Time Capsule and Tiger with wired G5 and wireless PowerBook

Do I want to create a new wireless network with TC as new base station or just add it to my existing network? Are there performance differences? I currently have the phone line connected to my wireless modem (2Wire812), then the modem connected to the internet WAN port on TC, G5 via ethernet to a ethernet port on TC. Everything is working and I have internet access from both the G5 and PowerBook, just wondering if this is the best wiring setup.
Second question ... I will be using Backup to back up files. Where do I find TC to back up to? I don't see it in the destinations list. And for that matter, where do I find TC in general in the finder?
Any help would be appreciated.
Keith

To connect to the TC, you'll also see it under shared, or go to network from the finder. You can open it up just like an external hard drive.
You can also simply plug in an ethernet cable to the back of the TC, and then to your PowerBook for direct link. Apple recommends this for the first backup, since it's faster, unless you are on just an 802.11n network (not g, or earlier). I just setup a dual-band network so my TC and MacBook can talk to each other at 802.11n.

Similar Messages

  • Time Capsule Connectivity Problem with Airport Utility and Mavericks

    I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

    When you say.....
    I cannot get it to work with AirPort Utility....
    What does not work?  Can you open up AirPort Utility and  take us through the steps? What happens after each step?

  • Time capsule wifi connectivity with iPad, iPhone, and other?

    I just purshaced a Time Capsule, and it is up and running. I can connect my Macbook Air wirelessly, but I am not able to connect with my Iphone neither Ipad. What would the problem be?

    Same as what i just posted here. https://discussions.apple.com/thread/4843683?tstart=0
    I would suggest factory reset the TC if the above doesn't work and just try again.. the idevices can be more difficult to get running.

  • Can I use a Time Capsule on a hard wired iMac and get wireless to other devices?

    I have a 6 year old iMac that does not have an airport extreme card.  I have it connected to a cable modem ARRIS model TM502G which is also the VOIP for my telephone.  My question is, if I buy a Time Capsule, will I be able to have wi-fi for other devices like an iPad or iPhone even though my computer is not wi-fi?  If so, can you describe the order in which to hook up the Time Capsule to the existing modem and computer.  Thanks so much.

    That is not the correct approach.. but you can do what you want.
    Plug the TC into the cable modem.. Turn both off and restart the modem and the TC.. if there is a battery backup in the modem you may need to disconnect the coax cable in the back of the unit or drop the battery out.
    Plug ethernet from the old mac into the TC.. use the wifi for the other devices.
    Trying to route through the mac will be a pain.
    A TC is not necessary for this.. if you don't want a backup disk.. you can use AEBS or any wireless router.

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

  • I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time.  However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

    The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
    My new Mac Book Pro does not have home vault open.  But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available.  Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop? 
    When I go into the time capsule - it shows me NOTHING as being in the backup datas.  So, I don't know where to begin to delete all the old data off the
    time Capsule and start with a completely empty machine. 

    Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
    Here is how to do this:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Disks icon at the top of the AirPort Utility window
    Click the Disks tab below the icons
    Click Erase
    The "Quick Erase" option will only take a moment or two
    Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
    Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

  • I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
    But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. 

  • I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

    I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8  Can't seem to download the upgraded software.  Can anyone help?

    Please review the System Requirements for the Time Capsule.
    http://www.apple.com/airport-time-capsule/specs/
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

  • HT1178 I have set up Time Capsule to use with Time Machine.  When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time.  In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

    I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

    Your pro doesn't matter.. I presume it is happily working.
    Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
    Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
    You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
    There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
    This is the most relevant I think. http://pondini.org/TM/B6.html
    But look at the whole section B setup problems.
    http://pondini.org/TM/Troubleshooting.html
    If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
    Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
    See if you can get Pondini to respond.. !!

  • My time capsule connotes only with ethernet and not wireless why?

    my time capsule connotes only with ethernet and not wireless why?

    Firstly, try a factory reset. This can often iron out problems like this.
    Also, what generation is your TC? What version of AirPort Utility are you using?

  • Can i use time capsule for back up my movies and watching them with my bravia tv

    can i use time capsule for back up my movies and watching them with my bravia tv.
    i mean can i use this for external hard disk drive to back up my movies and watching them with tv that has a lan port or wi-fi technology.

    Only if the TV is a media player.. the TC is dumb as a board router with a hard disk.. there is no DLNA which I suspect the TV requires.. you can get a player like the WDLive and it will play movie files from the TC to the TV.. remember the TC is nothing but a file store.. no servers .. no nothing.

  • I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

    I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

    renatocremonese wrote:
    I want to use it for backing up my Mac.
    It's good for that . . . 
    But also I don't keep all my stuff in my Mac.
    But not for that. 
    This older and not day-by-day usage files I want to store in the time machine.
    You can do that (see below), but how are you going to back them up?   If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
    Is it possible to split TC in two partitions.
    No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space.  See #Q3 in Using Time Machine with a Time Capsule.
    But you still won't have backups of the stuff you put there.
    You don't say what kind of Mac you have.  If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
    However, it sounds like you may have a laptop, where that's not going to be convenient.  In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
    To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
    Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
    You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

  • I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

    I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

    You need to use the airport utility on a computer.
    If you use v6 utility it is fairly easy and straight forward.
    The trick is to place the old TC in the same room as the new one.
    Do a full factory reset and then you can just go through the utility to extend wireless network.
    I did one post with all the pictures.
    https://discussions.apple.com/message/24161378#24161378
    If you have issues just ask.
    Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
    You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
    This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
    Tell us if you mean roaming not wireless extend.

  • Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

    Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • Where are my photos?  just tried to access time capsule after my first back up and am unable to open iphoto to verify they were backed up.

    where are my photos?  just tried to access time capsule after my first back up and am unable to open iphoto to verify they were backed up.

    You can't open your backups directly with apps.
    But you can see some types of files in your backups.  If you're still on Snow Leopard (or Lion with iPhoto '09 or earlier), see the gray box at the end of Time Machine - Frequently Asked Question #15.
    If you're on Lion with iPhoto '11, you can use the Finder to see the iPhoto library, per the beginning of that same link.  All you can see there is the library and size.

Maybe you are looking for

  • Error during System copy of SCM system

    *Hi We are performing system copy of SCM system. The Java was not at all running in the system now while performinfg system copy we are facing following errror.* ERROR 2009-10-23 12:05:39.123 CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_12-x64\bin\

  • Iweb problems

    I just got my mac a couple of months ago to edit on FCE. I just discovered iweb last week. It's easy to use but I am unsure of the program. I created 1 page with a video embedded in it. It looks great on my mac but not on my PC. The text has a gray b

  • JScrollPane is not appeared.

    Hi, I want to use JScrollPane. However in my program scrollbar is not appeared. What is wrong? Thanks. import java.awt.*; import java.awt.event.*; import javax.swing.*; public class ImageViewFrame extends JFrame { public static void main(String[] arg

  • Openning a browser window/ send email

    Hi, I have a java app running as a rich client plugged into the Eclipse framework. I would like to be able to email the log files to a help desk. I want this to occur in two cases. 1) When a fatal error occurs (we have an exception catch block handli

  • Help with loading movies

    i have a problem if anyone can help.. please take a look at my website. www.doubleasmetalworks.com under the our products button, i have 3 different movies. copper, abstract, and ornaments. when i click on them to load them.. they load, but not with