Time Capsule - a wireless router?

I'm considering buying a Time Capsule, and was looking at the site recently, and I noticed that the word router kept popping up again and again. I don't understand the jargon, and I was wondering - is the Time Capsule an internet router, or just a hub for internal networking?
I know this is probably a very simple question, but thanks anyway!

Some Internet Service Providers (ISP) require that you enter a Username/Password combination (also known as credentials) every time you need to access the Internet through their service. The two most common methods to "collect" these is either PPPoA or PPPoE.

Similar Messages

Is the apple time capsule a wireless router

is the apple time capsule a wireless router

Yes, it's a 802.11 a/b/g/n (pretty much all the popular wireless standards). If you get the latest generation, it will also give you TWO wireless networks - the main one for you and a guest network. It has dual bands so that your guests can connect outside of your network.
It also has 4 Ethernet ports on the back to connect non-wireless devices.

Time Capsule as wireless router

With Apple Support, I set up my new Time Capsule as my wireless router. I am able to use this network with my iPad, iPhone & iMac. My husband is unable to access this wireless network with his PC laptop & Noika phone; he could access my previous wireless network that used the Airport Express since 2006. Need help on what to do???

Wireless names and TC names should be SMB compatible.. ie .. no spaces.. short.. pure alphanumeric.
Use WPA2 Personal security.
Lock the wireless channels.
Make sure PC is running bonjour for windows.

Time Capsule + Belkin Wireless router, same network to separate slower devi

Alright ladies and gents here's what I got.
I have a Time Capsule and a Belkin wireless n+ router. I want to use my Time Capsule to connect all my wireless n devices using the 5,0GHz band and use the Belkin router using the 2.4GHz band to connect the g devices thus simulating a simultaneous dual-band Wi-Fi, of course all in the same network. I want to be able to see the TC disk from the "slower" devices.
Is this possible?
Any ideas on how to configure?

+I want to be able to see the TC disk from the "slower" devices.+
+Is this possible?+ Yes
+Any ideas on how to configure?+
We're going to need know how you have things configured now. Is the Belkin router the "main" router at this time?
+I want to use my Time Capsule to connect all my wireless n devices using the 5,0GHz band and use the Belkin router using the 2.4GHz band to connect the g devices thus simulating a simultaneous dual-band Wi-Fi, of course all in the same network+
Using the same wireless network name for both the 2.4 GHz and 5 GHz bands, as is done on the Apple "dual band" routers, there will be no guarantee that faster computers will connect to the 5 GHz network if they happen to see a stronger signal from the 2.4 GHz network...which is likely as 5 GHz signals are absorbed much more quickly than 2.4 GHz signals.
Your computer will always connect to the stronger signal...not necessarily the faster signal first, unless you tell it otherwise.
Message was edited by: Bob Timmons

How to setup Time Capsule as wireless router cascaded under another router

I'm lodged on the second floor of a house where I get one ethernet cable coming out of an old 4-port NETGEAR router (connected to an ADSL modem that) on the first floor. The router gets an IP from the ADSL 87.xx.xx.xx and re-leases on the LAN 192.168.0.2 thorugh 99.
Up here I would like to set up my Time Capsule to create a wireless network. I need to use the connection coming out of the downstairs router.
All configurational combinations of these two routers that I've tried (plenty) are giving me horrible network conflicts between the Time Capsule and the down-stairs router. Even if I use static IP (192.168.1.100) and enable bridge mode on my Time Capsule, I get slow pings and 30% package loss pinging 192.168.1.1 (the router downstairs).
ADSL straight to the Time Capsule and assisted setup works fine so cables and my other hardware seem ok.
I've got access to configure all devices as I wish.
Thankful for help.

NO. Things are not ok!
Just as I accepted the package-losses and lowered experienced surfing-speed I realized that I couldn't send mails or upload files to my ftp.
Now I get systematic. I test both my wired and wireless connections with ping and through www.speedtest.net.
Test
Ethernet to my iMac:
Ethernet to bridged TC and wireless to my iMac
Speedtest.net (down)
1.98 mbps
1.90 mbps
Speedtest.net (up)
1.74 mbps
0.02 mbps
Ping* to router
0.8ms (0% package loss)
2.5ms (5% package loss)
Ping* to apple.com
178ms (6% package loss)
190ms (5% package loss)
* Ping averages calculated on 100 pings
What can one conclude / suspect from these numbers? Why does my upspeed drop? I also feel that it's slower to surf wirelessly. I don't feel that the 1.98 to 1.74 mbps drop accounts for that though. I know that conversion to wireless should make for a speed-loss. (I read 10% which seems to be what I measured here).

