Time Capsule/AirPort Express problem with DHCP server

Hi everyone,
I seem to be having some weird issue with my home network. I use a Time Capsule (2011) as my main router and a new AirPort Express as a wireless bridge (router set to "Extend a wireless network", the LAN port is connected to network printer). Recently, it seems that at least once or twice a week that the DHCP server on my router stops working. Computers that have static IP addresses have no problem accessing the internet or my local network, but devices that don't have static IPs are unable to join the network (over Wi-Fi or ethernet) because they are not being assigned an IP. This never happened before. I'm not sure if it has anything to do with the recent firmware update. Anybody else seem to be having this problem? I am able to get the DHCP server working again by restarting the Time Capsule or by setting the computer or device that won't connect to a static IP. Really curious why this seems to be happening…
Thanks for all the help guys

I am having the same problem with the same setup: a 2011 Time Capsule and an Airport Express. I've had my Aiport Express hooked in for about 2 years, so I know it is not the problem. The only difference I have is the DHCP will stop working on the ethernet, but still work over WiFi from the TC. Rebooting the Time Capsule fixes the DHCP issue.
I am running version 7.6.4 in the Time Capsule.

Similar Messages

Best configuration to extend wifi with Time Capsule & Airport Express

In my house I have a Fritzbox wifi router on the ground floor as my primary internet access. I have an ethernet cable going to the 3rd floor study where the Fritzbox signal is relatively weak. I purchased a Time Capsule as a backup device, but also wanted to extend the Fritzbox wifi network by plugging the ethernet cable in to the TC. I was not successful in extending the network, so I had to create a new network. When moving from downstairs to upstairs, my iphone keeps the connection to the (now weak) wifi network and I have to manually change to the (stronger) TC wifi network.
Additionally, I used to be able to successfully extend the downstairs wifi using my Airport Express (and also managed to have my speakers plugged into this for wireless usage), but do not want to additionally complicate my set-up.
So, what is the best way to connect the following equipment, ideally with the same network name, to ensure I always use the strongrst signal automatically:
Third floor:          iMac,    Macbook,   Time Capsule, Airport Express
          Ethernet cable from ground floor to 3rd floor
Ground floor:     Fritzbox wifi connected to internet

You must configure the Bridge Mode setting as the very last step before you Update the settings, otherwise the setting will change automatically.
In other words, you can change the setting to Bridge Mode, but if you make any other changes before you click Update, the Bridge Mode setting will not take effect.
Or, if you see any error messages about DHCP conflicts or Double NAT....the AirPort is not in Bridge Mode...even though you might think it is. Check the settings again.
will I still be able to set up an additional 5GHz network in parallel?
Yes

Time Capsule-AirPort Express-WDS not working together

According to everything I've read here, I've configured this properly, but it doesn't seem to be working. If anyone can help me troubleshoot this I would greatly appreciate it.
I have a new Time Capsule acting as my main wireless base station; it has a manually-configured static IP address, is plugged into my Verizon FIOS router, and is set to distribute IP addresses over wireless using DHCP. I have it set to run a 5 GHz network in addition to the regular 2.4 GHz network. I have an older AirPort Express that I want to use to extend the range of the 2.4 GHz network (the Express can only do 802.11b/g, not 802.11n), in part because we have some older devices in the house that I don't want to slow down the 802.11n network, and in part because the 802.11b/g signal doesn't reach all parts of the house very strongly. So I told the Time Capsule to make its network extendable, told the AirPort Express to participate in a WDS network as a WDS relay, and entered the MAC address of the Time Capsule's 2.4GHz network as the WDS main. Result: flashing amber light on the AirPort Express, which no longer shows up in the AirPort Utility; I had to do a hard reset in order to get the Express back (and then it had to be reconfigured again, of course). At the moment I have it just joining my wireless network, and that works -- green light -- but of course doesn't allow the Express to extend the range of the wireless network.
What am I doing wrong here?

