Time Capsule and AirPort Utility Version 5.3

I just got my time capsule and it says to use Airport Utility Version 5.3. I installed the time capsule using the enclosed CD and also did a software update. but I am still at 5.2.2. How do I get version 5.3? Why was it not included with the Time Capsule?

Yes I installed it - but it still says 5.2.2 Even though the installer talks about 5.3 and says its easy to set up, if I look at "about airport utility" after the installation it still says 5.2.2. Any idea?
Do you need to reboot?

Similar Messages

  • New to Time Capsule and Airport Utility App not current...

    I just received a Time Capsule for Christmas with the main purpose being to back up photos from my Mac and iPhone. When trying to install the Time Capsule I get this message:
    "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility."
    My Airport Utility app is version is 5.6.1
    I've looked for a more recent update but it doesn't appear there is one.
    Is there a more recent update? Do I need it to proceed?

    You must use a Mac with Lion at least, and the latest v6 airport utility available for it.. You cannot use Snow Leopard. You cannot use windows.
    The alternative is to use iOS version of the utility which you can download to iphone ipad.

  • Time Capsule and Airport Utility Not working?

    I just got Time Capsule, I tried to hook it up at my office by attaching it to the internet. I went through the steps to have it show up as one of my wireless devices. Even got the green light. However I must have set it up wrong because now airport utility cannot find the apple network and continually asks to RESCAN - the utility has dimmed out all my other options so all it does is rescan but can't find network etc etc. I would just like to reset everything and start from scratch but it won't let me. I"ve deleted my Airport Utility application and reinstalled but it still won't work. Any suggestions anyone.
    Rick

    Hi Rick,
    Press the recessed reset button on the back of the Time Capsule for 5 seconds or so. This will reset all settings and let you find it in AirPort Utility. Also, you need to provide a bit more information about your current/intended network setup in order for us to provide any useful advice (ie, how will you connect to the Internet, what purpose your TC will serve such as Router, wireless device, etc.) And just FYI, deleting and reinstalling AirPort Utility is kind of futile as the reason it wasn't detecting your Time Capsule was because of the settings on the Time Capsule itself, but with the reset it should be able to detect it again.
    Also, here is a useful Apple document that will give you more information about setting up networks:
    http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

    i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
    . .....but i couldn't find the time capsule from airport utility..... why?

    Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
    You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
    http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
    See page 12.

  • Apple TV Inference with Time Capsule and Airport express?

    I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
    The TC and AE are configured to join my existing network....and have happy sat there for a few years.
    I would really welcome any ideas.
    Thanks
    R

    Welcome to the discussions!
    It sounds like you have the basic configuration covered correctly.
    You might want to check some settings on the TC:
    Wireless Mode would be create a wireless network
    "Allow this network to be extended" should be checked
    The AX should be set to "extend a wireless network"
    The "allow wireless clients" box should be checked
    In this configuration, the ethernet port on the AX is active so things should work.
    A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
    If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
    Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
    If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
    Please post back with your results.

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • Question about Time Capsule and Airport Express co-existence

    I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode.  It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN.  The network mode in the Airport Express is set to "off".  Historically, the Airport Express has worked fine in this wired lan mode.  However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today.  After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that.  The correct / desired diagram would be the Time Capsule and Airport express as peers.  I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express.  After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

    The automatic setup in the airport utility has changed something.
    Is the line down to the TC from the express dotted.. in other words is wireless??
    Funny stuff happens.
    Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
    Make sure wireless is set to off in the express.
    Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
    So for example the bridge on the network tab.
    The summary page can also be a help.
    There is a half summary page when you click the item in the airport utility.
    There is also a fully summary page, when you hold option key and double click the TC icon for example.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • Extremely long log on time using Time Capsule and Airport

    i'm really confused as to why when I start up my macbook, connecting wirelessly via time capsule and airport that it takes an extremely long time to log in and the internet connection seems unusually slow. is there a setting that's off? when i log on at work to a different router and wireless connection it starts up right away. any advice appreciated.

    1. no idea.
    2. I get the same issue. Set the brightness at a certain low level - and most often when i performa a full restart of the computer - the brightness is usually at full blast.... I've had this happen for about 5 months now and have never bothered to call in about it - if it hasn't been fixed yet - I'll just deal with it as it only takes a second to correct... but yes - annoying....
    3. Same as you - and this is the funny thing...... Mine used to start pulsing immediately when the lid was closed. IT changed for me in the last 2 months or so. That - and also - when performing a shutdown of the computer - it just get a grey sinning circle on the middle of the screen for about 10 or 15 seconds..... very similar to the wait for the pulsing light....
    I reinstall OSX every month or so for various testing purposes - and I usually just put all the updates on immediately. next time - i will run the vanilla OSX that came with my re-install cd and check out condition 3 to see if it is an update that has caused that delay.
    So - you're not alone/

  • Today Apple retail unit sold me Airport Time Capsule. Now trying to install on my Mac which runs OSX10.6.8. Seems I should have newer OSX and Airport Utility version. What can I do please?

