Time Capsule 802.11ac - SMBv1.5 and NTLMv1 authentication

2015 is coming...
Why are protocols in Time Capsule so old?
What about firmware update with SMBv2 and NTLMv2 support?

Are your questions for Apple?
If yes, you have posted on a forum of users.....just like you.....and it is extremely unlikely that anyone from Apple will ever see your post here. Even if they might, they will not answer on this forum.
You might want to contact Apple directly here:
Apple - Time Capsule - Feedback

Similar Messages

How to Setup Airport Time Capsule 802.11AC on Verizon fios

I just got an Airport Time Capsule 802.11AC and i would like to set it up on to my existing verizon fios router as you can't change their router as the cable box works with it does anyone know how to do such a thing?

Setup is amazingly quick and easy, assuming that you connect a permanently installed Ethernet cable from one of the LAN <--> ports on the Fios router to the WAN "O" port on the Time Capsule, and then use AirPort Utility on your Mac or iPhone/iPad for the setup.
We need to know what operating system you are using on your Mac to provide any specific setup details. Or, let us know if you are going to use an iPhone or iPad for the setup.
The Time Capsule will set up another wireless network, so if you do not need two networks, you can turn off the wireless on either the FIos or Time Capsule. If you decide to have two networks, be sure to separate the Fios router and Time Capsule by 5-6 feet or a few meters.....to minimize the chances of wireless interference occurring between the two devices.

Extending Wireless Network Is Crippling Data Speeds - Time Capsule 802.11ac

Just set up a new Time Capsule (3TB ac) to replace my older 2TB dual-band TC. I had successfully been running a network with another dual-band Airport Extreme (bought this year/the model before current one) extending from the older TC.
Now when I extend the network using my new TC and the same, older AE, the whole networks grinds down severely. Most times, pages dont even start to load for 10-20 seconds, and then I watch the load up slowly. Testing the speed on Speedtest, the data seems to stop and start a few times, sometimes peaking at around 30Mbpsm but the rate is all over the place.
The second I turn the wireless Network Mode to "Off" on the AE, the system comes right back up and Im getting my constant 60 Mbps.
Im up to date on all firmware.
Running OSX 10.9
This is a days old iMac 27" i7
Something seems seriously wrong here and Im at a loss for figuring it out. I was hoping the new range of the TCs would allow me to get rid of the extending AE altogether, but even in my modest sized home, the network is sketchy from the opposite end of the house. So unfortunately, Im going to have to figure something out here. I really hoping the answer isnt to buy a new AE with ac.

You are aware that you must completely reset a cable modem whenever you change the device that is connected to the modem, correct?
The cable modem may need a power down period of up to 30 minutes, sometimes longer.
The reason for this is that the cable modem associates with the first device that it connects with. If you connect another device, the cable modem "remembers" and "looks" for the old device. When it does not see it....because it is no there.....it refuses to give out an IP address to the "new" device.
The trick is make the cable modem "forget" the original device, so it will associate with a new device.
If you want to try the 802.11ac product, see this excellent User Tip provided by forum expert Tesserax for the correct setup.
AirPort - Complete Power Recycle

New Time Capsule (802.11ac) issues reading files on USB drive

My 802.11ac Time Capsule reguarly fails to read .mp4 files stored on an external HDD drive connected to the Time Capsule via USB. All the files were tested as working when they were copied over, then for some unexplained reason the Time Capusle refuses to recognise them when they are accessed at a later time. This happens for about 1 out of 3 files (sometimes more). All the files are .mp4 format video files. Detacthing the Seagate drive from the Time Capsule and connecting it directly to the MacBook Air fixes the problem and allows the files to be read and played normally – this indicates the problem is with the Time Capsule, not the Segate drive.
Symptoms;
1) iTunes generates a file error with trying playing the video from iTunes,
2) selecting the file from Finder no longer generates a playable preview thumbnail as the Finder preview box remains blank (white),
3) attempting to play the file from Finder generates an unrecognisable file error in QuickTime,
4) connecting the external drive directly to the MacBook fixes the problem (the file can be read and played normally),
5) the files remain readable after reconnecting the external drive back to the Time Capsule, however the problem just reoccurs again later.
My normal use case is playing movies and TV programmes from iTunes to my television via Apple TV. Apple TV plays the video files over WiFi from the iTunes Library on my MacBook Air. The video files in my library are physically located on the Seagate external HDD attached to my Time Capsule.
I use a mid-2012 MacBook Air 13" running Mountain Lion 10.8.5. I have an 802.11ac (2 TB) Time Capsule (latest firmware 7.7.1) with a Seagate (1 TB) GoFlex drive attached (to the Time Capsule) via USB 2.0 (USB powered). The Seagate is my media drive and holds all my movies and TV programmes (all in .mp4 format). Both drives are Mac OS Extended (Journaled) with single partions. Time Capsule network is set to Bridged mode to resolve double NAT. I have an Airport Express extending the wireless netowrk to my MacBook Air. Prior to errors occuring, all files tested ok as follows; file plays ok locally on MacBook Air, files play ok from Finder after being moved to the Seagate, files play ok from iTunes library (pointing to Seagate).
Disk Utility verifies the Seagate drive has being OK. No other network issues.

