Time Capsule and only 120 kB/sec over ethernet?

Hi Community,
I want to connect a Mac Mini (late 2009) and a Time Capsule (4th gen) over ethernet.
Even if I connect them directly (with a cat 6 cable, 6ft = 2m in length) I have a maximum transfer speed of around 120 kBit/sec ~ this is roughly 1/100 th of which is possible over gigabit ethernet (if hdds would be really fast ;-) .
The time capsule worked for about a year wirelessly and served my MacMini and my MacBook Air... but I have the cables and liked to gain some speed (and not have so much usage on my wifi).
I made a factory reset and put the Time Capsule in a No-Wifi-No-Internet mode with "hard wired" IP -- so it should work like a simple wired NAS.
Working with a switch (Netgear GS) I get the LED info, that the switch senses a gigabit-connection for the Mac Mini and the Time Capsule.
BTW: My internet download speed ist roughly at 600 kBit/sec -- so the Mini could handle more, which means: the Problem lies within the Time Capsule.
Can anyone help me? Is my TimeCapsule defective?

WLAN is deactivated in the Time Capsule and the Mac Mini. My "test-object" is my saved Mountain-Lion-Image with 4,4 GB in size -- forget to mention: The Mini runs on Mountain Lion.
I never tried the ethernet LAN connection before... so I don't know, if it would have worked with Snow-Leo or Lion. But as said before... downloading from the internet I can get 600 kB/s which is limited by my 6MBit DSL line.
Unfortunately I don't have another gBit ethernet Mac to test the Time Capsule. The Air doesn't have a LAN plug-socket.
I tried the three LAN ports and the WAN port of the Time Capsule -- all connect the Mini to the TC, but all give me the same transfer speed... of 120 kB/sec.
Of course, the WLAN connection to the TC is much faster. Before the wires I used the 5 GHz band -- and could make a full system Backup over a night. Cabled I would have to spend around 80 days for that ;-)
BTW: A PING-Test looks quite good...
PING 192.168.2.2 (192.168.2.2): 56 data bytes
64 bytes from 192.168.2.2: icmp_seq=0 ttl=255 time=0.194 ms
64 bytes from 192.168.2.2: icmp_seq=1 ttl=255 time=0.236 ms
64 bytes from 192.168.2.2: icmp_seq=2 ttl=255 time=0.172 ms
64 bytes from 192.168.2.2: icmp_seq=3 ttl=255 time=0.229 ms
64 bytes from 192.168.2.2: icmp_seq=4 ttl=255 time=0.232 ms
64 bytes from 192.168.2.2: icmp_seq=5 ttl=255 time=0.226 ms
64 bytes from 192.168.2.2: icmp_seq=6 ttl=255 time=0.230 ms
64 bytes from 192.168.2.2: icmp_seq=7 ttl=255 time=0.227 ms
64 bytes from 192.168.2.2: icmp_seq=8 ttl=255 time=0.268 ms
64 bytes from 192.168.2.2: icmp_seq=9 ttl=255 time=0.227 ms
^C
--- 192.168.2.2 ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.172/0.224/0.268/0.024 ms

Similar Messages

Question about Time Capsule and Airport Express co-existence

I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode. It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN. The network mode in the Airport Express is set to "off". Historically, the Airport Express has worked fine in this wired lan mode. However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today. After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that. The correct / desired diagram would be the Time Capsule and Airport express as peers. I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express. After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

I recently purchased a time capsule and thought I would put my itunes on it as an external drive as my mac book air only has 120gb. However I can not be connected to the internet and the TC at the same time in order to download the files to the TC. Help?

I recently purchased a Time Capsule and put my iTunes library on there so that I wasn't using up my hard drive space. Only 120gb on my mac book air. However when I download songs from iTunes I can not be connected wirelessly to the internet at the same time. Can I hard wire my TC in to my mac so that I can treat the TC as just an external hard drive? Thanks

Initially, you asked if you can hardwire your MBA to the TC. The answer is yes, by using the optional USB Ethernet adapter that Apple provides. However, in order for your MBA to access the TC's internal or USB-attached HDD, it would need to establish a network connection to it. This would be true of any NAS device on an Ethernet network. Therein, lies the problem. Your MBA cannot connect to two networks simultaneously.
One option then, would be to have two separate iTunes Media folders; one on the MBA & the other on the TC. This way, you can download the music to your MBA when connected to the Internet at the AirPort lounge, and then use iTunes Consolidate Library feature to transfer the audio files to the TC's iTunes Media Folder location. A great program to help maintain multiple iTunes Librarys and/or Media Folders, that you may want to consider, is PowerTunes.

