Time Capsule and FIOS

Could I get some step by step on setting up cant seem to get it to work

Open the airport utility and click on manual setup.. go to the internet tab and choose connection sharing.. off (bridged). Then just plug it into the supplied modem.. the TC will get an IP from the router and will be accessible by either ethernet or wireless. But you should also set the wireless if you want to use it in some special way.. for a start though it is fine to just use default settings but add security.

Similar Messages

  • Time Capsule and FiOS wireless router

    Can I connect the Time Capsule to my FiOS router and then disable the wifi feature on the FiOS router?

    Are there any known issues with the TC in general, particularly from the wifi perspective?
    TC is much better than it was.. make sure you keep it cool.. place it up from the bench on a couple of pencils.. that stuff about conductive rubber.. ignore it.. rubber in all its forms is an insulator and holds in heat. If it does start running really hot.. it has a fault and you should take it back.. Same with hard disk.. they occasionally go bad.. so backup to it.. fine.. storing files on it.. no don't do it.
    Remember it is covered under your computer applecare.. so if you have any computer with extended applecare it will cover TC with certain conditions.. but that gives the TC effectively 3years warranty.. after that.. dispose of it and buy a new one.. the TC is not going to be reliable as the hard disk has been starting and stopping multiple times every day for 3years.. just don't trust them.
    Wireless is ok.. I don't think it is particularly good range wise. Although Apple said how much better it was than previous Generations.. I have had all 4 now.. and performance in my experience was line ball between all of them. Apple design their routers to work very well with AEBS or AEx so if you want to extend wireless it is simple.. just it doesn't work with any other brand.. apple now reflecting a rather dark empire tendency.. they used to critize in others.
    Clarification question...how do I backup my current files on the Lacie to the TC? Would that simply be connecting the two devices via USB and copying over?
    Backing up TM files?? Not a good idea.. TM works differently on local disks and network disks.. and TC is best left to do its own stuff. If you mean moving actual file storage.. don't. The TC is not a file store.. it is a backup target.. TC has no way to back itself up.. and TM cannot backup a network drive .. so you would have to buy 3rd party software anyway.
    Also USB on the TC is purely for printer and USB connected disk.. but you cannot directly copy from one to the other.. it would have to copy over network to the computer and then back to the TC.. it will be 2x to 4x faster if you do want to copy files to use Lacie plugged into the computer.. and copy to the TC. At least files are only going one way.

  • Time Capsule and SLOW bandwidth with Verizon FIOS?????

    Ok I have had verizon FIOS and my time capsule for almost 3 years. All running latest firmware updates (which might be the problem with the TC). For the last couple years it has been a blazing fast setup and I have a ps3, imac, macbook pro, apple tv, iphone, ipad, etc all hooked up to my network.
    Then 5 days ago I buy a new Imac and the firmware update for the TC. Now the bandwidth in my house has dropped to crap. I have directly connected to the FIOS router with ethernet and its like 20 megs per second down and10 up, but when I connect my time capsule back up and go from there it is like 4 down and 3 up? It was NEVER like this before....any ideas or suggestions?

    Welcome to the discussion area!
    Things were fine before two changes occurred on your network. So, it might be logical to try to isolate one thing or the other to arrive at a possible cause for your network slowdown.
    You need to completely power cycle the entire network after you make any change on a network, whether that be adding a new device (the iMac) or making another change (the firmware update).
    Power everything off...modem, routers, computers, consoles, printers, etc., the order is not important. Wait 5 minutes. Then power up your modem first and let it run for 5 minutes by itself. Power up the next device connected to the modem (probably your Time Capsule) the same way. Power up the next device the same way, etc. until everything is powered back up.
    What are your results?
    If things are still slow, remove one of the things that you changed on your network...the iMac...by powering it off, restarting your network again (the extended power off above is not necessary) and then checking the network again.
    Any change?
    If no change on the iMac test, then the other variable on your network is the firmware update. It's unlikely...+but possible+...that the firmware update changed something in the interaction between your Time Capsule and FIOS router, so something is not functioning quite correctly. Things like this can happen with firmware updates because while Apple knows what works among their own products; they cannot know what works in every instance when another product interfaces with one of of theirs.
    It should be possible to rollback the firmware on your Time Capsule to the previous version if you want to try that approach. There's no guarantee of course, that this will help either. Post back if you want to try this.