Problem Solved!
The 1TB external HDD attached to my Time Capsule was divided into 2 equal partitions. The first partition used to be my Time Machine backup which I deleted and made available as free space. The second partition was the one I was copying to. It seems the Time Capsule has a problem with blank partitions on an external HDD. Once I repartioned the drive into a single 1TB partition, everything worked fine and my Time Capsule no longer crashes.

Apple TV and Time Capsule 802.11n -- idle timeout and group key stuff...

I've been having some wireless issues since moving to a Time Capsule to provide my 802.11n service.
I have my time capsule setup as an 802.11n only router, on a 5 ghz band only, with WPA2 security (AES-CCMP.) My reception is great -- but I've noticed in the logs that there's an idle disconnect that seems to occur about every 10 minutes.
What seems to be happening is that when the idle disconnect occurs, the AppleTV renews its connection. The problem, at least 90% of the time, is that if the "group key timeout" value in the Airport Admin Utility has been passed AND the idle timeout occurs, the unit appears to be unable to connect to the network unless you reboot OR reenter the network password.
The Time Capsule is setup strictly from a networking standpoint as a wireless bridge -- I have an existing network DHCP server, and during the disconnects, a DHCP renewal is not occurring.
Another observation when this issue is occurring: on the "Network" settings page, instead of selecting wireless network, you can select TCP/IP, and select "DHCP" and the unit will state that it has successfully connected to the network, and states the network name. The Time Capsule though doesn't show an active client; I have to assume this is some sort of bug.
Since the unit works fine after a reboot, I have to assume something isn't quite right with the way it is attempting to reconnect to grab an update group key after an idle timeout occurs.
I'd like to test this further, but I can't find anyway in the Airport Admin Utility to change the idle timeout value. There's a place to enter the group key timeout, but not the idle timeout.
Has anyone else noticed this behavior and found a way around it?
Message was edited by: Matt Domenici
Message was edited by: Matt Domenici

Just one more follow-up post to say that I continue to have the same problem. (Just picked up my TC and aTV on Tuesday and didn't get a chance to do too much with it until this weekend.
I have the TC running in bridge mode to my FIOS Actiontec router. The Actiontec does DHCP for the home network (has to because of paculiarities with FIOS on MOCA with a cable TV set-top box) and runs an 802.11 g network for all my non-N hardware (iPhone, older computers, etc.). The TC runs 5 GHz N-only, and the aTV connects to that. I set things up this way because I wanted to keep the aTV and my N-capable computers on a dedicated wireless channel for speed.
Alas, I'm afraid I'm going to have to use the aTV on the G network, or perhaps ethernet, until this problem gets sorted out.

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

HT202807 I have a MB Air 128gb and a Time Cap.802.11AC. My HD is maxed out because of 30GB of photo storage after migration to 10.3.3 Photos. Please recommend an external drive best for connecting to TC and moving the iPhoto Lib off my HD

I have a 13" mid 2011 MB Air 128gb and a Time Cap.802.11AC. My HD is maxed out because of 30GB of photo storage after migration to 10.10.3 Photos. I have reduced apps and files as much as possible so the only thing left is to move the photos. Please recommend an external drive compatible for connecting to my TC 802.11ac and moving the iPhoto Lib off my HD which will free approx 15 gbs. of space. I don't plan on using it for any other purpose so a small capacity drive will suffice. I know the "optimization" is supposed to adjust for this condition but I don't trust that assertion.I only have 2gb free space remaining.

