Time capsule and mail not working

Recently purchased my 500gb time capsule and successfully set it up as the primary wireless router for home.
Back up and internet works fine through my broadband connection, but I can not download any of my pop mail.
I connect the ethernet port directly to my iMac and all is fine.
I experimented in creating another account and forwarding the original account to the new one. It worked for the first day and then did not receive any more mails. When I click get mail the activity window shows all the right stuff to retrieve new mail, but nothing appears in my inbox.
I have even tried to forward to my mobileMe account and the activity window goes through its paces, but no mail is shown in the inbox.
This is most frustrating and I hope some one has a solution.
Thanks

Also on testing mail, I can send mail from both accounts to myself and see them through the web applications of my Hosting company and mobile me mail, but not mail on my iMac...

Similar Messages

  • Just bought Time Capsule and do not intend to use as a router. Can I use it just as a wireless backup to my Mac?

    Hi all - Just bought Time Capsule and do not intend to use as a router given that my Uverse router works splendidly.  Can I use it just as a wireless backup to my Mac? Sorry if this is a boneheaded question, but this is my first time backing up my machine ( I know, foolish). Thanks!

    Your problem will be if you use wireless for internet then you cannot do both internet and backup at once.. you still should plug the TC into the uverse router and set it in bridge mode.. you can setup wireless if you like on the TC and use either TC or uverse but you must work out how to do both at once.
    If you use ethernet on the Mac then wireless to backup is also a bit of an issue.. please ask as I can show you the setup.. or visa versa.. wireless for internet and ethernet for backup..

  • Time capsule now does not work with Lion just installed.

    Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

    Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
    If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
    In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

  • I got iPhone4 and safari and mail not working just blank screen appear

    I Got iphone4 after update to 6.1.3 YouTube,safari,and mail not working just appear blank screen wen i try any of thease app anybody can help me thank

    tried
    http://www.apple.com/support/iphone/assistant/phone/#section_1

  • Hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??

    hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??

    What exactly happens when you try to restore via iTunes?
    Error messages?

  • Facetime, iMessage, and Mail not working after iOS 6.1.3 update

    I've had my iPod touch 4th generation since Oct 2010 and never updated the iOS until very recently. Before the update, Facetime worked consistently and easily. After I finally got around to updating my iOS a week ago, my iPod has come into severe issues.
    99% of the time, I cannot send or receive Facetime calls. If I try to make a call, it doesn't make the dial tone and eventually it just says "Connection Lost". Nothing happens if someone is trying to send me a call. I only Facetime with my boyfriend and his iPod hasn't changed since Facetime was last working. HIs other iPod is also updated with iOS 6.1.3.
    I never used iMessage before the iOS update, but because it says on Apple support that it uses push notifications like Facetime does, so I tried it. Most of the time, I cannot send or receive messages. I rarely used Mail before the update, but I never had a problem with it. Now, when I enter my gmail password, it keeps saying my username and password are not correct, even though I haven't changed my credentials.
    I only use my iPod for Facetime, iTunes, and Pandora. I don't need iMessage or Mail, but I am testing with those to see if this can help find the root cause of the problem. Pandora works smoothly so I know it's not a wifi connection issue. I have searched for remedies on end and tried:
    1.  Reset, turn off/restart, turn Facetime on and off, etc.
    2. Changing the DNS server address to 8.8.8.8, which made Facetime work normally for one time and never again
    3. Updating my Apple ID password online, then signing out and signing back in
    4. Creating another Apple ID with my other gmail account. Maybe 1 out of 10 Facetime call attempts, I can generate the dial tone, but when my boyfriend clicks to receive the call, it says that I am unavailable. iMessage has about the same success rate. It seems when I miraculously can send or receive texts through iMessage, I can manage to get the dial tone when I try Facetime, though the call cannot go through.
    This is of course extremely frustrating and I highly regret the update now. I was hoping for an improved iPod after the update, and now I have a near-dud! I did make sure to check my location and date and time, and both are correct (US, Central time). Any help would be greatly appreciated. Thank you.

    I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.

  • Time capsule base station not working with Airport Express

    Hi...
    I have a network setup using the airport base station hat is part of my (older) time capsule.  I also have an older Airport Express.
    My network is working fine...and looks like the first image below.  When I plug in the Airport Express and reset it...I get what you see on the second image.  The thing is...the airport utility is supporting the base station just fine prior to looking for the airport.  I presently have airport utility 6.3.2 and my airport base station has firmware 7.6.4. 
    Any help would be great....thanks!