  • Time Capsule and Verizon FIOS

    A few years ago my Actiontec router for Verizon FIOS died and they wanted me to pay for another one. Instead of buying a new Actiontec router I bought a Time Capule. I have had no problems until yesterday. My time capsule had a solid amber color and the amber color did not go away no matter what I did. I took ethernet cable from the Time Capsule and plugged it into my iMac and I no problems accessing the internet.
    I should not have  to set up a PPoE connection because I can remove the ethernet cable from the TC and plug it into my mac directly and access the internet with no problems. (I had Verizon DSL some time ago.)
    I went out today an bought a new Time Capsule (4th gen). I came home and plugged the ethernet cable to the WAN Port and turned it on. I ran the airport utility and configured it. The TC rebooted and came up with a green light, but I had a problem. I could not access the internet.
    Here are some of my settings taken from the airport utility.
    Status: normal
    Version 7.5.2
    Wireless Mode: create a wireless mode
         Allow this network to be extended.
    Connect Using: ethernet
    Configure IPv4: Using DHCP
    IP Address: 169.xxx.xxx.xxx ( a real IP Address)
    subnet mask: 255.255.255.255
    Ethernet WAN Port: Automatic (Default)
    When I look at my network settings when the ethernet cable is plugged directly into my mac, I get these values:
    IP Address: 173.xxx.xxx.xxx
    Subnet mask 255.255.255.0
    Router: 173.xxx.xxx.xxx
    There are DNS entries
    I know human error is involved (mine). Did I miss something?

    A few years ago my Actiontec router for Verizon FIOS died and they wanted me to pay for another one. Instead of buying a new Actiontec router I bought a Time Capule. I have had no problems until yesterday. My time capsule had a solid amber color and the amber color did not go away no matter what I did. I took ethernet cable from the Time Capsule and plugged it into my iMac and I no problems accessing the internet.
    I should not have  to set up a PPoE connection because I can remove the ethernet cable from the TC and plug it into my mac directly and access the internet with no problems. (I had Verizon DSL some time ago.)
    I went out today an bought a new Time Capsule (4th gen). I came home and plugged the ethernet cable to the WAN Port and turned it on. I ran the airport utility and configured it. The TC rebooted and came up with a green light, but I had a problem. I could not access the internet.
    Here are some of my settings taken from the airport utility.
    Status: normal
    Version 7.5.2
    Wireless Mode: create a wireless mode
         Allow this network to be extended.
    Connect Using: ethernet
    Configure IPv4: Using DHCP
    IP Address: 169.xxx.xxx.xxx ( a real IP Address)
    subnet mask: 255.255.255.255
    Ethernet WAN Port: Automatic (Default)
    When I look at my network settings when the ethernet cable is plugged directly into my mac, I get these values:
    IP Address: 173.xxx.xxx.xxx
    Subnet mask 255.255.255.0
    Router: 173.xxx.xxx.xxx
    There are DNS entries
    I know human error is involved (mine). Did I miss something?

  • Verizon FIOS, Time Capsule, and Airport Express - How to Extend Network

    OK, I just got Verizon FIOS (TV, Internet, and phone). Don't care for the wireless router that is required to be used with it (want 802.11n and Time Capsule). I turned of the wireless on the Verizon FIOS router and installed a Time Capsule in Bridge Mode, which is how the Verizon rep told me to install it. As I understand it, the Verizon FIOS router is still handling DHCP, NAT, etc. I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode. I am desperately seeking any advice on how to use Verizon FIOS, my Time Capsule, and extend the wireless network to reach the farther corners of the house. I am using a Macbook and a Thinkpad as well as an iPhone on the wireless network with a Dell desktop connected to the Time Capsule via Ethernet. Any help or suggestions would be greatly appreciated. Before I switched, I had Cox Cable with a Buffalo wireless router and it had great range. Now I seem to be in a worse situation from a wireless perspective with higher TV and Internet quality. Thanks in advance.

    Welcome to the discussions!
    +I would like to extend the wireless network to reach some dead spots in my house. I have read that the Airport Express can be used to extend a wireless network from an Airport Extreme or Time Capsule, but it appears that I need to set up a WDS with the Time Capsule as the base station, which is apparently not possible on the Time Capsule in Bridge Mode+
    If you have an AirPort Express(n), you can configure it to "extend a wireless network". This is a more efficient way to add additional wireless coverage (and much easier to configure than a WDS arrangement).
    However, if you have an older "b/g" AirPort Express, you must use the WDS configuration method with this device and the Time Capsule if you want to increase your wireless coverage.

  • Time Capsule and External HD as Network Attached Storage

    I was wondering if I can
    a. Attached and external hard drive to my Time Capsule and access is wirelessly?
    b. Back up to that external hard drive using Time Machine?
    c. Access that external hard drive and Time Capsule from a remote place off site?
    Thanks

    a. Yes
    b. I think so. But why not just use the TCs hard disk for TM backups?
    c. Apparently so based on these instructions I have found: (Haven't tried it myself)
    In the Finder preferences check the box "show server" to mount to desktop.
    Under Airport Utility:
    Disks - check over wan and check file sharing and write down the ip address
    Under the Finder, use the GO function to find your server ie the hard drive on the TC. In the window provided type afp://ip address then password if applicable. The hard drive should mount and be shown on the desktop.

  • Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • I recently bought a new iMac as well as a wireless time capsule and have it connected how can I use this external drive as the location to store all my files for iTunes, or is this even possible?

    New iMac user here, I recently bought a new iMac and Time capsule and have the whole network up and running now. I have connected another external HD to the time capsule as well and have a total of 3 TB of storage connected wireless to my new iMac. My question is can I use this location as the default location for iTunes?  I doubt I am gonna run out of room considering the iMac has 1 TB of storage already, but I'd prefer to keep my movies and music off the Mac to keep it running smoothly. If this is possibly, I'd like to do this with iPhoto as well. 

    I would advise against placing your iTunes library on a Time Capsule.
    The Time Capsule is designed as a backup device and not for wireless streaming of video.
    Before you do anything more, can I suggest you put into place a reliable, redundant backup strategy.
    Unless you are prepared to risk loss of your iTunes library due to a hard drive failure, I would not put iTunes on the Time Capsule.
    Leave your iTunes library on your iMac until such time as your internal drive is full. Backup to Time Capsule using Time Machine and create a clone of your internal iMac HD to your external drive.
    That's my 2 cents worth. Others may have a different opinion.

  • Time Capsule and time machine with third party router

    Hi,
    This is the first time I use this site.
    I have over three years old Mackbook.
    APP has expired.
    Now I want to know how to set up time capsule in a new environment.
    I moved from Australian and Singapore.
    I was using Time Capsule and Airport Extreme in Australia.
    I have moved to Singapore.
    I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
    Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
    What I did so far is;
    Connected the time capsule to the power point.
    Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
    Apple Utility does not recognise Time Capsule.
    I prefer to use it wirelessly.
    There are only two USB cable ports installed.
    One is used to synchronize iPhone.
    Other is used for a printer.
    but if it is not possible, wired would be OK.
    MacBook 13 inch 2.0 GH Late 2006
    I hope that someone able to give me an answer for this.
    Cheers,
    morepubholidays

    In this case the apple support people reveal a truly poor understanding.
    You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
    IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
    If you already tried this and it didn't work.. try again.. it is the correct approach.
    You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
    So here is how to get the utility into your computer.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
    Select this and update..
    Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
    Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

  • New to time capsule and need help with installing it?

    I just bought a new 3tb time capsule and  also new to apple routers I want to use this as my new wireless router how do I go about switching this out with my router now. Im using a linskys router now nothing special I think its only a 300Mbps the only problem is that we just  had our new house complete and prewired with ethernet connection in every room and a security system that runs off of the router how do I go about switching that set up to the new time capsule? I know if I had to have the company come out to do it they charge a hefty fee which I know its that hard to do the only thing that's stopping me is that set up to the security system I don't want to screw that up???

    Three different aspects
    1. Set the form up to submit the data (XML or FDF), not the full PDF. You can import the data to the PDF on your end.
    2. You can turn on Extended Reader Rights, but then limit the use/users to 500 by the EULA. The applicability of this option depends on your intended application. In a small office, it would be fine. For general web use you would likely exceed the limit and be in violation of the EULA.
    3. There may be an e-mail problem, one reason that e-mail is not recommended for form submission (even if the manual discusses it). Again, in a controlled environment like an office it will probably work fine, but in a web setup it is best to use a web script. There are 2 problems with e-mail that both depend on the client system (YOU have no control, but will be blamed in any case). First, the client machine has to be set up as an active MAPI client. Many folks do not have this on. Second, some e-mail clients treat PDFs like text and the result is a corrupt e-mail submission, even if it makes to you.
    If you have the possibility of web submission, do it. I suggest only having the form data submitted and not the form.

  • 2TB Time Capsule and Time Machine on Snow Leopard 10.6.1 slooooooow

    I have a 2TB Time Capsule on a 100Mps LAN that is shared by my Mac Pro and an iMac G5. No USB devices are connected to the Time Capsule. The Time Capsule and both computers are connected to the LAN through a LinkSys 8-port Cable/Router/DHCP.
    While in Time Machine (about 30 backup folders) looking for a file to restore, it takes 2-5 minutes for Time Machine to change between backups. The time line on the right responds extremely slowly.
    Whether or not the iMac is backing up has no effect.
    Is this normal?
    Thank you,
    Don

    See: http://www.codedifferent.com/2009/09/02/howto-reactivate-your-kyocera-printer-un der-mac-os-x-snow-leopard/
    We have a KM-2550 and this solved it. HTH.

  • I recently purchased a time capsule and thought I would put my itunes on it as an external drive as my mac book air only has 120gb. However I can not be connected to the internet and the TC at the same time in order to download the files to the TC. Help?