Is there any downside to using a reference type library if I use Time Capsule and will do file management only from within Aperture?

Have done a lot of reading to get prepared to convert to Aperture 3 and have this question regarding setting up my library type.
I'm not a professional -just a heavy user hobbyist.
It appears that the major factors in using reference style is to backup the images with Time Capsule and always do moves or deletes from within the Aperture application.
If my architecture matters here's what I have that may be involved in photo management and editing:
iMac (latest 27" high power version with lots of memory)
Internal 2TB HD where the library is stored
External (FireWire) 2TB HD where the images are stored
External (FireWire) 6TB HD backup drive
In the future an iPad for remote work on images (when/if available) and a Mac laptop (for same remote use)
I see major downside issues to letting the library manage my files - such as inaccessibility (or awkward accessibility) to the images for other programs, and performance issues when the library gets large (thousands of images or 100+ gb in size)
The chief complaints I've seen regarding using a reference mode is the broken link issues created if file management is done outside of Aperture (adds, deletes, moves of files) and the inability to use the Vault function for backup.
One feature that I imagine I'd like to have is maximum integration with Final Cut Pro X and that's one area I haven't seen much on and would be interested to hear about if that integration is affected with the choice of managed vs referenced library types. (I like to produce film clips that are combinations of pics and video and want to be set up so that is done in the easiest fashion when working in FCP X)
I'm sure I've not seen all sides of this issue and would like to see some discussion around this question.
Thanks to everyone contributing!
Craig

Goody, Goody, you hit a few of my favorite subjects! Herewith some comments, with the usual caveats - true to the best of my knowledge and experience, others may have different results, YMMV, and I could be wrong.
I run Aperture on two machines:
-- 2007 Mac Pro with 2x2.66 GHz Xeon, 21 GB of RAM, a 5770 GPU, and multiple HD. I have about 11,000 images, taking up 150 GB. (Many are 100 MB TIFF, scanned slides)
-- 2006 Mac Book Pro with 1 2.0 GHz Core Duo, 2 GB of RAM and a 240 GB SSD.
Two very different machines.
-- Aperture Libraries are all the same - Managed or Referenced. If Managed, then the Master image files are inside the Package, if Referenced, they are outside, and you can have any combination you want. Managed is easier, but Referenced is not hard if you are the least bit careful.
-- While the sheer size of an Aperture Library is not a big issue, the location on disk of the different components can have a tremendous impact on performance.
-- Solid State Drives (SSD) read and write faster than regular Hard Disks (HD) and, what is more important, empty HD read and write much faster than full HD.
-- Aperture speed requires a combination of RAM, CPU, graphics processing unit (GPU) speed, and disk speed. The more RAM you have, the less paging you will see. With enough RAM, the next bottle neck is CPU (speed and cores) and GPU speed. But even then you will still have to fetch an image (longer if you pull the full resolution Master, read and rewrite the Version file, and update the Preview and Thumbs.
So what works?
-- RAM, RAM, and more RAM. 4 GB will work, but you will page a bit. 8 GB is much faster. On my old MacPro the sweet spot was about 16 GB of RAM.
-- Keep your Library on your fastest (usually internal) drive. Keep that disk as unloaded as possible. How do you keep it unloaded? Either buy BIG, 1 TB+ or move your Masters off onto another disk. The good news here is that as Master files are written only once and never rewritten, speed of this disk, as opposed to the disk that holds the Library, is not important. There is a one second pause as the Master is read into memory and, if you have enough RAM, that is it - the Master will never be paged out. If, on the other hand, you do not have enough RAM, and you do a lot of adjusting at full resolution, then the speed of the disk that holds your Masters will become very important due to paging.
-- I found that I picked up a tiny bit of speed by keeping the Masters on a dedicated disk. Thus, in your configuration, if you can dedicate that 2 TB FW HD to your Masters, you should see very nice performance.
Final notes on backups and archives:
-- One conventional wisdom is that you should make an archive copy of every image file before or as you load them into your system. (Aperture in this case.) This archive is then never touched or deleted.
-- An alternative approach is that you do not keep such an archive, but only the images that you have in your Aperture Library. And when you delete from the Library, you no longer keep a copy anywhere.
I do the following:
-- Card to Aperture. Card is then kept at least 24 hours until all of my backups have run. (I use three - Time Machine, Clone, and off site.)
-- I do not keep archive copies. If I decide to delete a file, my only recourse is to recover it from Time Machine during the six month cycle of my Time Machine backups. Thereafter, it is lost.
There are merits to both approaches.
Hope this is clear, correct, and responsive to your needs.
DiploStrat