Before there was dual band, we always told users that if they used WDS, the entire network would revert to "g", even if the Time Capsule, AirPort Express, etc were capable of "n" performance.
Your findings seem to confirm that this happens with a dual band as well.
I think it's well worth it to get the AirPort Express 802.11n. Then you can reconfigure the Time Capsule back to "Create a wireless network" and check the box to "Allow this network to be extended"
The Express"n" would then be configured to "Extend a wireless network". I use this setup and would highly recommend it. There may be a slight bandwidth loss due to overhead, but the performance is light years ahead of WDS.
If you are using the same network name for both bands on the Time Capsule, then I believe by default the Express will extend the 2.4 GHz "n", "g" and "b" band. This makes sense for most users since 5 GHz signals do not travel well over distance or penetrate obstructions well.
IF...you want to extend the 5 GHz band, the only way that I know how to do this is click Wireless Network Options on the wireless setup page for the Time Capsule and enable the option to assign a different name for the 5 GHz network.
Then you will have to configure the Express to extend this specific 5 GHz network. I never had much luck extending 5 GHz, and I wanted my iPhone to be able to use the network across the house, so I went with the simpler one network name for both bands and extended the 2.4 GHz network.
If you have a "g" device joining the extended network, it may tend to slow the "n" devices down slightly...when the "g" device is active, but it won't drag everything down to "g" levels. When the "g" device is not active, "n" devices will run at "n" speeds.
BTW, the ethernet port on the AirPort Express is active when you configure it to "extend a wireless network". This can come in handy for hooking up DVD players, etc that need an internet connection for firmware updates and extra features.
Follow up....I tried a very quick reconfiguration of my dual band AirPort Extreme (same router that the Time Capsule users) and AirPort Express using the WDS arrangement and everything did indeed drop way down in speed and performance.
Post back if you have questions. Happy to help.
Message was edited by: Bob Timmons

Hi I've recenty purchased a new imac time capsule airport express. I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?

Hi I've recenty purchased a new imac + time capsule + airport express.
I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?
Michael

detailed in terms of what focus?
here is a video guide about using the airport utility
http://www.youtube.com/watch?v=65Jv6m43eIE

Time Capsule Airport Express Best Configuration for Backups & Internet

I have Time Capsule as a main router connected to a cable modem downstairs, plus Airport Express (new with firmware upgrade 7.3.2) in my office upstairs to extend the network. Two things keep happening:
1. Backups work sometimes and sometimes not although I am connected to my WPS secured network
2. Frequently lose internet connection, as in every hour or so; alternately nice and fast, then none at all. Most of the time I have a SNR of about 37.
Is there some optimal configuration settings for TC and Airport Express that could reduce these occurrences? Is there, for example, something I need to do with the Access settings on one or both?
Thanks for any help.

Since it still looks like you will need to support 802.11g wireless clients (your iPhone), the best radio mode for the Time Capsule (TC) will be the default "802.11n (b/g compatible." Since this is running in the 2.4 GHz radio band, you can use iStumbler (or similar utility) to determine if there are other Wi-Fis in the area; find out what channels they are operating on; and try changing channels on your wireless network to see if this will help provide the best SNR.
1. Backups work sometimes and sometimes not although I am connected to my WPS secured network
Are you actually using a WPS, or did you mean WPA?
2. Frequently lose internet connection, as in every hour or so; alternately nice and fast, then none at all. Most of the time I have a SNR of about 37.
If directly connected to the TC by Ethernet do you still lose the Internet connection periodically? If so, how about when connected directly to the cable modem?