I don't plan on using it for any other purpose so a small capacity drive will suffice.
If you really only want such a small capacity drive.. what about just buying a 32GB or 64GB USB memory stick.
You should still have a back up to the internal hard disk of the AC TC.
Or just buy a WD Passport.. don't waste your money buying 500GB as it is only a bit more to buy 1TB and a bit more again for 2TB.. For future use if you do buy a USB hard disk buy 2.5" type.. and buy 1TB or if the budget stretches 2TB..

How do I use Time Capsule as a wireless router and turn my current one into modem only

I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router.
Question #1
How do I use my Time Capsule as a router?
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house. I am assuming this is possible it is I just dont know how to go about doing this myslef without guidance, and the Airport Installer is confusing to me.
Thanks!

Question #1
How do I use my Time Capsule as a router?
Connect an Ethernet cable from one of the LAN <-> ports on your modem/router to the WAN port (circle of dots icon) on the Time Capsule.
Open AirPort Utility and click Continue to follow the guided setup to configure the Time Capsule to "create a wireless network". Select the "Bridge Mode" option when it appears during the setup. (AirPort Utility will normally do this for you)
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Yes
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
We prefer not to guess at things, but since we do not know the make and model number of your modem/router, and this is an Apple support area, we have little choice.
In general, you would enter the default IP address of the device into your browser to bring up the configuration pages (check your documentatio on the modem/router for this information, or it may be on the back or bottom of the device. An example of a default IP address is something like 192.168.1.254
There will be a wireless settings page that will allow you turn off the wireless function of the device.
If you acquired the modem/router from your service provider, they should be able to tell you how to do this as well, or if you check the manufacturer's website, they will likely have a support area for questions like this.
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house.
You will need to log on to the Time Capsule wireless network from each device and enter the password to connect. Most computers will "remember" the setting so that you do not have to enter the password each time that you connect.

Can I use my Time Capsule as a backup disk and storage?

Can I use my Time Capsule as a backup disk and put files from my other USB external hard drive on it, using the TC as an external as well?

Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk.
When...not if...the Time Capsule disk has a problem, you have no backups for this data.
Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

Can I connect my Time Capsule wired to the computer and just use it as a back up

Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

Yes, you simply bridge the TC..
Just google for it as we have posted the instructions endlessly.
The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
None of it is hard so ask for specific instructions if you get to the point.

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
See deadtimecapsule.org
The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
But it is well and truly time to replace.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

Using Time Capsule to Wirelessly Receive Internet and then Extend Network via Ethernet

Hello,
Our modem/router combo is located downstairs, and my computer that i want to get online is upstairs. I cannot get a ethernet from the modem to my computer to access the internet, so I wanted to try to use my Time Capsule to help me get online upstairs (not sure if this is possible...)
My idea was to have the Time Capsule receive the wireless signal and then connect the computer to the Time Capsule through an ethernet so that I may get the computer online. Essentially wireless connection in, wired connection out.
I've been playing around with the device for a while now, and can't seem to make this work. Has anyone used the Time Capsule in this fashion? Is it even possible? If not, does anyone have any suggestions on how to get my computer online?
Thank you very much for any help/input!!

Why not try a pair of these over domestic power loop.
http://www.netgear.com/home/products/powerline-and-coax/high-performance/XAVB510 1.aspx#two
Not cheap though Best buy link
http://www.bestbuy.com/site/NETGEAR+-+Powerline+Ethernet+Adapter+Kit/5042106.p?i d=1218603011817&skuId=5042106
The Apple solution might well need Two devices to extend range.
You would retain your ISP router/modem however would go into settings and TURN OFF wireless on that device - you can do this in the Java Web based control panels on most routers.
Now you sling the Ethernet cable between that router and a purchased Time Capsule device locally and set this up to create a new local Wifi network (Replacing that of the ISP supplied router) . Being a dual band device and being able to broadcast both over 2.4 Ghz and 5 Ghz frequency base bands simultaneously you could well see improved performance and range straight away.
However if not then you are going to need a further device an Airport Express set up in bridged mode somewhere between the Time Capsule and your upstairs rooms. Your may have to try various power points and locations to get coverage required.
Further Airport Express devices can be added in bridged mode as required to cover blind spots, however remember each additional device degrades the overall network performance somewhat.
Again this will get quite costly.

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
If you have another Mac, you may be able to use FireWire target disk mode.
If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

Time Capsule 802.11ac - SMBv1.5 and NTLMv1 authentication

Similar Messages

Maybe you are looking for