Dual Band Network: Time Capsule (N only) and Linksys (B/G) Works *Long*

Ok, so this was more tedious than I thought it would be, but things actually seem to be working at this point.
Goal: Create a Dual Band network with Time Capsule (N only) and a Linksys WRTSL54GS (B/G)
Time Capsule: 1000BaseT wired, and 802.11N 5Ghz only wireless
Linksys: 100BaseT wired, and 802.11G 2.4Ghz wireless
Airport Utility 5.3.1
Time Capsule v. 7.3
I set Time Capsule up first, following the step by step directions for "Create a wireless network"
802.11N only, 5Ghz
WPA2 Personal
DHCP 192.168.1.1 (kinda important)
This worked fine-tested on a C2D iMac, both thru ethernet and wirelessly thru N. Time Machine backed up fine.
Now the tricky part, configuring the Linksys.( I just want to mention I had to reset this thing completely about 10 times to get it to work, using a miniscrewdriver)
Starting with a freshly reset Linksys, I connected from my MacBook ethernet port to one of the Linksys ethernet ports (Not the WAN)
I disabled Airport
I logged in to 192.168.1.1 using blank for login, admin for password (default for Linksys)
I did the following:
1) Confirmed Internet Connection Type was "Automatic Configuration-DHCP"
2) Changed Network Setup to "DHCP Server-DISABLED"
3) Turned off the Firewall settings in Security (not sure if this is necessary)
4) Changed the Operating Mode from "GATEWAY" to "ROUTER"
5)Changed the SSID to "LinksysG_ONLY" or something like that
After each one of these steps, I had to save the configuration, thru the Linksys browser interface-which blows.
6) Finally, I changed the Local IP Address of the Linksys from 192.168.1.1 to 10.0.1.251 (thanks to Henry B. for that)
7) And....I no longer had access to the Linksys at all! This stumped me for a while, until...
8) I checked my Ethernet settings (in System Preferences/Network): 192.168.1.1 was set as default router address. But my Router (at least for configuration purposes) was now 10.0.1.251, so it could no longer find it.
9) So I added a new Ethernet port (using the "+" sign), called it Ethernet-Linksys. Set it to Manual. Put in an IP of 10.0.1.250, and a Router IP of 10.0.1.251.
10) I got access to the Linksys setup page again! (Note: I'm sure there is an easier way to do this, but this is how I got mine to work )
11) I set up WPA security again, set it to an unused channel (2 in my case), mixed b/g network.
12) Finally, I moved the ethernet cable from my MacBook directly to one of the ethernet ports on the Time Capsule. I did NOT hook up the other end to the WAN on the Linksys (which for some reason I had done 100 times before) I left it in one of the 4 ethernet ports on the Linksys. Repeat, the WAN (ethernet) port remains empty.
13) I then turned Airport back on the MacBook, connected to "LinksysG_ONLY", and...I was online. And everything seems to work.

Hi kjk et al,
I've been searching the boards for something like what you have described in such nice detail. Before Time Capsule, I used a Netgear g router connected to the cable modem and an older Apple base station connected to the Netgear as a bridge. I removed the Netgear and set up my Time Capsule as the primary. The newer computers in my network can access the Time Capsule, but the old Dell with a 802.11g wireless card cannot. I don't remember seeing where I could access TC to change a setting of "N only" or b/g, but I am guessing that it is running N.
I tried to follow the steps you used for Linksys. The pre-step 1 thing, resetting it "10 times to get it to work" - how do you know when it is really reset? With Netgear plugged into electricity, I stuck a paper clip into the hole labeled on the diagram as "restore factory settings" and watched the color of the IO icon change from green to amber to green. I did it again for good measure.
I plugged ethernet from PowerBook G4 into Netgear not-WAN ethernet ports (like your MacBook to Linksys). I disabled Airport. Using Safari, I logged into 192.168.0.1 and got to the Netgear SmartWizard configuration assistant. It says, "No Internet Connection Detected. Please check the connections to the Internet WAN port and cable/DSL modem" - so I looked at your instructions but see no mention of connecting the router to the modem.
Trying to follow your numbered steps...
1. In SysPrefs: Network, Location showed Automatic, Configure showed Using DHCP.
2. I don't see an option in Network to "DHCP Server-DISABLED", but I can choose Configure: OFF. I clicked Apply but browser still gives same message.
I don't know how to continue the steps.