Set Up Time Capsule as Wireless Router - Now How set up Time Machine?

Time Capsule is performing great as wireless base station set up today. Extended the network and added AirTunes Airport Express - everything works great.
Started Time Machine to configure the TC as the backup device for TM. Time Machine prompts me to "Set Up Time Capsule" and clicking that button brings me to Airport Utility. But there are no settings in the Airport Utility which allow me to configure the Time Capsule as the TM backup location.
Any ideas? Thanks.

Thanks for your reply and the article. It turns out the problem was that when I initially set up the Time Capsule in Airport Utility I checked the "not now" box when asked if I wanted to set up the TC for Time Machine backup. (I figured I could easily come back later to configure the TC for Time Machine.) I had to restart the AirPort Utility process and revert the TC to factory settings and then re-configure the TC while also setting up the wireless network and the Time Machine at same time. All is well now and after 6 hours overnight for the initial backup my iMac is backed up by TM on a regular schedule.

Any way to set up Time Capsule as wireless router WITHOUT Airport Utility?

I'm Macless at the moment and I just had to reset my Time Capsule... now it's showing up as Apple Network blahblah and it's completely visible and unprotected.
Tried the usual 192.168.0.1, .0.2, .1.0, .1.1, .1.2 without any luck. Any way to do this? Do I need to be plugged in via ethernet?
Thanks.

AirPort Utility is the only way to configure the Time Capsule.

Can i use my time capsule as wireless storage and not as a router too?

hi there i just bought my self a time capsule its a 500gb one as i do not need the 1tb+ storage.
i play a lot of online games and have a fast router so i do not want the time capsule for its router capabilitys i only want to use it as a wireless storage unit is this possible to do?
if not i can connect a usb storage to my current router and use that as my wireless storage if so where is the best place to sell this time capsule?

You simply bridge the TC and plug it into the existing router.. it will then provide network storage..
Can connect either via the existing router or the TC.. if you set up wireless correctly.. if it is a gen1 you can set to 5ghz only.. that will keep it from interferring with the existing router.

I just moved and wireless internet is now provided for me. I am not using my Time Capsule as a router anymore but can I still use it as my storage device wirelessly? So far I cannot get it to work. Please help.

Hi,
I just moved to a new place. I used to have my own internet setup and used my Airport Time Capsule as my router. Now that I don't need to use it as a router I would still like to use it as a storage device for my pictures. Can I still do that wirelessly or do I have to plug it into my computer? And if I do (which would really be crumby) do I just use a USB cable?
Please help. I have a lot of work stored on it and I am feeling pretty stuck at the moment.
Thank you,
Charlie

You can use your Time Capsule in your new network in a number of ways. One would be as a NAS device which I believe you are looking to do.
To do so, you would connect the TC to the new router by Ethernet. You would also want to reconfigure the TC as a bridge and disable its wireless radios.
You can do both of these using the AirPort Utility, as follows:
Run the AirPort Utility.
Select the TC, and then, select Edit.
Select the Network tab.
Change Router Mode to: Off (Bridge Mode)
Select the Wireless tab.
Change Network Mode to: Off
Select Update and allow the TC to restart.

Time Capsule used as router attached to Comcast Modem. wireless stops working. All I have to do is unplug the TC and plug it back in and TC cycles up and have green light as well as the Comcast modem operates correctly. TC 4 yrs old. How do I correct?

Time Capsule used as router attached to Comcast Modem. Wireless stops working with no light showing and Link indicator on modem off.
All I have to do is unplug the TC and plug it back in.
TC cycles up and green light appears as well as the Comcast modem operates correctly.
TC 4 yrs old. How do I correct?

