Time Capsule and HP LaserJet P2015d Printer

I have recently set up a new Time Capsule as my main base station and it is working great as a Wireless router and Time Machine Backups. However, I have just plugged my HP LaserJet 2015d printer into the USB port and it is not being recognized. It doesn't show up anywhere, either in the printer settings box or the printers section of the Manual Setup in Airport Utility.
Can anyone shed light on what I need to do to get the printer to be recognized or point me to a list of compatible printers? I have been through the various troublshooting documents I can find and so far no luck.
Thanks,
Drew
Message was edited by: Drew Fulton

Hello Drew Fulton. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if the printer you are interested in is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Similar Messages

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

Time Capsule and all in one printer HP Photosmart C5580

How can I get the HP Photosmart C5580 working fine with time capsule?
It prints but do not anything else, like scanning, etc...
Thanks in advance,
AZ

Bob,
I am having a similar problem as this person. I have a HP Photosmart 3210. I figured out that I could not use the scanner with the USB on the Time Capsule so I connected the printer via the ethernet port on the Time Capsule to make it a networking printer. This allowed me to see the printer and scanner, but I still can not get the scanner to work. I have all the software updates for Mac and HP. When I go to scan the software says "Trying to Open session with device" and after 30 seconds it will say "Failed to open session with device". I know the software works because if I connect the printer directly into my compute with USB everything is good. Also, if I go into the Embedded Web Server (while printer is connected to Time Capsule with Ethernet) of the printer I can perform a Preview and I will see the scan of the item in the scanner, but I still can not scan. Any ideas? I have to talked to both HP and Apple without any ideas.
Thanks

Time Capsule and all in one printer HP Photosmart C4280

Hello,
I recently got me a Macbook pro finally. Its awesome!! I love it. Im looking to get Time Capsule or something like that. I want to be able to hook my printer up to something and print from other room. I want to print wirelessly...the scanning and copying feature really doesnt bother me not to have.
Any know if the Time Capsule works with the HP Photosmart C4280. I got this printer with my computer. Its a multi function printer.
The backup feature is neat, but its not as important to me...Im sure it will be if I never lose my hard drive.
Anyone have any advice? Anyone have the HP Photosmart C4280 printer running on time capsule or any other wireless device in order to print wirelessly? Thanks
Amy

Hi Amy,
It should work just fine as a printer. I have a similar setup, and printing works, but I can't scan or fax across the network.
I'd probably recommend the Time Capsule over an Airport Extreme- your MBP can use it for Time Machine backups- untethered!
I've got one on order for our Mac notebooks.
Oh yeah: we have an HP Printer, too. Works fine.
If you price out 500GB and 1TB drives and wireless N routers, I think you'll see that Time Capsule is a pretty good deal.
Enjoy your new Mac!
Message was edited by: Seanessy

Time Capsule and Lexmark S605 Wireless Printing

I have been a happy Mac user for years now and have convinced nearly all of my friends to make the switch. However, I recently a new MacBookPro which was bundled with a Lexmark S605 printer last week and have had nothing but issues...complete opposite of my previous experiences with Apple.
I cannot get this Lexmark printer set up to work over the Wifi connection to my time capsule. Have just updated the time capsule firmware and I still receive the "unable to connect to router" error on the printer (although it does recognize the network in the network list on the printer, it just will not connect). The wifi indicator on the printer is blinking in orange.
Has anyone else experienced this issue? Any help in getting this printer to work on my Wifi network would be much appreciated.
Richard

Have you setup MAC Address access restrictions on your time capsule? If yes your lexmark mac-address can be found opening your printer.
two recommendations:
1) Although the s605 is wireless-n capable it works only on the 2.4 Ghz Band
2) Don't install the Apple Lexmark Update (1 and 2) if you want to use it over wifi. Just install drivers and utilities from lexmark site.
regards

If I get an airport Extreme/time capsule and plug a USB printer into it does it become an airplay printer so I can print from my I devices

I wanna get a new airport express or time capsule, I'm leanin towards the time capsule but in wanna know If I plug my USB printer into it if it becomes an AirPlay printer so I can print from my iPad

Nope. It's got to be a real AirPrint printer.
However, you may be able to use an app and print the way you described. Check out printopia.

Time Capsule 7.5.2 + usb printer Epson R300 = BROKEN

Hi everyone,
I could really use your input.
I have a 1Tb Time Capsule and an Epson R300 printer.
The printer is connected to the Time Capsule through USB and before the 7.5.2 update they worked perfectly (that is: Time Capsule recognized the printer, I could print wireless, etc.).
After the update, Time Capsule says it has a USB hard drive connected for which it cannot supply enough voltage (and there is no hard drive connected, only the printer).
Also, the printer does not longer appear in the Airport Utility tab for PRINTERS.
I already downloaded the latest drivers from Epson with no luck.
Certainly the problem is with 7.5.2.
Has anyone else run into this?
Do you have any suggested work-around?
Thanks.

You always have the option of rolling back to the previous version of firmware on your device.
Open AirPort Utility - click Manual Setup
Click the AirPort Utility menu at the upper left of the screen next to the Apple icon. Hold down the option key on your Mac while you click the Check for Updates and list of firmware versions will appear. Select the previous version that you were using and re-install.

I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.

