Time Capsule and Xbox 360

Just got a Time Capsule 2tb, need to hook to my linksys router wrt54gs and be able to stream to Xbox 360 using Connect360 software installed in the system preferences on a mac running Mac OS Server 10.4.11. Help How do i get this done? right now the TC light is just blinking amber.

Hello ShelbyWeiss. Welcome to the Apple Discussions!
How do you have the Time Capsule (TC) configured in your current network? That is, do you have it physically connected to the Linksys router or completely separate? Is the TC configured to join the Linksys' wireless network or to create its own? Is the Linksys the main router connected to the Internet modem or is the TC performing this roll?

Similar Messages

  • Please help: connection issues (ATT, Time Capsule and xbox 360 live)

    I am having near constant issues with my home network, so I am hoping to tap in to the collected knowledge of the internets to help sort things out.
    Main issue: daily/hourly internet disconnection. Now, my 360 wireless adaptor can't even see the network. Ugh. Basically, I am hoping someone could give me the "best" configuragtion (ie settings for network, Time Capsule, 360 and/or wireless adaptor) for my current set-up.
    My set up:
    LinkSys modem from ATT (in bridge mode)-->
    Apple Time Capsule (router) -->
    Mad Catz 360 wireless network adaptor -->
    Xbox 360
    I have spent some time looking through the forums but keep running into conflicting recommendations and nothing I have tried so far seems to have helped. Thanks (in advance) for the help.

    So, you must have somehow reconfigured the 2wire to perform as a simple modem, even though it is a full fledged modem/router combination. I've see the 2wire, but never configured one, so I can't offer a lot of help there.
    Was there a particular reason why you configured the 2wire as a bridge when you could have simply configured the TC as a bridge to work with the 2wire? In other words, the 2wire would do the PPPoE service along with DHCP and NAT.
    Maybe you tried it this way and something didn't work?
    We've seen a number of posts from users who are having issues with the TC doing the PPPoE service. I just wonder if you are not betting off letting the 2wire do what the ISP intended it to do.

  • Time Capsule with Xbox 360 Live

    Hi,
    I just bought a Time Capsule and it works perfectly except that my NAT type on Xbox Live is now set to strict instead of open. It takes forever to join a online game so it's really annoying me.
    This is my setup:
    ---> Modem ---> Wire from Modem to Time Capsule (in WAN port) ---> 1 wire from TC to PC and 1 wire from TC to Xbox 360
    My PC is running on Windows 7 and I'm using AirPort 5.5.3.
    I've tried pretty much all the tutorials I could find online, but unfortunately none of them seem to work. I've set connection sharing to 'share one public IP-address', enables NAT port mapping protocol, added the Xbox Live ports in the Port Mapping Assistant, and my Xbox is using the IP which I set in the mapping assistant.
    Has anybody got an idea what I should change to get my NAT type to open? Thank you in advance.

    Does your ISP allow pppoe connections?
    If so you can setup the 546 in bridge mode.. just use the internal setup wizard, choose bridge, and finish the wizard. Then in TC choose internet tab and for connection type use pppoe and put in your ISP username and password.
    This is perhaps the best method. But it depends on the ISP using pppoe which is common in some places and rare in others. For instance in Australia where I am, all our ISP provide pppoe, and most do pppoa as well. In UK and many places in Europe, they use pppoa, which cannot be bridged to a router. So you must bridge somewhere else or use a different technique of handling the problem.
    The problem with the 546 in router mode, is that it uses cone nat. This starts to get complicated but some games depend on port forwarding of UDP protocol packets. You can indeed setup port forwarding or upnp in the speedtouch to handle this, but it still fails. There are special commands required to allow port forwarding through NAT.
    See this thread.
    http://forums.whirlpool.net.au/forum-replies.cfm?t=1739702
    Although it relates to a different model on a PS3 the basic issue is identical across all the thomson modem products.. and I am very pleased to finally be able to offer a solution. I worked hard with people who actually owned the box to track down the problem and find a solution.

  • How to optimize Time Capsule for Xbox 360

    I just recently bought a new Apple 2TB Time Capsule to replace my router and I've noticed since then, my Xbox 360 has been having problems. My friends will invite me to a party or game and sometimes it says session no longer available and the same thing happens to them when I invite them. Are there some settings I need to enable?disable for my Xbox to function properly on the network? And would I be able to configure these settings for two systems? I sometimes have one of my buddies come over and we'll just camp all night in my basement playing Xbox and he has the same issues as well. And my internet connection is just fine because the Xbox and Capsule are in the same room and we just recently upgraded my internet to a 50mpbs connection from Time Warner Cable since it had good reviews in my area and we couldn't get FiOS in my specific area.