Time Capsule + Airport Express N How to extend

Have been trying to extend my wireless network but have been unsussessful. Here is my setup. Cable modem connected to Time Capsule and Express N connected via ethernet cable. I try to do it with the setup but it will eventually revert to picking up the cable modem IP address 169.etc so I think I might need to manually input the addresses. Will some walk me through this including the ip addresses I should use? The Time capsule is NOT in bridge mode and works perfectly with the internet and other expresses used only for music streaming. Thanks

Mitchell, welcome to the discussions!
You may find it easier to use Manual Setup in AirPort Utility for the device.
The key setting would be under the Internet icon. Look at the bottom of the pane for Connection Sharing, this would be set to Off (Bridge Mode). Under the Wireless tab, you would set the Wireless Mode for "extend a wireless network" and make sure there is a check mark next to "allow wireless clients"
On the setup of the Time Capsule in AirPort Utility - Manual Setup - Wireless tab, make sure there is a check mark next to "allow the network to be extended"
If you have a good wireless signal in the area where the Express will be located, you also might want to try extending your network without using the ethernet cable. Normally, a good starting point for positioning the Express is at a point that is approximately half the distance from the Time Capsule and the area that you want to cover with the Express.
You may also need to reset your cable modem by powering it down for 10-15 minutes and then restarting.
Please post back on your progress.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Bt Home Hub (fibre optic) can it work with my Time Capsule & Airport Express?

I have just moved house after having no problems for years with my virgin cable I have now had to switch to Bt because cable is not available at my new address therefore I would like first and foremost to have my Time Capsule available to use as a hard drive, I am not too bothered about wi-fi as that comes from the bt hub, only thing is I am at a loss how the Time Capsule hard drive is not working. Also is there anyway the Bt Hub can connect/link to Time Capsule or even Airport Express.

Your TC can be used bridged to the BTHub.. and plugged in by Ethernet.
It is best to still use the TC wireless for the express to extend and you will find access easier.
Always best to start with a factory reset when you do this.. The TC remembers too much from its last configuration.

Need help with new Time Capsule/Airport express setup!

I just hooked up a 500g time capsule to replace an airport extreme, and now my airport utility on my MacbookPro Retina no longer recognizes the airport expresses I had on my network for airplay purposes. Can anyone help with this issue?

Instead of a switch you need a wireless router, because your modem will only assign one public ip address to the switch and that ip address will be forwarded to any one computer at a given time...You should replace the switch with a wireless router and it should resolve your concern...

How best to use TWO Time Capsules, Airport Express and Apple TV?

Hello
I have the following Apple equipment and am wondering how best to plug it all together. At the moment I am not using some items at all because I do not know how to best use!
1. MacBook Pro (2012 model) 'Mac1'
2. MacBook Pro (2009 model) 'Mac2'
3. MacBook Air (2011 model) 'Mac3'
4. Time Capsule 1TB (model A1355) 'TC1'
5. (another!) Time Capsule 1TB (model A1355) 'TC2'
6. Airport Express (2008 model)
7. Apple TV (2013 model)
8. LaCie 1TB USB Hard Drive
9. Apple iPhone
10. Sonos system
CURRENTLY
TC1 is plugged into the Virgin Media modem to provide a WiFi network called 'Amer's Apple Network' around the house. The Virgin Media wifi has been switched off to reduce interference.
TC2 is not being used. The Airport Express is plugged in upstairs (or sometimes near garden) to extend the 'Amer's Apple Network' and this seems to work fine.
Apple TV is plugged into main TV and is plugged into 'Amer's Apple Network' directly using Ethernet to TC1 but often runs slowly and does not work if Mac1 is not awake (or iTunes is not running on Mac1).
LaCie is plugged directly into TC1 and currently has a old copy of my iTunes library stored on it which my Sonos system access. However, there seems to be a problem in that iTunes randomly uses that LaCie library and/or local Mac library. Often we get a pop up message on Mac1 saying "Library cannot be found" and we have to manually navigate to the LaCie drive (via the TC1 folder) to open iTunes. Also connecting iPhone to Mac1 seems to work very slowly as it appears to be trying to back up to LaCie drive.
QUESTION
What would be the best, most efficient way of using all (or if some is redundant equipement then which), to set up the following:
1. A shared home network which enables all three computers (and any future Macs and/or iPads etc) to access one master shared iTunes library, which is the one that is updated with any new music, films etc added via any of those machines
2. A shared home network that enables a shared files folder but also allows each user to keep their own personal hard drive (eg locally on whichever machine they are using).
3. A fast (as possible) iTunes back up process when connecting iPhone to computer
4. Usage of both TC1 and TC2 (and Airport Express) to extend network around the house (several weak spots exist) and also to maximise storage using the 1TB of each TC1 and TC2.
5. Would it then also be possible to attach the LaCie USB drive for an additional 1TB storage? If so how and would it be very slow? From existing usage it appears to be very slow when used as a regular access drive, so perhaps better as a 'slow' drive that is just occassionaly used for back up and nothing else
Main question is (to the networking experts!), how would you personally set up all above to give best wifi coverage, fastest back ups, access to Sonos for iTune library, access to Apple TV, and shared folders etc etc. I basically seem to have lots of kit (albeit some quite old) and nothing seems to be working together particularly well.
Happy also to ditch any bottlenecks in the above equipment list (eg LaCie USB drive?) and add something which would better bring together the other components?
Any thoughts much appreciated!
Best
Amer

