Time Capsule and extend network

Hello,
my connection between Time Capsule and router is nearly working, but not perfect. Router an Time Capsule are connect via WLAN. Setup an possition of the router can not be changed. The router is far away from my laptop , so there is a very poor connection. Thats why I wanted to extend the network. Extending with WDS is not possible because of the router configuration. I have choosen " extend network" in the Time Capsule setup, picked the network from the list and entered the key ( 128 bit WEP ). Time Capsule tells me it could not extend the network, although I can access the Time Capsule and have a working internet connection. I am accessing the Time Casule via Router and all wireless, so the router an Time Capsule have to be connected, somehow. Can someone help me to get this setup really working? Or is it possible to access the router via Time Capsule? Because the Time Capsule is close to my laptop an I would have ab better connection like this.

This is not the actual problem. The connection is working, but very slow, because the router ( with dd-wrt software on it ) is too far away. So i wanted the Time Capsule to support the network. Connecting router and Time Capsule with WDS is not possible, because the setup of the router hast to be NAT. There is a another option in the Time Capsule setup to extend a network without WDS, which I wanted to use. The Time Capsule connect to this network via WLAN ( otherwise I could not access it ) but it does not extend the existing network. This is problem with Time Capsule an router. I wanted to know what I have to change in setting so that the Time Capsule extends the network. Is there somthing special with password or IP adress ( at the moment it is set to DHCP ), .... ?

Similar Messages

SOLUTION TO Time Capsule and extend wireless network using AEBS, Printers..

Hello GUYS
I find the solution: at least I have extended wireless using TC and old AEBS.
: well everybody have same problems to initialize second AEBS, and set it up.
OK follow this steps:
put next to each other TC (time capsule) and AEBS (airport extreme) -> switch AEBS off
If you followed installation TC correctly it should work without any problem.
SETING UP TC PART 1
pres in finder Command + Shift + U =then click Airport utility
set your TC with manual.
On piece of paper record Airport ID:
Click on TIME CAPSULE
I recommend change name not to use deffault long name for TC. Simply call it TC if you want. Set password.
In wireless. Write a name of your Network, keep it simple TC627 what ever. Write it down on paper. security WPA2 personal and password.
Update. and close utility
End of part 1
Part 2:
AEBS setup.
Switch AEBS on: No need to switch off TC
Press reset button for more than 5 sec. so everything is restore to factory settings.
-> in the bar top click wireless and select AEBS. You have to do this otherwise Airport utility will not recognise AEBS.
When you are done. Command shift U
Click airport utility. and manual setup.
-> write down the Airport ID.
Set up your AEBS, name something simple so you know what it is. Password and security.
Here do yourself favor use the same passwords as on TC and security.
NOW ->
click Wireless.
*Wireless network has to be same as on TC.*( it is on the paper)
Select Participate in wireless network
Radio mode b,g compatible or only N it is up to you.
I setup WPA2Personal again with the same password( same on TC)
Click WDS
Select WDS remote
select Allow wireless clients
and now write the TC airport ID into WDS main: number (it is on your paper)
Update.
switch off utility.
no go to right top and change airport back to TC.
Go to manual
Click Wireless:
Select Participate in WDS Network
Click WDS: wds mode to Main
allow wireless clients: and write into WDS remotes AEBS ID, (it is on the paper).
and update.
both airports will restart.
and you are extended.
You made it. Go to Utility Cmd,shift, U and you should be able to see both airports.
Now what you have to do is to take AEBS to different place.
Put it somewhere in second room. Go back to your computer. Leave it for couple of minutes. 10 -15 is ok.
to make sure your TC can find AEBS. If not TC will indicate by flashing green and orange. = >AEBS has to be closer.
correct is that TC has still green light.
Before you start with time machine: read what files to include
hope it helps.

instructions

Using Time Capsule to extend network

Hello: I have a Belkin N1 wireless modem router (ADSL) and have my Time Capsule connected the the modem via ethernet cable. I have the modem at the moment connected to my MacBook Pro via ethernet cable, and am able to connect to the Internet in that manner. My problem is that I cannot sem to extend my wireless network with my Time Capsule, which is what I want to do. Any advice or help? Thanks in advance.