It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

2TB Time Capsule and Time Machine on Snow Leopard 10.6.1 slooooooow

I have a 2TB Time Capsule on a 100Mps LAN that is shared by my Mac Pro and an iMac G5. No USB devices are connected to the Time Capsule. The Time Capsule and both computers are connected to the LAN through a LinkSys 8-port Cable/Router/DHCP.
While in Time Machine (about 30 backup folders) looking for a file to restore, it takes 2-5 minutes for Time Machine to change between backups. The time line on the right responds extremely slowly.
Whether or not the iMac is backing up has no effect.
Is this normal?
Thank you,
Don

See: http://www.codedifferent.com/2009/09/02/howto-reactivate-your-kyocera-printer-un der-mac-os-x-snow-leopard/
We have a KM-2550 and this solved it. HTH.

1st Gen Time Capsule and External Hard Drive Issues

I have a 1st generation Time Capsule and have never had any luck connecting an external hard drive (both Western Digital MyBook and Seagate FreeAgent Pro) via an USB hub for an extended period. They will connect for a few hours or up to a day or two before they lose the connection and look up the wi-fi connection (although the internet and connected printer don't seem affected). Thought it might be an issue with the powered hub, but have same issue with both (Belkin and APC). I have read that others have had similar issues.
For laughs, I connected a dinky personal drive (WD My Passpoert 750gb) to the USB hub and it came up instantly and had no issues for the 12+ hours it was connected. Question #1: can I run a portable drive for an extended period of time (weeks, months, years) via USB hub without killing it?
Also, I would like to house my large iTunes and iPhoto libraries to be accessed by 3 different MacBooks. Question #2: is a NAS drive connected directly via ethernet to the TC is the best answer?
I am spoiled by the simplicity of the plug-and-play connectivity of Apple products. Is there a mysterious sequence of procedures that I need to follow to get the Time Capsule to play well with the USB connected HDs?
Thanks in advance for your help.

To answer the general question, a drive that is constantly spinning is both more likely to be damaged and less likely to give issues of access to the USB.. the one fights the other. Feel the small passport drive and see if it is continually spinning.. if so that could account for it maintaining connection.. although according to your testing 12hrs is not long enough to know for sure. Feel the other drives. If they spin down and then when you try to access them, do they spin up? Or is it the spin down time that dictates the time they are available on the network. It may simply be a case of usb connected to a router is not getting the correct spin up info.
IMHO a NAS is the right way to do this.. especially if you have multiple computers accessing it. USB is not a fast connection. Especially hanging off the TC series 1, were not renowned for speed. A NAS is not that expensive now and using a mirrored raid you at least have some protection. Remember to always have the source files in mulitple locations. A NAS can also work as an itunes server, which the TC cannot. And the connection from gigabit ethernet to sata is not made via usb.
As a secondary option.. open your series 1 TC and put in a 2TB hdd.. this is well documented.. larger sizes give trouble but the series one can easily be updated to 2TB.. remember also the power supply in a series one can go at any moment. Get ready for it, plan for it.. one day it will happen.

Question on Time Capsule and external USB HDD

Hello everyone,
I have a 500GB Time Capsule that is working wonderfully. I recently have been downloading a number of large .iso image files that are taking up a lot of space on my internal drive on my Macbook Pro. I do not back these files up on the Time Capsule as it is getting full and i want it to backup other more important things.
I do however wish to backup these files. My current desk is rather full and really will not allow me to purchase a large 3.5" HDD and plug it in USB.
Is it possible to plug an external drive into the back of the Time Capsule and have it be used as a wireless disk as well?
I would prefer to have that drive not be part of the Time Capsule disks, i just want to be able to access it wireless over my network.
I would be grateful if anyone can help me out. If this solution will not work, is there some sort of NAS disk solution i can get to work with my TC?
Thanks

All you need is an external USB HDD. It needs to be formatted HFS+ (Mac OS Extended - Journaled), if you plan on a future Time Machine Disk on this drive, or FAT/FAT32. You could get a NAS, but you don't need to if you already have TC. Can I assume the USB port is free or do you have a USB printer hooked up to it?

Time Capsule and Windows Vista network

Hi everyone,
Just looking for some advice/feedback.
I have recently purchased a MacBook Pro and love it. Now considering buying a Time Capsule - 3 reasons - extra storage space, allow printing from all computers, and ease of backup with Time Machine.
I currently have a DLink wireless modem/router that is wired to a Windows Vista PC, a windows laptop and the new Mac.
My question is: How will the Time Capsule fit in with everything? I am guessing that the DLink will remain wired to the PC, and the Time Capsule will be plugged into the DLink. Will I gain extra speed with the Time Capsule and how do I allow it to take over the wireless network?
Any help/suggestions will be greatly appreciated. Thanks!

Welcome to the discussions!
"When I try
to connect it sees the new network I set up,
but won't connect to the internet."
Are you saying that the Vista PC will connect to the wireless network, but can't get an internet connection, or it can see the wireless network, but can't connect?
If it cannot connect to the wireless network, is there an error message displayed? If so, what does the message say?

First generation time capsule and older air express with Lion

I think the change/update to Netatalk has left many of Apples own devices stranded on Lion. I had to eliminate my backup to time capsule and move it to a local firewire drive. Printing has also slowed to a crawl.. no more hit print and get from printer; now it is several minutes.
What have your experiences been on these older Apple devices. Has anyone found a way to update or heard if Apple plan to make updates available. I assume the go to market of Lion did not allow time for regression testing on an array of Apple devicea.
I guess one fix is to get rid of and purchase all new devices. that is not very green let alone consumer friendly...
Any solutions welcome!

Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
Would the new airport extreme fix the problem?
Unfortunately, no.

Time Capsule and HP LaserJet P2015d Printer

Similar Messages

Maybe you are looking for