    I recently purchased a Time Capsule and put my iTunes library on there so that I wasn't using up my hard drive space. Only 120gb on my mac book air. However when I download songs from iTunes I can not be connected wirelessly to the internet at the same time. Can I hard wire my TC in to my mac so that I can treat the TC as just an external hard drive? Thanks

    Initially, you asked if you can hardwire your MBA to the TC. The answer is yes, by using the optional USB Ethernet adapter that Apple provides. However, in order for your MBA to access the TC's internal or USB-attached HDD, it would need to establish a network connection to it. This would be true of any NAS device on an Ethernet network. Therein, lies the problem. Your MBA cannot connect to two networks simultaneously.
    One option then, would be to have two separate iTunes Media folders; one on the MBA & the other on the TC. This way, you can download the music to your MBA when connected to the Internet at the AirPort lounge, and then use iTunes Consolidate Library feature to transfer the audio files to the TC's iTunes Media Folder location. A great program to help maintain multiple iTunes Librarys and/or Media Folders, that you may want to consider, is PowerTunes.

  • Setting up Air play with new time capsule and newer airport express?

    I just recently purchased a new time capsule, and I'd like to use my current generation airport express to stream music from my apple devices. I just was wondering what I had to do in airport utility to set this up?  I was also wondering how to transition the network over from the old express to the new time capsule as far  software settings go. I really appreciate the help and assistance. Thanks folks. I'm really looking forward to setting up the network for our new iMac.

    Your setup is very easy..
    This is how I would do it.
    Remove the express from the network.. ie just unplug it but do not change anything in it. Keep the configuration as is until the TC is working.
    Power off the cable modem.. this is requirement.. at least 20min is usually needed, dependining on your ISP.
    Go into the airport utility and setup the TC as router for your network .. it is a simple setup.. but I would do as stated.. all short names, no spaces pure alphanumeric rather than accept Apple's names. That is for TC and wireless.
    After 20min power up the cable modem.  Once it is running and you have internet access. you can proceed to setup the express to do the airplay. If the internet still doesn't work, power off the cable modem overnight..
    Do not lose that express setup so if you absolutely have to, you can at any time substitute it back and have internet again.
    So everything is working properly TC in place as full router.. now hard reset the express.. and simply use the airport utility to put it in extend wireless .. or plug in by ethernet if you are going to hard wire it.
    The extend wireless setup is all done straight from the existing setup.
    Now you can plug your express audio port into your speaker.. and setup the airplay via the itunes.
    I will get Bob to give you his way of doing it.. There is no one RIGHT way .. but he can give you more info if you want a particular method.

  • Trying to restore after getting a new hard drive.  I can see the backup on the Time Capsule and on the correct date but it is Greyed out.  That is it wont let me open it and restore the machine.  Have tried also Migration Assistant, no luck.

    Trying to restore after getting a new hard drive.  I can see the backup on the Time Capsule and on the correct date but it is Greyed out.  That is it wont let me open it and restore the machine.  Have tried also Migration Assistant, no luck.

    https://discussions.apple.com/thread/5210788?tstart=0
    At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

  • I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

    You just need a powered hub.. if you already use one then fine.
    Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
    Pick whatever size suits.. nowadays 2TB are most economical.
    WD, Seagate have goobled up all the minor players.. so pick one.
    Whatever suits your budget and asthetics.
    NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

Maybe you are looking for

  • Implicit Fact Column - am I thinking about this the right way?

    My exploration of the Implicit Fact Column is below. Let me know if you think this is the intended usage. When the BI Server sees a request where one Dimension is being constrained by another, it has to pick a fact table that contains references to t

  • VI to calibrate LVDT

    I am using LabVIEW 7.1 to develop a gauging application.  I am using a SCXI-1600 for the DAQ and a SCXI-1540 with a SCXI-1315 terminal block to connect to my LVDTs.  I would like a way to make a VI to allow the operator to calibrate the LVDTs.  Is th

  • How to unlock Iphone4?? PlEASE READ

    Hey guys I have bought an Iphone4 from new zealand. All the phones brought from New Zealand are UNLOCKED. But then I had to get my phone replaced (from apple Australia) because my home button was not working well. It was all good till here, because i

  • Has anyone experienced a sudden deletion of saved email messages?

    We have recently experienced a deletion of a number of older e-mails. Does anyone know why this has happened.   Also, I had saved a number of PDF's in the library and now they are gone.  Any ideas what is going on.

  • UPDATE STATISTICS and merry-go-round scanning

    Hello everybody, if I do UPDATE STATISTICS [table] SQL Server internally scans the table multiple times for different statistics objects (good description by Kendra Little at http://www.brentozar.com/archive/2014/01/update-statistics-the-secret-io-ex