So ... FINALLY ... I found some time to implement this!
Steps taken and results:
1. Moved my entire music library to Mac1. Used the opportunity to also share my other Mac2 onto HomeShare and copy across any music files from Mac2 onto Mac1 that were not already there.
Result: Mac1 now holds my whole music library locally. Works incredibly fast whenever playing a track, adding a new track or updating info on existing track. Good!
2. LaPastenague's instructions for bridging TC1 with TC2 worked a dream. Only thing is they are basically next to each other as I don't have the energy (or cabling expertise) to install (cleanly) long runs of ethernet cable.
Result: Got a clear Wifi signal, not sure if any faster than before but I assume two TCs next to each other both sending out the same network signal can't be any worse than one. Main thing is that I have an extra 1Tb network drive (i.e. TC2) connected to TC1 which I can access from all my Macs now.
3. Copied the entire Mac1 Music library over to TC2 drive into the Data folder. This happened relatively quickly (I think!) ... but would welcome any comments on whether slower than expected, to highlight if I might be able to improve the connection. 12,000 songs in 2 hours, with Mac1 sending the files to TC2 wirelessly. I know I could probably have connected Mac1 to TC2 by ethernet cable to speed up, but I had run out of Ethernet cables by now!
Result: All my music (as of today anyway) now on Mac1 AND on TC2 in normal readable format (i.e. by Sonos and as a simple back-up that can just be carried around and copied anywhere in the event of loss of Mac1 drive
4. Set up TC2 Music Library in Data folder to be the networked music folder for Sonos using "\\TC2\Data" (ps. why doesn't Sonos allow a simple click and select option for choosing drive and instead force us to go back to the 80s and type in drive path which isn't always clear, especially on a Mac!)
Result: Sonos can access all my music (as of today anyway) on TC2 and no need for Mac1 or any other Mac to be open.
BUT: As you may have guessed, the issue with the above set up is that as soon as I buy a new song, it will get added to my Mac1 quickly and smoothly ... but the area where I really use my music (i.e. Sonos via TC2) will have the older music library.
QUESTION: Is there any way in which I can adjust the above set up, so that whenever I add new music to my Mac1 it also copies across to TC2? Don't mind if this is done slowly and later (eg in middle of night) but of course don't want to have to copy across manually each time. Would prefer it to just update newly added tracks regularly.

Time Capsule & Airport Express Extended Network loses connection!