    Your express is a G wireless model and not compatible with the N wireless TC.
    You can use it but only by using it with ethernet and setting it up as AP.. you also need to use 5.6 utility not v6.. apple removed support for G wireless devices from v6.
    LOL..
    I was 2min late.

  • Nokia browser and mail not working

    I was browsing with my asha 201's in-built browser when I got a pop up message to upgrade it, I ognored it the first time but ehrn it became incessant, I decided to jst upgrade it and since then it's not being working and it also kind of affected my mail.
    Any one to help

    hi mate, have you tried uninstalling then reinstalling the Nokia Browser from http://download.browser.ovi.com ?

  • Kext cleanup, now time machine and itunes not working

    I cleaned up all my kext files from Sep 2013 back (as suggested in an article) to address the kernel_task overload, but now itunes won't play (play button works but songs do not move forward), time machine will not restore backup and no audio comes from google chrome. Do I need to reinstall each individual program/application? Will a reinstall of Mavericks work?

    The article was written by an idiot.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Yosemite Very Slow, Spotlight and Mail not working.

    Yosemite has brought my iMac mid-2010 to a crawl. 
    Try to delete mail in browser and instead of deleting, just jumps to a different email and selects it. Also, spotlight's not doing anything.  I type the name and it just sits there. No movement, no acknowledgement.
    On iMac 27 inch mid 2010
    2.93 ghz intel core i7
    12gb 1333mhz ddr3