    Is the modem you have a pure cable modem or has TWC supplied you a combined modem router??
    If you are using the TC as your main router, then xbox has issues because it requires a router that conforms to Vista standard upnp. The TC does not.
    Apple don't even use upnp in their routers. So you need to open all the ports manually for the xbox to use. Just look it up.. xbox issues with airport routers will give you hundreds of hits here.
    AirPort Extreme and xbox 360
    Unfortunately using 2x xboxes on one internet connection makes upnp essential.. it will not work without. That means you need a router that is specifically xbox compliant. You can use the TC in bridge to that router.
    That is why it is often easier to use the ISP supplied modem router now, or buy your own if that is allowed. Most of those will be xbox rated, since upnp is universal standard except in Apple world.

  • Time Capsule and Xbox live

    Hello all!
    I coming here because I'm having a real problem getting Time Capsule full set up with my network any help would be much appreciated! Here is my problem.
    I got a 1T Time Capsule yesterday and got it all set up as the main base station for my network, everything is set up fine in terms of my 2 Mac's being backed up with Time Machine and being able to surf the net wirelessly and I have a base station upstairs just to boost the single to the iMac. The problem I am having is I can't connect to xbox live, when I do the xbox test it keeps giving me the error "can't obtain IP address from router or modem". I have tired a few things already with no luck I went in to the DHCP setting and added my xbox MAC address directly to the Time Capsule. Also going into the NAT settings and checking off "Enable default host at" and then entering 35 at the end to match up with what I put on the other screen. I tried the whole unplug for 10 min and re-power everything nothing worked.
    My setup is pretty simple I think, I got the Time Capsule under my TV stand right net to my 360 so I can plug my 360 right into the time capsule. My Time Capsule is about 20-25 feet from my modem and I got my Mac Mini and a iMac hooked up to the network, I also have a Airport express upstairs just to bot the single to the iMac. Both Mac's have up to date snow leopard software 10.6.2 I'm using DSL not cable.
    If anyone can give me any help I would really appreciate it!

    Howdy,
    I can't help on the TC setup, but can only suggest a few things for you to try XBox (360?) to router. You probably have tried these already:
    1. Check the ethernet cable and ethernet port on the router works.
    2. Instead of using the Automatic option on the XBox to get IP settings, enter in the IP, DNS and gateway settings manually;
    3. I have sometimes come across ethernet not switching to the right speed. The Gigabit port on the TC has to auto-sense the 10/100Mb XBox and auto-switch. Can't find anywhere to force the Xbox to connect at 100Mb, rather than auto-detect.
    Are there any router logs to tell what's happening?
    Another way would be the enable internet sharing on your mac, plug the ethernet cable from the xbox to the mac. I've done this with a pc and it works. However, I haven't tried it with the apple kids.
    Obviously one of the draw backs is the the mac has to be up and running. Disable any energy mode on the mac to stop the wlan port from sleeping.
    Good Luck.

  • Time Capsule with Xbox 360

    Fellow Apple Enthusiasts,
    I have a bit of a dilemma in that I live in a house that has my wireless router is far away from my xbox 360. I am trying to get xbox live working on my xbox and have a Time Capsule to do that. Is there any way I can connect my TC to my xbox using an ethernet cord, then have my TC act as a wireless router to my wireless router? I am looking to avoid getting the $60 xbox wireless adapter or lining a 100ft ethernet cord to the wireless base station.
    Thanks

    Is there any way I can connect my TC to my xbox using an ethernet cord, then have my TC act as a wireless router to my wireless router?
    If the other router is another TC or AirPort Extreme or Express, then yes. If not, your other option would be to consider using Powerline adapters. These adapters take advantage of your home's electrical circuit to create a pseudo Ethernet one. You can then place an adapter at the location of each router.

  • XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

    Okay folks, I need your help out there.
    So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
    I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
    Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
    I know it seems confusing, but thats the best i can describe it.
    tthanks all

    Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
    So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
    You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
    OR
    Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
    I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
    This is a good basic post for older xbox.
    https://discussions.apple.com/thread/5385065?tstart=0

  • Getting DSL Modem, TimeCapsule, and XBox 360 to play nice

    I just bought a 1TB Time Capsule and pretty much hooked it up without reading the manual by using what seemed like the defaults. Everything seems to be working fine...I've got internet access, my two MacBooks are backing up using Time Machine...my only issue is that XBox 360, which connects wirelessly, is offline, (i.e., it can't connect to XBox Live.)
    I have AT&T DSL internet. I plugged my TC into the Westell DSL Modem and ran the Airport configuration software. Using the default or recommended options, My TC assumed the settings for the wireless server of my Westell Modem. (I selected the "Bridge" setting when I got to that part.) When I was told to turn off the other wireless device (My Westell modem's wireless), I just logged on to the modem and turned off the wireless.
    Everything worked fine...until I went to get on to XBox Live. It fails the connection test on XBox. (Everything else still works great.)
    What do I need to do to get the XBox back up and running? It appears that my Westell is the router, handing out IP addresses, and my TC is just a wireless bridge to my Westell. Why wouldn't it hand an address to the XBox just like is doing for my two MacBooks?
    I still have my HP Color LaserJet hooked up via ethernet to the Westell.
    Is there a better way to hook all this up?

    Maybe I shouldn't have said I have the "default settings". At each step along the initial configuration path, I read the details for each option, and choose the path that would seem to work best in my environment.
    In my initial post that indicated that I chose the "Bridge" route that you recommended, but my XBox 360 is not getting an IP address from my Westell DSL modem. Yet my 2 MacBooks, 1 MacBook Pro, 2 iPhones and 1 iPod touch all seem to get served IP addresses without a hitch.
    There was a was an option about NAT & Something else after "Bridge" was selected. Is there something about that setting that would allow Mac stuff to access my network, but prevent a Microsoft-rigid device like an XBox 360 from gaining access?

  • Time Capsule and Mac disconnecting frequently while other devices connected

    I have had my Time Capsule and my MacBook (pre-2008 update) for some time now and it seems like once every week my Mac cannot see the Time Capsule and the utility claims that there are no wireless networks in range and it requires a powercycle and a few minutes to reconnect (usually making me re-enter my network since the SSID is not broadcasted due to security reasons where I live; even though I have it set as my only preferred network). My Xbox 360, PS3 and iPod Touch are all connected at this time and generally perform fine. The problem is only with my Mac and my Time Capsule.
    Is the Mac's wireless card faulty or is it something I'm not seeing right away? Any thoughts at all are totally welcome. I have Applecare and live near an Apple store, I'm just not sure which item would be at fault if any.
    Thanks much!

    I have similar issue with Time Capsule and Airport Extreme. They both worked fine until about 2 weeks ago, now they show green but do not show on the Airport Utility. If I unplug and replug the TC it works (50%) of the time, but the remote speakers on the Airport Extreme do not. I have done a hard reset on Both .. same results.

  • Can I use Time Capsule and LaCie at the same time?

    Can I use Time Capsule and LaCie at the same time?

    stephaniefromarlington wrote:
    Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness.  Whether or not we get to the bottom of this, I am very, very grateful to you. 
    We will get to the bottom of it, and you're quite welcome.  Don't feel you ought to know all this stuff -- none of us were born with it!
    By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
    1)  Estimated size of full backup:  205.94 GB
    2)  My LaCie has available:  11.04 GB of 359.95 GB
    That's part of the problem right there; 360 GB is a bit small to back up 206 GB.  Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
    It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
    But something doesn't quite add up.  Time Machine should have deleted all but your most recent backup, trying to make room for the new one.  But that would mean there should only be a bit less than 206 GB on the disk, not 360.
    A clue may be lurking in your logs.  Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the backup in question, then copy and post all the messages here.

  • What is the maximum distance between a time capsule and an airport express?

    What is the maximum distance between a time capsule and an airport express?

    You can only "extend" the signal one time, so you need to have the AirPort Express located approximately 1/2 to 2/3 of the distance from the Time Capsule to the area that needs more wireless coverage.
    I doubt that this will help much since you have a very challenging setup. Wireless is really only for "same room" or "nearby rooms" around the corner.
    To do this correctly you will need to use an Ethernet cable connection from the Time Capsule to the AirPort Express, which could then be located close to the xBox.
    If it is not possible to run the Ethernet cable, you might look at a pair of Ethernet powerline adapters to send a "psuedo" Ethernet signal over the AC wiring in your home.
    This will not be anywhere near the performance of a regular Ethernet cable, but it will likely be much better than wireless.
    Since Ethernet over powerline (EOP) is somewhat unpredictable, you would want to have a very clear understanding of the store's return policy in case things don't work out as hoped.  Any computer / electronics superstore will have a selection of powerline adapters to choose from.

