • 4Th Generation Time Capsule Running Backup very Slow

    I am having a problem with my 4th generation time capsule as it is running very slow , it shows that i need to backup 151 Gb data and for the last 2 days the device backup only 150 mb, pls advise what is the problem? setup of the wireless network seems fine to me without any problem
    please help

    When you use ethernet, make sure your wireless is turned off in the computer.
    It can be worthwhile isolating the TC to the Computer so there is nothing else happening.
    Also for Mavericks ensure you have ipv6 set correctly to link-local.
    A 100GB backup certainly should not take 20hours..
    Although the 2008 (gen1 TC is much slower than later versions).
    A first backup of the computer must deal with loads and loads of little files, as a warning can go slow.
    A different backup software will be just the same.. it is the speed over network and handling small files that is the issue. Once that first backup is done the later incrementals should not be a problem though.

  • Time Capsule + Airport Extreme very slow internet connection

    first time post here, looking for some help.
    I have a small wireless network at home which runs as follows.
    Modem - time capsule (acting as wireless router to macbook pro) - ethernet connection to iMac
    I would like to extend the range of the wireless network as we dont get signal upstairs. To do this I have added an airport extreme to extend the signal (as someone gave me one for christmas!).
    The network works fine, signal is great all over the house however internet traffic is very very slow when devices are connected to just the extreme station (ie when out of range from the time capsule).
    Does anyone have any suggestions as to why my internet connection upstairs is very very slow?

    Thanks for the reply. It seems to have helped a little - should I expect slower speeds from the extended network?

  • Time Capsule connection is very slow on windows 8

    Time Capsule wireless connection  is very slow on a Samsung windows 8 computer.
    Any advice? It is placed next to my mac and the speed is 20% less (often more)
    If I move the computer into the livingroom (about 10 meter) the speed is reduced with 95%.

    Windows 8 drivers are still developing.. download the drivers from the wireless manufacturer not Samsung and try it.
    I am not surprised though at differences between wireless.. card using different chipsets and different antennas will give totally different results.
    But you can help a bit.. setup the TC with SMB names.. short, no spaces, pure alphanumeric.
    Set the name for 5ghz different to 2.4ghz so you can change over.
    Set the security to WPA2 Personal which is the only one suitable for N wireless at home without a server.
    Set 2.4ghz to manual radio channels and test, channel 1, 6, 11 in turn.
    Try up close using 5ghz as it is faster.. but to get full speed you need a broadcom 450mbps card..
    Remember wireless chipset like atheros and broadcom never quite see eye to eye.. it is one reason you buy the same brand.
    Solution.. buy a cheap edimax wireless router.. plug it into the TC and use it for wap only.. I just did this for a friend.. works much better than TC or airport extreme on a PC. But I have not used win8 yet.. no idea if that is going to be problematic.

  • Time Capsule HDD is very slow

    My new Time Capsule  Hard disk data transfer is very slow and taking lot of time to copy single item, I connected my time capsule thru an existing wireles network instead of creating a new network, pls suggest how can i make it fast to access data or copy data.

    You are connected the wrong way..
    Plug into the main router via ethernet with the TC in bridge mode.
    Setup wireless to roaming with the current network.. ie same wireless name = SSID and same security settings.. wpa2 AES = WPA2 Personal and same password.
    Or simply turn off wireless in the TC.. use ethernet for fast speeds.

  • Time Capsule external drive very slow for backup

    I am experiencing very, very slow backup times using an external drive attached to my Time Capsule. When I recently added a 3 TB Rocstor external drive to my mid-2011 iMac using FireWire, I included it in the drives to be backed up. The internal 2 TB of storage in my Time Capsule was no longer enough, so I plugged a 4 TB WD My Book Studio drive into the Time Capsule's USB 2.0 port and specified this WD drive as the only backup storage. The first backup took almost 48 hours. Now the Time Machine keeps trying to back up about 400 GB - 500 GB (though there haven't been any changes) and is transferring about 400 KB/sec over Ethernet from my iMac to the Time Capsule's external drive. What am I doing wrong? (I recently upgraded the iMac to OS X 10.10.2 Yosemite.)