I first tried connecting my new Time Capsule to my 2Wire gateway (DSL modem and router) via the ethernet cable to form a parallel network, but some incompatibility kept messing up the gateway's settings (resulting in losing Internet and phone altogether). I have since used the Time Capsule to extend the network via wireless only. This currently seems to work, although I have lost access to the Time Capsule on more than one occasion this afternoon for no apparent reason. I have not yet been successful in further extending the network using my Expresses -- which are used to connect ReplayTVs to the network.
Unfortunately, I cannot find a way to turn off the router function on the gateway (a previous DSL modem allowed me to do this -- most recently, I had my Extreme connected up via ethernet to the 2Wire gateway and forming a parallel network).
In case I need to replace the gateway to get this to work properly and in a stable fashion, does anyone know which AT&T DSL appropriate modems are most compatible with the Time Capsule?

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Time Capsule and Wireless Networking

I have three Macs and would want to share same iPhotos, Aperture and iTunes libraries on all Macs (2 MBPs, iMac). Can someone please help me what are the options?
Would Time Capsule work for this purpose?
I don't want to use same libraries on all three Macs at the same time but if uploaded some photos on MobileMe from iPhoto on one Mac then the other Mac when accessing iPhoto, should also have the same updated libraries/info.

I don't know about the photos, but it certainly is possible with itunes, I myself have that arrangement sharing between three computers.
Now, it requires a few steps.
Find your iTunes library on the computer copy the entire library AS IT IS! (that means: Album Artwork, the .xml files and the .itdb files including your "username library", for instance Freedom90), copy that to where you want it on the external drive/time capsule, set it up like this:
[externaldrive]iTunes/Freedom90/Library
"Library" contains the music, iTunes contains the settings and the database that tells iTunes what files are where and so on.
Second is to reset iTunes and point it to the new music location
You can either hold control down while opening iTunes or going to:
Preferences - Advanced and press reset then "change"
Point iTunes to the new location.
Repeat this step with the other computers.
On thing you should know: iTunes doesn't have any clue on how to monitor these directories, so each time you add music from one location you have to manually add them from the other locations.

Verizon FIOS, Time Capsule, and Airport Express - How to Extend Network

OK, I just got Verizon FIOS (TV, Internet, and phone). Don't care for the wireless router that is required to be used with it (want 802.11n and Time Capsule). I turned of the wireless on the Verizon FIOS router and installed a Time Capsule in Bridge Mode, which is how the Verizon rep told me to install it. As I understand it, the Verizon FIOS router is still handling DHCP, NAT, etc. I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode. I am desperately seeking any advice on how to use Verizon FIOS, my Time Capsule, and extend the wireless network to reach the farther corners of the house. I am using a Macbook and a Thinkpad as well as an iPhone on the wireless network with a Dell desktop connected to the Time Capsule via Ethernet. Any help or suggestions would be greatly appreciated. Before I switched, I had Cox Cable with a Buffalo wireless router and it had great range. Now I seem to be in a worse situation from a wireless perspective with higher TV and Internet quality. Thanks in advance.

Welcome to the discussions!
+I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode+
If you have an AirPort Express(n), you can configure it to "extend a wireless network". This is a more efficient way to add additional wireless coverage (and much easier to configure than a WDS arrangement).
However, if you have an older "b/g" AirPort Express, you must use the WDS configuration method with this device and the Time Capsule if you want to increase your wireless coverage.