I have the latest and greatest Time Capsule and Comcast. Here is the weird thing. If I have one network set up, then occasionally that network will wedge. If I set up a 5GHz and a 2.4GHz network, then one of them (usually the 5GHz) will wedge. I saw this with a previous Time Capsule, Apple said call Comcast. They checked it out and said it was Apple's problem. Apple said maybe you Time Capsule is bad, so I bought a new one. The problem persists.
Tonight it's not complely wedged, but super slow. The 5GHz network is getting 0.45Mb/s while the 2.4GHz network is getting 17Mb/s. Both are coming in from the same Comcast cable modem. Apparently the Time Capsule treats them as separate.
Is it the cable modem or the Time Capsule. I am betting on the Time Capsule, since rebooting it fixes the problem. Resetting the cable modem does not.
Apple is NO HELP at all. They say reset the Time Capsule. Did that fix it? Yes. Problem solved! No, problem not solved. It will happen again in a few hours.
Here's the traceroute. Note what happens a few hops away. At hop number 7 the ping times go up by a factor of 200.
Huginn:~ darrell$ traceroute 128.114.48.10
traceroute to 128.114.48.10 (128.114.48.10), 64 hops max, 52 byte packets
1 10.0.1.1 (10.0.1.1) 0.952 ms 0.886 ms 3.428 ms
2 67.170.200.1 (67.170.200.1) 43.269 ms 27.611 ms 21.004 ms
3 te-7-1-ur01.scotts.ca.sfba.comcast.net (68.85.101.53) 11.252 ms 8.450 ms 9.778 ms
4 te-1-5-0-7-ar01.sfsutro.ca.sfba.comcast.net (68.87.226.14) 15.026 ms 27.372 ms 15.516 ms
5 he-3-9-0-0-cr01.sanjose.ca.ibone.comcast.net (68.86.91.45) 14.374 ms 17.450 ms 24.752 ms
6 pos-0-0-0-0-pe01.529bryant.ca.ibone.comcast.net (68.86.86.122) 14.627 ms 15.408 ms 14.460 ms
7 xe-1-2-0.0.paix0.tr-cps.internet2.edu (137.164.130.233) 1583.490 ms 2697.533 ms 3240.337 ms
8 xe-1-1-0.482--2152.paix0.tr-cps.internet2.edu (137.164.131.62) 2413.800 ms 2937.085 ms 2667.384 ms
9 dc-svl-core1--svl-px1-10ge-3.cenic.net (137.164.46.14) 4362.188 ms 2399.774 ms 1397.535 ms
10 dc-svl-agg1--svl-core1-10ge.cenic.net (137.164.47.120) 588.755 ms 2447.772 ms 1795.253 ms
11 137.164.3.49 (137.164.3.49) 3179.385 ms 1718.755 ms 240.350 ms

How to use my Time Capsule with my Router?

My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580.
I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get my Apple Time Capsule back into my netowrk.
I would either like to understand how to use the Motorola as a switch or just as a modem so I can use the Time Capsule as my router or vica versa, use my Time Capsule as just a back up drive and leave the Motorola as my rwireless router. The onyly thing about this second configuration is that I need to connect to the Time Capsule wirelessly with one of my computers for back up, the other two are both on an ethernet port hard wired.
So this is what I have to put in place:
Motorola Wireless Cable Modem
Time Capsule
5 Port EasyNet Switch
iMac Desktop (Ethernet hardwired)
Macbook (Ethernet hardwired)
MacBook (wirelessly connected to the network)
Any thoughts great appreciated.
Henry

It's likely that your ISP will require that the Cable Modem is the first device in the chain. You do need to set the Time Capsule to Bridge mode, disabling the DHCP. Now, the Cable Modem is providing DHCP to devices that connect to it, and devices that connect to the Time Capsule.
You will be able to wirelessly connect to the Time Capsule and network.
Here is a simple article explaining:
http://www.ehow.com/how5309467bridge-time-capsule-mac-pc.html

I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my hous

Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

Do i have to hardwire connect the Time Capsule to my router?

do i have to hardwire connect the Time Capsule to my router?
My plan was to just add it to my wireless network and keep it for security away from my mac and in a completely different part of the house.

You can but it is a NOT recommended method.. it will be slow and unreliable.

Can i connect my time capsule with my router as a bridge ?

can i connect my time capsule with my router as a bridge ?

I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions.

Question about Time Capsule as primary router

Hi everyone. I'm ready to upgrade my backup drive to take advantage of Leopard's Time Machine. I'm trying to decide between a simple 500 GB firewire drive or spending the extra for the Time Capsule. I have and intel iMac and an older 12 inch powerbook so I understand the advantages of wirelessly backing up my info.
My question is this - in reading reviews, its suggested that I use Time Capsule as the primary router. However, I had AT&T install U-Verse cable and DSL in my house a few months back and it works flawlessly. I'm using the 2Wire AT&T Uverse modem/router as my router. Can I easily make the Time Capsule my primary router without disrupting what is currently a very good network and is it a simple adjustment? Also, if I opt to make Time Capsule part of the network and use my current AT&T router as the primary, will I notice a significant slowdown as some reviews have suggested.
Any help would be appreciated.
thanks
Kory

Depends if you want the fast transfer speed of files. The wireless TC file transfer will be about 8M/sec and ethernet about 15M/sec
Firewire 400 will be about 25M/sec and so will USB2.

Time Capsule - a wireless router?

Similar Messages

Maybe you are looking for