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!

You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

igonneau wrote:
Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
You can, but how are you going to back up those other files? When (not if) your Time Capsule fails, you risk losing them. See #Q3 in Using Time Machine with a Time Capsule for details.
Then can i access these files only on the time capsule without connecting it?
Not sure what you mean. You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk.

Can I move my mmorpg game over to the time capsule and play it from there?

I have a MacBook Pro with a 256 SSD. I play World of Warcraft and it is taking up a lot of room on my macbook. I was wondering if I would be able to move the game folder over to the airport time capsule and play it from there. Or would if not work cause the time capsule isn't fast enough? The apple guys on my base don't know enough to answer my question and there is no apple store here on the island I am stationed on.

If you do not have enough space on the SSD, do not move the gamefolder to the TimeCapsule: this is much to slow; instead move something else there or use an external HDD or SSD.

My time capsule connotes only with ethernet and not wireless why?

my time capsule connotes only with ethernet and not wireless why?

Firstly, try a factory reset. This can often iron out problems like this.
Also, what generation is your TC? What version of AirPort Utility are you using?

Would like my macbook pro to only connect to time capsule and not to airport express that is extending network. Is there a way to do this?

I have a network set up with a main time capsule and airport express. The airport express is configured to extend network. While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster. Any way to do this?

You are extending the 2.4ghz.. as that is the only way you can connect iphones.
But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

HT3728 Why does time capsule every day or so stop backing up? Wifi still seems to work. Time capsule is only a few weeks old and is connected via Ethernet to the router and iMac.

Why does time capsule go missing from the network. The green light is lit at all times. I am unable to use the software the only thing I can do is power cycle time capsule, by unplugging and plugging the mains back in.
My time capsule is only a few weeks old, any ideas?
I am new to apple products very impressed with iPhone 5, I pad, iMac. Really not sure about time capsule!
Thanks

An external drive is much more reliable.. the issue has to do with network connection and loss of something.. although I am sorry I cannot tell you exactly what. The computer is still connected, still works on internet but has actually lost the hard disk.. lost and cannot find it without a restart.
If you want to try a few changes it can help.
1. If you are connected by ethernet make sure wireless is off in the imac.. having only one network connection is better than two.
2. Redo the TC setup with all short names.. no spaces.. pure alphanumeric. Apple has these long names with spaces and characters like apostrophe by default but they are not a help.
3. If the TC is the main router then reduce the dhcp lease time.. make it 20min.. that keeps everything refreshed and up to date.
None of those fix it but they may help stretch out the interval.

HT1178 reset my time capsule and connect it directly to imac only for back up

I want to reset my time capsule and start a new complte back up ..How to reset it and use it directly connected to may imac?

Your little comment in the profile.. it used to work before Mavericks.. might be better to fix it and use it still as part of your network. The problem is the TC is a purely network device.. It is not at all easy to use stand alone. You cannot connect directly to it by USB. It really has to be part of the network.
I have used them plugged in by ethernet to a computer that connected to the internet by wireless. That is messy to setup but works. I will need some info to do it.
How does the iMac connect to the network.. and what IP does it get??
From that I can give you setup but with due warning, this may still have network issues as those bugs are in Mavericks. And you could save yourself the effort and just try to get it working as part of the existing network.
OR.. IMHO much better solution in this case. For desktop type computer like iMac.. plug in a USB drive.. Or FW800 or even thunderbolt if you have need for real speed. Thunderbolt>USB3>FW800>USB2. Price wise.. USB3 is now same price as USB2 so that is the best choice if your Mac has USB3 ports. Thunderbolt is still very expensive. FW800 is better than USB2 but is a dead duck.. Nothing you buy will be useful as the port is being phased out.
But even USB2 will work faster, and be more reliable than a TC.
My other suggestion then is to use CCC or SuperDuper and keep Time Machine as a secondary backup for incrementals. You can produce easily a fully bootable backup drive using CCC. Superduper I heard had issues but that might be fixed now. A bootable backup means if you have a disk failure simply boot the computer from the backup. It is hugely superior method. TM can also continue to be used as it works well for incrementals and restoring applications if that becomes necessary.
Just indicate what you want and we can suggest a way forward or give details on the fix with Time Capsule.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

Time Capsule and only 120 kB/sec over ethernet?

Similar Messages

Maybe you are looking for