    10/30/14 11:39:08.444 PM gkbisd[28620]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:39:08.444 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28620]) Service exited with abnormal code: 71
    10/30/14 11:39:08.444 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:39:18.452 PM gkbisd[28621]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:39:18.452 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28621]) Service exited with abnormal code: 71
    10/30/14 11:39:18.452 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:39:19.755 PM locationd[192]: Location icon should now be in state 'Active'
    10/30/14 11:39:21.660 PM locationd[192]: NETWORK: requery, 0, 0, 0, 0, 1, items, fQueryRetries, 0, fLastRetryTimestamp, 436430265.1
    10/30/14 11:39:26.123 PM locationd[192]: Location icon should now be in state 'Inactive'
    10/30/14 11:39:26.000 PM kernel[0]: Sandbox: com.apple.metada(402) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    10/30/14 11:39:26.000 PM kernel[0]: Sandbox: com.apple.metada(402) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    10/30/14 11:39:27.000 PM kernel[0]: Sandbox: com.apple.metada(402) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
    10/30/14 11:39:28.459 PM gkbisd[28622]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:39:28.459 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28622]) Service exited with abnormal code: 71
    10/30/14 11:39:28.459 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    both searches in spotlight
    10/30/14 11:41:28.558 PM gkbisd[28652]: sandbox_init: com.apple.gkbisd: profile not found 
    10/30/14 11:41:28.558 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28652]) Service exited with abnormal code: 71
    10/30/14 11:41:28.558 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:41:34.006 PM locationd[192]: Location icon should now be in state 'Active'
    10/30/14 11:41:38.563 PM gkbisd[28653]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:41:38.564 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28653]) Service exited with abnormal code: 71
    10/30/14 11:41:38.564 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:41:48.573 PM gkbisd[28654]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:41:48.574 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28654]) Service exited with abnormal code: 71
    10/30/14 11:41:48.574 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:41:58.579 PM gkbisd[28655]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:41:58.580 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28655]) Service exited with abnormal code: 71
    10/30/14 11:41:58.580 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:41:58.783 PM locationd[192]: Location icon should now be in state 'Inactive'
    mail typing slow
    10/30/14 11:51:39.078 PM com.apple.iCloudHelper[28538]: AOSKit ERROR: Failed to get mail props (doBypassCache=0, user=********@[email protected], passwordProvided=0), accountInfoFound=0, mailDataclassInfo= 
    (null)
    10/30/14 11:51:49.072 PM gkbisd[28719]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:51:49.072 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28719]) Service exited with abnormal code: 71
    10/30/14 11:51:49.072 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:51:59.081 PM gkbisd[28720]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:51:59.081 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28720]) Service exited with abnormal code: 71
    10/30/14 11:51:59.081 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:52:02.382 PM AppleSpell[458]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
    10/30/14 11:52:02.382 PM AppleSpell[458]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
    10/30/14 11:52:02.382 PM AppleSpell[458]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
    10/30/14 11:52:02.382 PM AppleSpell[458]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
    10/30/14 11:52:02.383 PM AppleSpell[458]: *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection is invalid
    10/30/14 11:52:09.089 PM gkbisd[28721]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:52:09.089 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28721]) Service exited with abnormal code: 71
    10/30/14 11:52:09.089 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/30/14 11:52:19.100 PM gkbisd[28722]: sandbox_init: com.apple.gkbisd: profile not found
    10/30/14 11:52:19.100 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[28722]) Service exited with abnormal code: 71
    10/30/14 11:52:19.100 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:00:27.158 PM gkbisd[29702]: sandbox_init: com.apple.gkbisd: profile not found 
    10/31/14 9:00:27.158 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29702]) Service exited with abnormal code: 71
    10/31/14 9:00:27.158 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:00:37.168 PM gkbisd[29703]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:00:37.168 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29703]) Service exited with abnormal code: 71
    10/31/14 9:00:37.168 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:00:47.178 PM gkbisd[29704]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:00:47.178 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29704]) Service exited with abnormal code: 71
    10/31/14 9:00:47.178 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:00:57.185 PM gkbisd[29705]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:00:57.186 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29705]) Service exited with abnormal code: 71
    10/31/14 9:00:57.186 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:01:07.194 PM gkbisd[29706]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:01:07.194 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29706]) Service exited with abnormal code: 71
    10/31/14 9:01:07.194 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:10:07.630 PM gkbisd[29772]: sandbox_init: com.apple.gkbisd: profile not found 
    10/31/14 9:10:07.631 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29772]) Service exited with abnormal code: 71
    10/31/14 9:10:07.631 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:10:17.637 PM gkbisd[29773]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:10:17.637 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29773]) Service exited with abnormal code: 71
    10/31/14 9:10:17.637 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:10:27.645 PM gkbisd[29774]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:10:27.645 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29774]) Service exited with abnormal code: 71
    10/31/14 9:10:27.645 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:10:37.652 PM gkbisd[29775]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:10:37.653 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29775]) Service exited with abnormal code: 71
    10/31/14 9:10:37.653 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    10/31/14 9:10:47.659 PM gkbisd[29776]: sandbox_init: com.apple.gkbisd: profile not found
    10/31/14 9:10:47.660 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd[29776]) Service exited with abnormal code: 71
    10/31/14 9:10:47.660 PM com.apple.xpc.launchd[1]: (com.apple.gkbisd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    <Personal Information Edited by Host>

  • Time Machine and Finder not working

    I have Mac OS 10.6.3. My internal harddrive is full but I cannot back up my data on external hard drive. I tried moving files to external drive using Finder but Finder never finish the transfer and hung. Finder works okay but hang up when dealing with external drive. I tried to force quit finder and relaunch. But on relaunch it is giving me error 10810 and says :"finder cannot be launched". I have to force Macbook shut down. I tried Time Machine but it also hang and I have to shut everything down.
    I have bought bigger hard drive and used disk utility (restore) to clone my hard drive. But I won't get rid of this problem. I won't be able to back up my data by upgrading hard drive as it is clone of my old hard drive and will carry all problems forward.
    any suggestions how I can get rid of this problem? I want to backup all my data and some applications too which I have paid for but lost installation CDs.

    nasarke wrote:
    Invalid sibling link
    Rebuilding catalog B-tree.
    Does this means that I cannot retrieve any data form this disk. This is the only disk I have with all my data.
    This is your backup disk, right? You still have the original data, on your +internal HD,+ don't you?
    See the pink box in #A5. Those errors are some that +Disk Warrior+ can often repair. As it says, your only other option is to erase the disk and start over.
    I will buy new external drive and try to back up with time machine. I have few questions
    Ideally, you need one disk for Time Machine, another for a "clone." If it's large enough, you can put them in separate partitions on the same drive, but when it fails (and they all do, sooner or later), you risk losing both.
    1. Should I clone new drive (I haven't installed it yet) with my repaired internal drive before I install it.
    That would be safest. Then you can boot up from it to be sure it's working ok. Run a +*Verify Disk+* on it, and use many of your apps to confirm that everything's ok before taking the old HD out.
    2. Is there any difference between using Disk utility or with Super Duper.
    Yes. Use CarbonCopyCloner or SuperDuper. They're designed for this, and when/if necessary, you can run updates to them. With Disk Utility, you can only run a whole, new "clone."
    3. Should I partition new external hard drive I buy.
    If you're going to use it for other things besides Time Machine backups, yes. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • Safari and Mail not working, and now software update not running!