Time Capsule and adding new computer to it to back up with time machine

I started by backing up my MacBook Pro on the Time Capsule using time machine using an ethernet cable. Fine no problem. Just took a long time.
So, next I wanted to also back up my wife's new MacBook. Every time I try to do this I get this message
" Time Machine Error
The backup disk image could not be created"
When you look at the Time Machine screen there's 322.9 GB available and all it says is "Failed"
I need to back up her machine. Is there a way to do this that I'm missing?
Thanks for the help.
Dave

DWBarnes, welcome to the discussions!
"Time Machine Error The back up disk image could not be created"
This error message appears when there are problems with the network communication between the Time Capsule and the computer. There are several things that you can try to correct this problem.
Step 1. Check Local Machine Name. Click on System Preferences and then click on Sharing. Make sure your computer's name is present. You might try simplifying the name as well by removing spaces, apostrophes, etc. if they are present. Do not exceed 25 characters.
Step 2. Check the Time Capsule Name. Use AirPort Utility to make sure that the Time Capsule and local network names do not have spaces, apostrophes, etc. Do not exceed 25 characters.
Step 3. Show Connected Servers on Desktop. Check Preferences in the Finder menu and make sure there is a check next to the box that reads "Connected Servers" under the heading "Show these devices on the desktop"
Step 4. Power down your system for 5-10 minutes. Power up your modem first and let it run for a few minutes, then the Time Capsule, etc. and then your computers.
See if that helps.

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

I have a 1st generation time capsule and an extreme b/g. Is the extreme slowing the network down

I have a 1st generation time capsule and an appe extreme b/g. Is the extreme slowing the network down? Should I dump it an get the new n version?

yes it is likely to be slowing down the network because you are using 802.11b/g
from what i recall with b/g a slow client can slow down the entire network to that clients speed.
this was the major improvement with 802.11n and Mimo. each client can be connected to the access point without affecting your speed to the rest of the network
its reccomended to get all new "N" equipment if you have the budget for it. some of those old airports and time capsules can still be worth something on amazon marketplace so you might be able to sell them
if you want to create / join / extend a netwowrk your going to probably need all "n" based equipment.
buy the new 4th generation time capsule or the new 5th generation airport they have better stronger radios
in the mean time configure your base station router to a high multicast rate, so it will prevent devices connecting to it at 1-2 mbps speeds and slowing down your network
if you have an apple care covered mac remember the airport / time capsule rule. all airports and time capsules purchased 2 years before you bought your mac to the 3 years of apple care covers them. if you do not have apple care then the standard warranty applies

I was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

i was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

Thanks for the info. Since this is a cable modem, you will need to fully reset it so that it will associate correctly with the Time Capsule when it is reconnected.
I don't have the manual for your Ubee model handy, but most modems will reset if you power them down completely. That means pulling the power cord from the back of the device or unplugging from the wall. Leave the modem powered off at least 30 minutes...longer will not hurt a bit.
Next, perform a Factory Default Reset on the Time Capsule per this document:
Resetting an AirPort Base Station or Time Capsule FAQ
After the modem has been powered down and Time Capsule has been reset, connect an Ethernet cable from the modem to the WAN port (circle icon) on the Time Capsule.
Power up the modem and let it run for 2-3 minutes by itself
Then power up the Time Capsule and let it run a minute or two
Next, open AirPort Utility and configure the Time Capsule to "Create a wireless network". Let us know what operating system you are using on your Mac or PC if you have additional questions or need more details on this.

Using a Time Capsule to Extend a Non Apple Network

I have a home network that i use to connect to through wifi, i tried to extend it through my Time Capsule and it said "This network cannot be extended".
Whats the deal?
Message was edited by: Robert Boinski

If you've managed to set the Time Capsule up to "extend a wireless network" from the Belkin router, you are the first person to report success with this type of configuration.
Would you mind posting the details of your configuration so that others might benefit from your success?
You can perform a quick check on your configuration by locating your Mac near the Time Capsule and holding down the option key on the keyboard while you click on the fan shaped AirPort icon at the top of the screen.
The BSSID you see will be the AirPort ID of the Time Capsule. If you perform the same check near the Belkin router, you should see a different ID, that of the Belkin. Is this the case?

Time Capsule and extend network

Similar Messages

Maybe you are looking for