    Frankly, I have no way to gauge your network setup, so I can't really tell you what you should expect. I can tell you from my own experiences using a local network based on a 3rd Gen. Gigabit Ethernet AEBS that using Ethernet the average throughput (not interface) was in the neighborhood of 16-20 MBs/sec. The average throughput for a USB 2.0 drive connected directly was about the same.
    This works out to an average throughput of around 60 GBs/hour. Depending upon file sizes and number of files being transferred a USB 2.0 drive might reach 100 GBs/hour, but that is a rare outcome. The USB 2.0 drive interface speed is about the same as FireWire 400 - 400 Mb/s or roughly 50 MBs/sec. This is what I know from measurement. Do not expect Ethernet to be any faster for throughput.

  • Time capsule disk operations very slow

    Hello,
    My time capsule became very slow since a few days.
    File transfert from any computer s(Mac and PC) on the network to the tme capsule is now extremely slow. Does not matter if I user Ethernet or Airport.
    No configuration change have been made neither network change.
    Thanks in advance for any help.

    -To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
    Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
    The standard setting of the router is "DHCP + NAT" right?
    Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
    Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
    best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

  • Time Capsule/Airport is very slow...

    Just bought a new 1TB Time Capsule. I replaced my old G router, set it all up in Airport Utility and Time Machine. My network consists of two MacBook Pros, a silver-door G4, and an Apple TV. I'm using the WPA Personal security - the one that requires 13 characters. I'm having two problems...
    1) The performance of my network seems significantly slower than it was with my old Linksys router. Web pages access seems slower, and now a movie that should take only 30-40 minutes to download into Apple TV is now going to take 5 hours?
    2) Because I'm going to back up three computers, I decided to only set one to do it's first big backup at a time. I set it (the G4) to start a backup when I went to bed, and when I got up only 3 gigs had been backed up.
    Although I wasn't expecting lightning, I did expect the performance between the Time Capsule and the MacBook Pros to be faster. And is the backup really supposed to be that slow? I could be waiting over a week or more to get my first computer totally backed up. Am I missing something?
    Bill

    Forgive the size of the post, but the suggestions below have helped others with similar issues. Try each topic individually and see if things improve, If not move on to the next one.
    *Keep the Time Capsule Cool*
    Some posters have observed that when they positioned the Time Capsule for better ventilation and cooling, their network connectivity issues resolved themselves. Also avoid locating the devise within poorly ventilated cabinets or piling items around or on top of it.
    *Time Capsule Orientation*
    While the location you chose to setup your Time Capsule may be acceptable, but the direction it is oriented can have an effect on signal strength. It appears that the signal of the Time Capsule does not radiate equally from all sides of the devise.
    The antennas within the devise are positioned along the 3 smooth sides. That is, there is no antenna on the side bearing the ports and cables. As a result, position the devise with the ports and cables AWAY from the direction of most of the clients that will be connecting to it.
    *Cordless Phones*
    Some users have discovered that the cordless phones they have in the home occupy or are near the same bandwidth as their wireless network (2.4Ghz or 5Ghz). Try temporarily disabling the handsets and their bases and see if network connectivity improves. If so you may need to change the channel that the phone uses or purchase phones that occupy a different bandwidth.
    *Preferred Networks & Airport Services*
    You may be experiencing interference from other networks in your neighborhood. When you click the Airport menu are there other networks listed other than your own?
    If so, is your network at the top of the list? It should be.
    Go to System Preferences --> Network --> Select Airport on the left.
    Click "Advanced". In the “Airport” tab note the various local wireless networks that Airport detects. Is the network you prefer to connect to at the top of the list? If not drag it to the top. Are there other networks you never intend to connect to (an old work network, or a neighbors network)? Then highlight them and click the "-" button.
    Make sure “Remember any network this computer has joined” is checked.
    Click "OK".
    For "Network Name" be sure your network is selected and then click "Apply".
    Is Airport (wireless) your primary means of connecting to your network? Is so, is Airport at the top of the list of services on the left? It should be.
    Click the small “Gear” button at the bottom of the window and select “Set Service Order”.
    Now drag Airport to the top of the list.
    Click “OK”. Click “Apply”.
    Now see if network connectivity has improved.
    *Transmit Power & Wide Channels*
    If you are using the 802.11n only (5GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
    Launch Airport Utility
    Select your Time Capsule on the left.
    Click “Manual Setup”.
    Select “Airport” in the toolbar.
    Click the “Wireless” tab.
    Click “Wireless Options...” at the bottom of the window.
    Adjust the “Transmit Power” to 100%.
    Put a check mark in the box labeled “Use Wide Channels”. (If you are using a 802.11a/b/g (2.4GHz) radio mode then select “Interference Robustness”)
    Click “Done”.
    Click “Update” in the lower right hand corner.
    Wait for the Time Capsule to restart and then see if your network speeds improve.
    *Reduce the DHCP Lease Time*
    Some have found that reducing the DHCP lease time improves their network connectivity.
    Launch Airport Utility
    Select your Time Capsule on the left.
    Click “Manual Setup”.
    Click “Internet” at the top of the window.
    Select the “DHCP” tab.
    Change “DHCP Lease” to a shorter time.
    Click “Update” in the lower right hand corner.
    Wait for the Time Capsule to restart and then see if your network improves.
    Let us know if any of these suggestions improve your situation.