    Hello, can anyone can help?
    I was running 10.3.9, no problems, with safari, mail etc, through my standard third party router. Then today safari won't open up, just goes into spinning ball. Mail won't even open. I have re-installed the system from original discs back to 10.3.3, but still no luck. I can't even run software demag from a download of the apple site, whirling ball again.
    Do I need to go for full system default re-instal, as I will loose all my mail folders and safari settings?
    Pretty stuck at the moment......

    Sounds like a problem with your internet service provider. Perhaps contact them and see if they are experiencing problems. The other thought is the modem and next is the router.

  • Time Capsule and extend network

    Hello,
    my connection between Time Capsule and router is nearly working, but not perfect. Router an Time Capsule are connect via WLAN. Setup an possition of the router can not be changed. The router is far away from my laptop , so there is a very poor connection. Thats why I wanted to extend the network. Extending with WDS is not possible because of the router configuration. I have choosen " extend network" in the Time Capsule setup, picked the network from the list and entered the key ( 128 bit WEP ). Time Capsule tells me it could not extend the network, although I can access the Time Capsule and have a working internet connection. I am accessing the Time Casule via Router and all wireless, so the router an Time Capsule have to be connected, somehow. Can someone help me to get this setup really working? Or is it possible to access the router via Time Capsule? Because the Time Capsule is close to my laptop an I would have ab better connection like this.

    This is not the actual problem. The connection is working, but very slow, because the router ( with dd-wrt software on it ) is too far away. So i wanted the Time Capsule to support the network. Connecting router and Time Capsule with WDS is not possible, because the setup of the router hast to be NAT. There is a another option in the Time Capsule setup to extend a network without WDS, which I wanted to use. The Time Capsule connect to this network via WLAN ( otherwise I could not access it ) but it does not extend the existing network. This is problem with Time Capsule an router. I wanted to know what I have to change in setting so that the Time Capsule extends the network. Is there somthing special with password or IP adress ( at the moment it is set to DHCP ), .... ?

  • Mail not working in new mini mac

    i got new mini mac and mail not working. i get this message.
    You have Mail version 4.2 (1078/1084). It can’t be used on Mac OS X Version 10.6.8 (Build 10K549). For more information, click the Help button.
    dont know what to do
    thanks

    Should be Mail 4.5.  With Spotlight, check to see if you have more than one version of the Mail app onboard.  Also, make sure that there is one at the root level of the Applications folder, and that it is namely simply Mail before applying the Combo.
    Ernie

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Maybe you are looking for

  • Is there a way to have iMovie NOT blow up a small video size .mov?

    hi, I am animating an 8-bit flash video and basically, when all is said and done I want it to be maybe 200X200 dimensions in iMovie. (Its the latest version of iMovie) I export the .mov of the 200X200 video and when I import it into iMovie it just bl

  • Low memory warning on my iPad (3rd gen)

    I'm receiving a low memory warning on my iPad (3rd generation), but I can't find the RAM info anywhere under the Settings.  I always close my apps using the Home button, so nothing should be open except the app I'm using.  How can I see the RAM avail

  • Creative Cloud is requiring an update.  However, nothing is downloading.

    Creative Cloud is requiring an update in order to download a trial version of Illustrator.  However, nothing is downloading on the update.

  • Retricted item access

    hi, How can I retricted public user to read file description only and cannot download the file? We Only want to let registed user to download the file only.

  • Having issues getting a Premiere project to pen in Speedgrade...

    I shot some test footage in 2K on an Arri Alexa in Log C today and I imported the three clips into Premiere Pro CC (7.21).  I created a simple sequence and attempted to direct link to Speedgrade. Speedgrade CC opens up it usually does but then I get