Time Capsule and all in one printer HP Photosmart C4280

Hello,
I recently got me a Macbook pro finally. Its awesome!! I love it. Im looking to get Time Capsule or something like that. I want to be able to hook my printer up to something and print from other room. I want to print wirelessly...the scanning and copying feature really doesnt bother me not to have.
Any know if the Time Capsule works with the HP Photosmart C4280. I got this printer with my computer. Its a multi function printer.
The backup feature is neat, but its not as important to me...Im sure it will be if I never lose my hard drive.
Anyone have any advice? Anyone have the HP Photosmart C4280 printer running on time capsule or any other wireless device in order to print wirelessly? Thanks
Amy

Hi Amy,
It should work just fine as a printer. I have a similar setup, and printing works, but I can't scan or fax across the network.
I'd probably recommend the Time Capsule over an Airport Extreme- your MBP can use it for Time Machine backups- untethered!
I've got one on order for our Mac notebooks.
Oh yeah: we have an HP Printer, too. Works fine.
If you price out 500GB and 1TB drives and wireless N routers, I think you'll see that Time Capsule is a pretty good deal.
Enjoy your new Mac!
Message was edited by: Seanessy

Similar Messages

  • Time Capsule and all in one printer HP Photosmart C5580

    How can I get the HP Photosmart C5580 working fine with time capsule?
    It prints but do not anything else, like scanning, etc...
    Thanks in advance,
    AZ

    Bob,
    I am having a similar problem as this person. I have a HP Photosmart 3210. I figured out that I could not use the scanner with the USB on the Time Capsule so I connected the printer via the ethernet port on the Time Capsule to make it a networking printer. This allowed me to see the printer and scanner, but I still can not get the scanner to work. I have all the software updates for Mac and HP. When I go to scan the software says "Trying to Open session with device" and after 30 seconds it will say "Failed to open session with device". I know the software works because if I connect the printer directly into my compute with USB everything is good. Also, if I go into the Embedded Web Server (while printer is connected to Time Capsule with Ethernet) of the printer I can perform a Preview and I will see the scan of the item in the scanner, but I still can not scan. Any ideas? I have to talked to both HP and Apple without any ideas.
    Thanks

  • I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    You just need a powered hub.. if you already use one then fine.
    Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
    Pick whatever size suits.. nowadays 2TB are most economical.
    WD, Seagate have goobled up all the minor players.. so pick one.
    Whatever suits your budget and asthetics.
    NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

  • I have a time capsule and airport express one floor lower, the signal keeps dropping. Would an airport extreme give me a longer range for wifi?

    I have several computers. My equipment is upstairs in a house, apple time capsule and downstairs airport express. Lately the downstairs computer keeps disconnecting from the internet. Would replacing the airport express with and airport extreme give me a greater range for my wifi connections?

    Yes.  Question is... would the difference be enough.
    The extreme has a bigger & more powerful antena array. But if that alone still doesn't suffice, you also have the option to use the express to EXTEND from the Extreme.

  • Time Capsule and Lexmark S605 Wireless Printing

    I have been a happy Mac user for years now and have convinced nearly all of my friends to make the switch. However, I recently a new MacBookPro which was bundled with a Lexmark S605 printer last week and have had nothing but issues...complete opposite of my previous experiences with Apple.
    I cannot get this Lexmark printer set up to work over the Wifi connection to my time capsule. Have just updated the time capsule firmware and I still receive the "unable to connect to router" error on the printer (although it does recognize the network in the network list on the printer, it just will not connect). The wifi indicator on the printer is blinking in orange.
    Has anyone else experienced this issue? Any help in getting this printer to work on my Wifi network would be much appreciated.
    Richard

    Have you setup MAC Address access restrictions on your time capsule? If yes your lexmark mac-address can be found opening your printer.
    two recommendations:
    1) Although the s605 is wireless-n capable it works only on the 2.4 Ghz Band
    2) Don't install the Apple Lexmark Update (1 and 2) if you want to use it over wifi. Just install drivers and utilities from lexmark site.
    regards

  • Time Capsule and HP LaserJet P2015d Printer

    I have recently set up a new Time Capsule as my main base station and it is working great as a Wireless router and Time Machine Backups. However, I have just plugged my HP LaserJet 2015d printer into the USB port and it is not being recognized. It doesn't show up anywhere, either in the printer settings box or the printers section of the Manual Setup in Airport Utility.
    Can anyone shed light on what I need to do to get the printer to be recognized or point me to a list of compatible printers? I have been through the various troublshooting documents I can find and so far no luck.
    Thanks,
    Drew
    Message was edited by: Drew Fulton

    Hello Drew Fulton. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help:
    o Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if the printer you are interested in is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • If I get an airport Extreme/time capsule and plug a USB printer into it does it become an airplay printer so I can print from my I devices

    I wanna get a new airport express or time capsule, I'm leanin towards the time capsule but in wanna know If I plug my USB printer into it if it becomes an AirPlay printer so I can print from my iPad

    Nope.  It's got to be a real AirPrint printer.
    However, you may be able to use an app and print the way you described.  Check out printopia.