  • Time Capsule suddenly producing very slow internet connection

    I use my TC as a router and back-up.  The internet connection is suddenly very slow and unable to load some more complex web pages.  I plugged the cable modem directly into my MacBook Pro and the connection is fine, so I do not believe it is our signal from the internet provider.  Yesterday I was unable to locate my TC back-up files on my computer, but today I could. 

    thomsenbrønshøj wrote:
    Same scenario. firmware 7.7.3. Drops from 8Mbit direct to 0,2Mbit through the Time Capsule (latest version 2TB).
    Have a try naming the two wireless bands differently.
    ie TC24ghz and TC5ghz .. then force the Sonos to use 2.4ghz and force the computer to use 5ghz.. do you get any improvement??
    If not the TC could be faulty on the wan side.. to test you need to do actual file transfer tests between the client and the TC.. copy a large file to the and from the TC hard disk.. it should go at up to 50MB/s over ethernet and around 10-15MB/s over wireless.
    The WAN issue with some modems is difficult to track down.. if the TC is new return it.. or still in warranty at least get apple to test it.

  • I just got a new MacBook Air -- Moving data over from the Time Capsule over WiFi??

    I just bought a new MacBook Air because my MacBook Pro 2008 died completely. I own a Time Capsule and it backed up regularly. I'd like to just move over all my data to my new 256GB MacBook Air, but it doesn't seem to be recognizing the Time Capsule over WiFi? I had the Time Capsule set to backup over Ethernet. Does this mean I can only access my files vs. Ethernet? Does that mean I need a USB to Ethernet adapter?

    Backing up other Ethernet doesn't prevent access via Wi-Fi.
    If the Time Capsule creating a wireless network?  If not, you'll need to configure it to do so in order to allow the MBA to connect to it.  If it does, can you connect the MBA to the Time Capsule's network?
    Depending on the amount of data you want to transfer, using a USB-to-Ethernet adapter would help things run faster.

  • Time machine backup is very slow after migration to Mountain Lion

    After I migrated to mountain lion, Time machine backup is very slow. Time machine preference says there is no previous back up although I had Time machine on before migration. It did not help verymuch to connect an ethernet cable between my timecapsule and my Macbook Pro
    Here are the screenshots I see:
    Should I erase the previous backup made on Lion before backing up on Mountain lion? in this case how do I transfer the Lion backup file on another disk just in case something goes wrong before I have a good backup under Mountain Lion? just like any other file?

    After further reading on the forum, the problem was solved: I used the possibility to back up on a second disk (in the preferences Time Machine choose a disk and save on both disks) to make a back up on another usb disk, and then erased the old .sparsebundle file on my Time Capsule. I have then re defined time capsule as the back up disk and then the backup was muuuuuch faster (one night instead of less than 1 giga after 3 days.....)

  • Can I use my Time Capsule for wifi parental control?

