Time Capsule 7.5.2 and PPPoE Connection
Since updating my (old) TimeCapsule to 7.5.2 I notice a strange behavior of my PPPoE connection established by the TC.
The TC opens a t-online dsl PPPoE connection which is only active for 24h and then gets new IP, before 7.5.2 I could see that TC started to re-connect after exactly those 24h.
Now, TC is still fully functional BUT displays currently "8d 00:01:14" as connection time - positive side-effect it does not lose the Time Capsule connection as well.
My question - how can I now force TC to restart the count, except by pulling the power plug of the TC ...
My question - how can I now force TC to restart the count, except by pulling the power plug of the TC ..
Pull the power plug, or
Open AirPort Utility - Manual Setup
Locate the Base Station menu at the uppermost top of the screen to the right of the Apple icon
Click Restart, then click Continue
Similar Messages
-
When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !
You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
Is this ADSL?
Do you have the modem in bridge?
How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported. -
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
I am unable to connect to my internet via. wifi on my Playstation.
I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
Please help?
I tried being the most descriptive I couldI am only able to connect to the internet on my main computer.
What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
When you open the airport utility on the main computer.. click on the TC what errors does it show?
They will list in the summary.
What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
What model TC do you have??
You can slow the LAN port down or specify the actual speed in the Gen1-4. -
How to use time capsule as hard drive and connect with existing net gear router
I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
ThanksAnd I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html -
Airport time capsule 2 TB. All is connected and Wi-Fi is working but light still flashes amber rather than solid green. I have tried to reset but this still happens. Is there a way to fix this or do I need to?
You want to see a green light on the Time Capsule.
Once you have set up the Time Capsule initially, a flashing amber light indicates that the Time Capsule has a message for you....possibly about a network condition or notice of an update that is available.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the amber dot and another window will appear to provide the current status....along with suggested actions to remedy the flashing amber light. -
I recently purchased a Time Capsule to store data at my office. I have an Apple TV at my home that I would like to start using to play my movies. With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV. Does this sound possible? We have an iMac at the office that remains on 24/7 connected to the TC.
ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more. -
How to Set Up Time Capsule With Airport Extreme and Airport Express
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my housActually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice. -
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
Airport Time Capsule Problems Since Snow Leopard - Loses Connections
I did a straightforward install of Snow Leopard on the iMac 24 and it went fine. I have very few apps on it so nothing weird running to cause two issues:
1 - Time Machine backups to a Time Capsule have become slow and unreliable. Also, even 10-100 MB file transfers to a MacBook Pro 17", also on Snow Leopard, took the longest time.
2 - The Airport/WiFi icon will often go from being a static icon with full signal to one in which each curved concentric level bar flashes one by one up from the bottom dot to the topmost arc, and then back down, and back and forth. This often happens in the middle of Time Capsule backups. Holding down the mouse on the icon shows my network still connected, but the backup fails, and any web page attempted will also report there is no network.
I wonder if others have had similar problem(s).
ImranI am also having very strange problems with 10.6.1 and TC. The network disconnects for no apparent reason, frequently. It seems to be tying up both of the phone lines too, because once the TC reconnects to the network, the telephone no longer works (it says "line busy" and remains that way until and unless I unplug the TC). Plugging directly into the cable modem works fine, no problems at all with the telephones or with the network disconnecting at random. All three macs on my home network (macbook, MBPro and iMac) are updated to 10.6.1. At first I thought the problem might have been the modem itself but it works fine; it's only when the TC is connected that the weirdness happens.
-
How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE
I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?
I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
I didn't see a partition option. Where is that? Just curious.
Thanks! -
Time capsule wil not alow iphone to connect by wifi.
My iphone can not go WIFI from my time capsul. When i try to connect i gett the message "could not conect to my network"
How do i fix it?
JohnnySet the 2.4ghz network to a new name.. I suggest TC24ghz. (name should be short, no spaces and pure alphanumeric).
Test the channels, 1, 6, 11 in reverse order.. ie 11 is usually the free one.
Test with WPA2 Personal security and a short pure alphanumeric password say 10 characters.
No luck remove the security and try it.
No luck take the TC back to Apple for testing. Take your phone with you. Ask apple to setup the two. -
Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.
Maybe you are looking for
-
The chapter about php_db4 in the BDB documentation need to be updated
Hi all, I think the chapter about php_db4 in the BerkeleyDB documentation should be updated. The first sentence "A PHP 4 extension for this release of Berkeley DB..." gave me the concept that the extension can be ONLY run with PHP 4. I've got the ide
-
I can not get the Iphone 5 to send out aol mail. I have added the extra smtp server as suggested and it still will not send mail.
-
Dr. Damien's Development - The Xylophone Project VIII - Configuration Dialog
The Configuration button was made active in this installment. The following changes were made. A full complement of Get and Set members were added to the NoteCalculations class. These were simply copied from the original members and the names and ico
-
Making type change color on rollover: Cant make it work
Incredibly, I can not figure out how to make hyperlinked text change color on rollover. I thought it was a matter of assigning a new CSS rule, but I cant find the dialog box within which to specify a rollover color. I cant believe how difficult and o
-
Time Distribution in a Transformation
I'm trying to distribute from calmonth to calday in a BI transformation based on the factory calendar. I used to do this in an update rule in BW. I don't see a date function for it in the formula options. Thanks! Tim