OK, so I am an Apple virgin of 2 months experience, after many many years with Windows based PCs, so please be patient and gentle with me. Sorry about the long explanation.....
My set-up comprises of a Time Capsule, which is connected to the Internet via a NetGear ASDL modem. Both pieces of equipment are situated in my wife's office on the first floor of our house. My office is on the ground floor, where I have a 27" iMac and an Airport Express which is connected to a printer via the USB port. The Airport Express is sited about 10 feet from the iMac.
All software and firmware are lastest versions - TC v7.5, AX v7.4.2 & Airport Utility v5.5.
For the past 2 months, I have only been using the AX to print wirelessly and the set-up has worked faultlessly.
Earlier this week, I decided change the configuration to extend the network to allow me to use my laptop & iPhone in areas of the ground floor where I had no signal. I followed the online instructions and first changed the TC to check the box to 'allow this network to be extended', after updating the configuration successfully I moved to the AX. Here I changed the wireless mode to 'Extend a wireless network', selected the network name and checked the 'Allow wireless clients' box. This also updated successfully.
Everything ran correctly and the range of the network was greatly increased.......great, job done...not!
After about 3 hours the iMac lost the connection and the TC disappeared from the Airport Utility pane and refused to reappear. I checked but also couldn't connect or see any network on the laptop or iPhone, so have dismissed a fault with the iMac. I finally got things back up after doing a power reset of the TC, but after a few hours same problem occurred, and occurred and occurred. By clicking the Airport Utility icon on the top right of the screen and following the prompts from 'no Internet connection', I can at least get things up and working without a power reset of the TC, but the connection still drops after 2-5 hours each time.
My first call to Apple Support led to a full reset and re-config of both the TC and AX, setting the extended network up as I had done originally. The only difference was an iMac reset (alt/cmd P&R on power up) and changing the 2.4Ghz channel from 1 to 11. This had no affect and the connection drop-out problem continued.
My second call to Apple Support led to me being passed to a Level 2 Techie, who first suggested that I tried disabling the Guest Network - tried it, and it made no difference. I was then told to try a WDS network, which whilst not losing connection, is slower and has less range than the original extended network and frankly sounds a cop-out.
Has anyone had a similar problem, anyone solved the problems, can anyone offer any help or advice please.. I'd appreciate any input....thanks.

Similar problem here. Cable Modem (Moto SB6120)->AEBS (802.11n dual-band)>AX (802.11n) for wireless connection to MacBook Pro running Mac OS X 10.6.2. AEBS configured as dual-band: 801.11a/n at 5GHZ and 801.11b/g/n at 2.4 GHZ. AX configured to wirelessly extend the AEBS 5GHz 802.11a/n network. I am able to run on the extended 5GHz network (via AX) for varying lengths of time, until the internet connection dies. When this occurs, I am able to switch over to the 2.4GHz network to get back online. Solution up until now has been to unplug the AX, then plug it back in. After the AX restarts, I am able to hop back onto its 5GHz signal and get to the internet. However, the internet connection on this band will drop again after some time.
I was on the phone with Apple Support twice in the past week to get this resolved, but no joy. Senior Advisor seemed to think that my AX was working properly, and that that the problem could be with my AEBS -- perhaps the 5GHz antenna might be bad in my AEBS? Seems odd to me, since both my AEBS and AX are less than 2 months old...
I just read the post from LocoDoc and decided to see if I could replicate the problem. Sure enough, when I am connected to the internet via my AX extended 5GHz network signal and a Time Machine backup starts, the internet connection quits. Only recourse is to restart the AX. Note that I do not experience this problem with Time Machine while connected wirelessly straight to the AEBS 5GHz signal. Only when I am connected to the "extended" signal via the AX.

Belkin Time Capsule Airport Express PLC

I allready have a modem router Belkin, a Time Capsule and an Airport Express. The problem i have is that i have a many meters from the Belking and Time Capsule to the saloon (Airport Express). Can i buy an PLC and use it with my network connection???