    Can I use my Time Capsule for WiFi parental control.  The objective first is to use a time clock to control internet access (completely on or off).  Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control?  Anyone out there have any tips on making this work?  We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi.  Any information including other alternatives would be most appreciated.  Surely we are not the only parents on the planet with this issue.  Thanks very much!

    how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
    What wireless devices are we looking at here?
    Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
    Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    Look for Wireless Clients and click on the numerical IP address that is displayed
    Another box will open
    Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
    Write that down and note that it is your Mac.
    Now, connect another wireless device and repeat the sequence.  Click on the "other" listing that you see to find out more info about that device.  Write down the ID or Address and note what device it is. Then power it off.
    Do the same for each wireless device that you want to have limited access.
    Post back when you have all the info.

  • Time machine ethernet backup to time capsule works, wifi does not

    Hi all.
    I recently updated my old time capsule to one of the new tall ones ME182X/A with a 3GB drive.  I transferred over the backup file of my Macbook Pro according to the Apple instructions (Time Machine: How to transfer backups from the current backup drive to a new backup drive) and whilst connected via an ethernet cable, time machine works fine with the new time capsule.
    However, when I disconnect the ethernet cable and connect to the time capsule over wifi, time machine hangs on "preparing backup".  I do not get to "xxMB of xxMB" or any error messages.  I've tried the following:
    reconnecting via ethernet after restarting my Macbook Pro (running 10.9.5) allows time machine to start and complete the backup.
    I've tried deleting the ".inprogress" file, as per some websites, but this doesn't solve the problem
    turning off spotlight, doesn't help
    I have no anti-virus software running
    restarting the computer, resetting SMC, restarting the time capsule - no help.
    The wifi side of the TC is working perfectly otherwise.  I can "see" it with Airport Utility, and mount the drive and explore it without any problems.
    Any suggestions?
    Thanks again,
    John

    Here are the steps I would use.. do not connect by ethernet at all whilst you do them.
    Factory reset the TC.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Redo the setup with different names. Short, no spaces and pure alphanumeric. eg TCgen5 as base station name. TCwifi for wireless name.
    Make sure the password for disk and wireless etc.. are 8-20 characters pure alphanumeric mix of case and numbers.
    Reset TM then to the new drive location.
    See A4 pondini for a full reset.
    http://pondini.org/TM/Troubleshooting.html
    Strongly recommend you also verify the backup and install the Widget.. A5 and A1. The log you get from the widget is a big help to see what is going wrong.
    Ensure the ipv6 is set to link-local only in wireless.
    I would do the whole lot but you can test at each step if you want.. I just had it happen to me.. first time in 12months and regular posting in this area. Doing the above got me going again.. although it takes a bit of patience to work through the lot.

  • Time capsule as wifi extender

    I have set up my time capsule in wifi extender mode and now I have lost acess to my backup disk in time machine. Airport Utility can not find my time capsule. I am currently using Mac OS X v 10.6.8. Thanks for the help.

    The Time Capsule can be used to extend the wireless network provided by another Apple (Express, Extreme, or Time Capsule) base station. What is the make & model of the wireless routers that he is using? Just to make sure I understand, his network configuration is such that he is extending one wireless router with another that is located in your part of the duplex ... correct?

Maybe you are looking for

  • DYNAMIC PL/SQL BLOCK

    Hello, My requirement is to create procedures on the fly and call the created procedures. The pl/sql code for the procedures are stored in the tables. I was able to create the procedure on the fly. But it ended being an invalid object. I got this err

  • Supply Chain working with SAP

    Can Supply Chain co-exist with an SAP implementation? And, to what extent? Thanks

  • OAF:How to create a lov

    Hi friends ,help me to learn OAF Iam new to oaf i hav started leatning one by one in OAF I hav created a QueryPG with 3 field (PersonId,FirstName,PhoneNO)...and i can able to query the data from the DB And i hav created a CreatePG with fields (Person

  • Check for transaction interface failure from POS to POSDM

    Dear experts, Would like to see if in your experience, you have encountered any report or functions that allow users in POSDM to check if sales transaction from a particular store has failed to do the inbound interface from POS to POSDM? I am persona

  • Setting for RF IN WM

    hI Gurus, I have done Entire Setting for RF in Ware house , But at LM00 system Showing following error. "Profile for user MCLPM is not active"