    Today Apple retail unit/shop in sold me Airport Time Capsule. Now trying to install on my 21 inch iMac which runs OSX10.6.8. Seems I should have newer OSX and also newer Airport Utility version (mine is 5.6.1). What can I do, please? So much looking forward to using Time Capsule. It is not at all readable on box. Now with a magnified glass I can just about make out the installation requirements printed in tiny print at the bottom/base of the box! I have tried software update etc etc and to download Airport Utility update from Apple website. This was unsuccessful because of OSX, I gathered. Appreciate any similar experience and how it was resolved. Thank you. Tr

    You need OS X 10.7.5 or later. Most likely you can upgrade OS X on your iMac. You already have 10.6.8 and access to the App Store. If your computer qualifies to run Mavericks, then that is what you would upgrade to, otherwise, you would upgrade to Lion.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Hi I am trying to connect a new mac to an existing time capsule but Airport Utility is just not picking it up. What am I missing?

    I have tried to connect the new mac to an existing time capsule both directly through ethernet and through wifi. Both times I get Internet connection OK but Airport Utility is stuck searching for the base station. I have two existing macs which are connected fine and have both been backing up quite happily. The first two macs are the same user (me) and the new one is for a different user in the house. All the macs are running Mavericks.
    I have tried rebooting the time capsule and the new mac - didn't help.
    Any information as to what I can try would be most welcome.
    Many thanks

    Hi All
    I have solved my problem! It was the old chestnut the firewall issue. We have McAfee firewalls on our machines and the wifi network was set up as a public rather than a home network. I changed it to Home or Work and het presto the time capsule appeared. I didn't have this problem with the other machines at all.
    I hope this helps someone!!

  • How can I get my time capsule and airport express (as a network extension) working properly together?

    Hi,
    I bought a time capsule a while back and connected it to my modem, and it seems to be backing up my hard drives but I can't tell if I'm getting my wireless signal from my time capsule or from the modem itself, which used to before I bought the time capsule.
    It's bugging me because I'm trying to get my airport express to work as an extension to my network, and airport utility half the time can't pick up the express. I heard that it will only work of the time capsule is working as the base station,and I'm not 100% sure this is the case.
    Also, how far can the airport express be from my time capsule for it to be picked up? I tried resetting it which helped to start with, but when I was setting it up to extend my network it just told me that there was an error and to try again, which I did with the same result.
    Any advice would be much appreciated!
    Cheers

    Always do setups with ethernet.. setting up wireless via wireless is like cutting off the branch you are sitting on.
    You do not need the TC in the network to do the setup.
    Plug it by itself into the computer. Same with AE. But do each separately.
    Give the TC a different wireless name.. like TC.. then you will know the TC wireless is separate and different to the main modem router. Simply allow it to be extended.
    Plug it back into the main modem.
    Now do the AE.. set it to extend the wireless of the TC.
    When you do this check the signal level. The airport utility v5 has a full diagnostic of wireless client levels.. do not use v6 utility.. it is useless. The AE is placed somewhere in between the TC and the clients you want to connect.. it has to get decent signal itself to extend wireless. And there is no way we can tell you how far apart.. pick the half way point.. around about and suck and see. If it doesn't work move closer to the TC.
    Count the walls the signal is going through.. about 15% signal loss for each one.. if angle is acute 20%.. floors are worse.. they might be 20-25%..

  • WPA security with both time capsule and airport express not working together

    I want to set WPA security on my time capsule so that my teenager can not access wireless with out permission but when I add a security key my airport express disappears from list.
    I have tried setting a password then the time capsule restarts and when it does the aiport express is gone from list and can not be found when rescanned.
    Do I need to set time capsule and then reset airport express by pluggin it directly into desktop and resetting its software?
    Thanks

    I would suggest, reconnecting the Express to the TC again. Use the AirPort Utility to make ALL configuration changes including the network extending settings. Then restart both base stations and check that the settings are still good. Then disconnect the Express and give it a few minutes to initialize. It should connect. If not, then the issue may be either the distance or obstructions (like walls, ceilings, floors, etc.) that is preventing the Express from getting a signal from the TC that is adequate enough to extend.

Maybe you are looking for