... Can i buy an PLC and use it with my network connection???
Yes, but be aware that some work, and some do not.
It is not a question of using your Belkin router with a Time Capsule and Extreme or not. The problem is that it is impossible to know whether PLC will work in any particular installation, because building wiring practices can vary so much. Its maximum propagation distance is also unpredictable, for the same reason.
All you can do is try it.

Best use Time Capsule & Airport Express together?

I've used the Express for several years and really enjoy using the ouput to play my iTunes wirelessly thru my stereo speakers. Then we moved, but my wife moved ahead of me and took the Express. I then bought a Time Capsule which doesn't have audio outs. I noticed that when I set it up it used the same name for the wireless network as my old Express. Now I've moved and joined my wife, and for the 1st time have both devices together. What is the most effective way to configue them? How do I maintain use of the Express for the iTunes wireless playing? Do I need to rename the network?

Hi Brian,
Set up your TC to be the Main network provider. It will work the best as it has the more powerful antennas. Then add the Express to extend the network of the TC. The Express will still play all music wireless and print wireless to printers attached. If you have both a APE g and n as i do its no problem at all couse the TC has got dual band.
For your last question, its best to reset the APE prior of doing the new settings. Just press the small reset button on the bottom of the device by pressing it for 10sec with a pen or pin (while attached to power). the light will start blinking very fast after 10sec. Then just plug out power and back in and your mac will see it popup in the airport utility.
Setup:
*First attach all cables to the TC and power it up, leave the APE off power.
*setup the TC as you pleaseand check if its works as you wish
*plug in the APE, airport utility will see it and ask you what to so
*set the APE to extend your existing network (that of the TC)
*APE will reboot and your off :-)

Time Capsule - Airport Express

Hi - This is not a problem yet!! Just looking for advice or a cautionary tale of what may go wrong
Basically, have iMac Time Capsule acts as wireless device, I have it connected to iMac and ASDL modem via ethernet cable(s) everything works well connect to various laptops/ipod touch wirelessly. Considering purchase of airport express that i could connect to my stereo system (downstairs) and 'stream' my iTunes -Is this going to cause me any problems? I did visit my local Apple outlet armed with a host of questions but unfortunately I seemed to know more than the young lad I spoke with!!
Any advice help or asistance would be appreciated!

The only issue I can think of at this point is the strength of the Time Capsule's wireless network as it will be "seen" by the AirPort Express that you are trying to join with it. If the signal strength is poor, then you may experience audio dropouts when attempting to stream to it. The primary reason for poor signal performance is Wi-Fi interference. This can be attributed to building construction material, other Wi-Fis operating nearby, or things like portable phones or microwave ovens that operate in the same radio band.

Time Capsule + Airport Express = SLOW!

ok experts, here is the problem: I am using a Time Capsule as my base station and speakeasy.net tests show its getting 8mbps down and 2mbps up. When i extend my wireless network using an Airport Express the speed test results plummet to .5 mbps down and .3mbps up. when I'm in my bedroom where the airport express is, things are insanely slow. When I am in my office close to the Time Capsule, things are fast.
the Time Capsule is configured as 802.11n (802.11b/g compatible), Channell 11, and the wireless Mode is: Participate in a WDS network, with WPA 2 Personal security.
It seems to me the problem lies with the airport express. Any wonderful suggestions and sage advice?
thank you very much in advance. larry

"Extend a wireless network" and "participate in a WDS" are two completely different methods of expanding a wireless network arrangement.
Ideally, you will use the "extend" feature because this places much less of a bandwidth penalty on the wireless network compared to WDS. But, to use the "extend" setup, both of the Apple devices must be "n" capable. We know that the Time Capsule is an "n" capable device, but your Express may or may not be depending on what version you have.
Can you check the fine print on the side of your AirPort Express to see which model number you have? It will likely either be an A1084 or A1264. Please post on your findings.

Time Capsule/AirPort Express problem with DHCP server

Similar Messages

Maybe you are looking for