  • Time Capsule and External HD as Network Attached Storage

    I was wondering if I can
    a. Attached and external hard drive to my Time Capsule and access is wirelessly?
    b. Back up to that external hard drive using Time Machine?
    c. Access that external hard drive and Time Capsule from a remote place off site?
    Thanks

    a. Yes
    b. I think so. But why not just use the TCs hard disk for TM backups?
    c. Apparently so based on these instructions I have found: (Haven't tried it myself)
    In the Finder preferences check the box "show server" to mount to desktop.
    Under Airport Utility:
    Disks - check over wan and check file sharing and write down the ip address
    Under the Finder, use the GO function to find your server ie the hard drive on the TC. In the window provided type afp://ip address then password if applicable. The hard drive should mount and be shown on the desktop.

  • Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • I recently bought a new iMac as well as a wireless time capsule and have it connected how can I use this external drive as the location to store all my files for iTunes, or is this even possible?

    New iMac user here, I recently bought a new iMac and Time capsule and have the whole network up and running now. I have connected another external HD to the time capsule as well and have a total of 3 TB of storage connected wireless to my new iMac. My question is can I use this location as the default location for iTunes?  I doubt I am gonna run out of room considering the iMac has 1 TB of storage already, but I'd prefer to keep my movies and music off the Mac to keep it running smoothly. If this is possibly, I'd like to do this with iPhoto as well. 

    I would advise against placing your iTunes library on a Time Capsule.
    The Time Capsule is designed as a backup device and not for wireless streaming of video.
    Before you do anything more, can I suggest you put into place a reliable, redundant backup strategy.
    Unless you are prepared to risk loss of your iTunes library due to a hard drive failure, I would not put iTunes on the Time Capsule.
    Leave your iTunes library on your iMac until such time as your internal drive is full. Backup to Time Capsule using Time Machine and create a clone of your internal iMac HD to your external drive.
    That's my 2 cents worth. Others may have a different opinion.

  • Time Capsule and time machine with third party router

    Hi,
    This is the first time I use this site.
    I have over three years old Mackbook.
    APP has expired.
    Now I want to know how to set up time capsule in a new environment.
    I moved from Australian and Singapore.
    I was using Time Capsule and Airport Extreme in Australia.
    I have moved to Singapore.
    I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
    Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
    What I did so far is;
    Connected the time capsule to the power point.
    Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
    Apple Utility does not recognise Time Capsule.
    I prefer to use it wirelessly.
    There are only two USB cable ports installed.
    One is used to synchronize iPhone.
    Other is used for a printer.
    but if it is not possible, wired would be OK.
    MacBook 13 inch 2.0 GH Late 2006
    I hope that someone able to give me an answer for this.
    Cheers,
    morepubholidays

    In this case the apple support people reveal a truly poor understanding.
    You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
    IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
    If you already tried this and it didn't work.. try again.. it is the correct approach.
    You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
    So here is how to get the utility into your computer.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
    Select this and update..
    Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
    Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

Maybe you are looking for

  • Can I use a report item as a parameter in an html link.

    I have a report (build using the Query Wizard) that selects and shows data from a database on a seperate system (via a database link). The first column of the report gives an ID Number that I want to use as part of an html link to display the full de

  • IEEE 802.1x Authentication with RADIUS failed

    Hello guys, I've a little strange Situation. If user start his Computer (Windows 7 enterprise) and computer is connected via LAN it works fine. If user start his Computer (Windows 7 enterprise) and computer is connected via WLAN it works also fine. B

  • Problem with Mac Pro Video Playback Stutter

    I just purchased a new Mac Pro (2.66 GHz Quad-Core Intel Xeon with 6GB of Memory) and I'm having an issue with video playback. Whenever I play videos (in Quicktime, online, or in iTunes) the video will freeze briefly every few seconds, causing an ann

  • Maintain box name in  through varaible in Module pool

    HI all, When we create a box on screen then if we give a name to the box it will named that box at the right side (Header part) on the box. My query is it possible to <b>change the box name through varaible</b> or there is any other possibilities to

  • Can we buy apple care warranty after my iphone has been dented?

    And also, is apple care purchased when you purchase your iphone?