  • Hp 8600 All in one printer problem with scanning through wired network its very slow!

    Hi
        i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB.  i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning? 

    Welcome to the community @Larrypat 
    I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
    Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
    Also let me know which model from the C7200 series you have:
    HP Photosmart C7250 All-in-One Printer
     HP Photosmart C7280 All-in-One Printer
     HP Photosmart C7288 All-in-One Printer
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
    Let me know how it goes and the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP C7200 All-in-One printer will not print through the Wifi network

    I have used the HP printing and scanning Doctor but none of the proposed solutions have solved the problem. The blue light for wirelwss 802.11g service is on and connected to the same Wifi address as my laptop is using now. My Dell laptop is running Windows 7 and the printer works if I use the USB connection instead of the Wifi.  Any suggestions?
    Larrypat
    This question was solved.
    View Solution.

    Welcome to the community @Larrypat 
    I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
    Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
    Also let me know which model from the C7200 series you have:
    HP Photosmart C7250 All-in-One Printer
     HP Photosmart C7280 All-in-One Printer
     HP Photosmart C7288 All-in-One Printer
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
    Let me know how it goes and the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Time Capsule 7.5.2 + usb printer Epson R300 = BROKEN

    Hi everyone,
    I could really use your input.
    I have a 1Tb Time Capsule and an Epson R300 printer.
    The printer is connected to the Time Capsule through USB and before the 7.5.2 update they worked perfectly (that is: Time Capsule recognized the printer, I could print wireless, etc.).
    After the update, Time Capsule says it has a USB hard drive connected for which it cannot supply enough voltage (and there is no hard drive connected, only the printer).
    Also, the printer does not longer appear in the Airport Utility tab for PRINTERS.
    I already downloaded the latest drivers from Epson with no luck.
    Certainly the problem is with 7.5.2.
    Has anyone else run into this?
    Do you have any suggested work-around?
    Thanks.

    You always have the option of rolling back to the previous version of firmware on your device.
    Open AirPort Utility - click Manual Setup
    Click the AirPort Utility menu at the upper left of the screen next to the Apple icon. Hold down the option key on your Mac while you click the Check for Updates and list of firmware versions will appear. Select the previous version that you were using and re-install.

  • Wireless printing with time capsule 1tb and new wireless all in one printer

    I am having problems with printing wirelessly from my time capsule 1tb. I currently have a hp 5510v office all in one printer and drivers can not be found to support printing wirelessly however it can print via usb. What I need is help in picking out a new all in one printer that can print wirelessly from time capsule 1tb. Please help

    Hi,
    my hp photosmart C6180 all in one works flawlessly with it plugged in to my time capsule all functions.
    I used to have it set up using it wirelessly from the printer however for some reason after a update (i think) it stopped working & would not print so had to plug in to time capsule.
    Dave

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

    Okay folks, I need your help out there.
    So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
    I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
    Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
    I know it seems confusing, but thats the best i can describe it.
    tthanks all

    Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
    So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
    You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
    OR
    Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
    I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
    This is a good basic post for older xbox.
    https://discussions.apple.com/thread/5385065?tstart=0

  • How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

    I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu.  However on the test page for the fax the time and date are showing Jan-00-00 00:00AM.  I do not know how to change the date and time.  Please help.  Thanks.
    This question was solved.
    View Solution.

    Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.

    I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.  I can manually send and receive faxes but I can not do it through the computer. 

    Try deleting the printer, deleting the job queue and reinstalling the printer again.

Maybe you are looking for

  • Convert char to p-type

    Hi i have a file with some data i need to load. I have a field which is 13-position length field, with a comma and two decimals. When i try to move it to betgr field of t558a table i got a dump. How can i convert this 13 position char field to betgr

  • Portal 2 crashes since upgrade to ML

    I realise this isn't a gaming forum but I wonder if anyone can help. Since upgrading to ML (via a clean install) and installing Portal 2 via Steam, the game crashes when loading levels.  The game's main menu loads OK but crashes upon loading levels.

  • Why my apps store dont have talkbox ?

    Why my Ipad2 dont have the talkbox apps in the apps store.. Even viber also dont have... why??

  • Auto allocation or finished material against sales order for MTO

    Dear All By which T-code can we allocate the finish item in sales order from stock in unrestricted use. We follow MTO strategy for our finish material What is the best practise for such scenario. Thanks

  • Adding Buttons

    Hi, I've got a JPanel including a few JButtons in a JApplet. All JButtons have an ActionListener (JButton.addActionListener(this);). There is an other JButton. By clicking on this Buttons an new Jbutton should be added to the JPanel and the JPanel sh