Time Capsule as a Wireless Repeater and Backup

Hi there,
I am thinking of purchasing a 1TB Time Capsule in order to wirelessly backup my files for all computers on my network. He is what I currently have on my wireless network:
1 belkin 54g wireless modem router
1 PC laptop
1 MacBook Pro 15 inch
At the same time I would like to by a repeater in order to extend the range of my wireless network. I also have a hard wired ethernet cable running from the belkin wireless router to a bedroom upstairs.
My question therefore is can the time machine drive be plugged in to this ethernet cable upstairs from the belkin and then use that connection to repeat the wireless signal as well as being accessed for backup purposes?
Thanks in advance.

By configure to connect as a wireless client you mean that the time capsule can 'hook onto' or connect to my existing wireless network just like my Mac does...
Yes
...or it could plug into one of the ethernet ports of the back of the belkin router?
That was the 2nd option I mentioned.

Similar Messages

Time Capsule as Additional Wireless Network and Backup

I have just purchased a 500Gb Time Capsule and I am seeking some assistance in setting it up. All this would not be a problem is Apple had just included a modem in their base stations like most other ADSL wireless routers, but hey ho! So my setup then:
I currently have a Belkin N1 Wireless Modem Router connecting me to the internet through my phone socket and also creating a Wireless Network called Apollo. Connecting to Apollo are my MacBook Pro, Vista Laptop, iPod Touch and a HP wireless Printer.
I really rather that the new Time Capsule (TC) act as my wireless router and that my exisiting Belkin just act as 'providing the internet to the TC', however I have several devices plugged into the belkin through ethernet and therefore cannot remove it completely.
So how do I set up the Time Capsule to route the internet to the house as well as acting as a backup for my MacBook through Time Machine?
Thanks

Apple has never made modems for users to connect with broadband internet services. All you have to do is plug the RJ45 cable into the Time Capsule, run through the setup and it will then broadcast a wireless signal for your devices to connect to. You can also plug your other devices into the TC via the RJ45 connector.

Using Time Capsule as a 'wireless' router and backup using Time Machine

I have a question about backup speed on my 1 TB Time Capsule. I purchased a Time Capsule about a year ago and have an imacg5 and two Mac laptops that I setup to use the wireless router capability and as the backup drive for all three computers.
I was experiencing a problem in that the backups from the imacg5 were never completing even though the Time Machine window said it was only backing up several MBs. In order to 'fix' the problem I finally 'erased' all of the backup files on the Time Capsule using Airport Utility. I had also run Disk Utility on all of the drives to verify and fix any problems.
When I initialized the wireless connections and initiated backups I connected to the imacg5 to the Time Capsule with an ethernet connection as well as via Airport and began 'backing up' my laptops, then started by backing up individually, various disks on my imacg5.
The laptops have rather small disks and backed up rather quickly. The imacg5 has hundreds of GB of data spread across several disks. I had decided to 'backup' the disks individually in case that had been the cause of my original problem.
My systems disk, Macintosh HD, backed up about 110 GB at the rate of 8 GBs per hour. I was encouraged.
My next 'data' disk, LaCie 320 #1, backed up about 209 GB at the rate of 2 GBs per hour. I was confused. This 'backup' took several days to complete. Once it completed, Time Machine has run about every hour as expected and completes the backup in about 3 minutes.
I still have two more disks on the imacg5 to backup. Does anyone have any idea what rate I should expect or should I just add the drives and let it take its course?

I say just do it!
When connected via ethernet I turn off the airport connection on the computer. I found that frequently my mom's macbook pro would choose the wireless connection to her Time Capsule rather than the ehternet connection to do the back up. This was slower than via the ethernet.

How do I use Time Capsule as a wireless router and turn my current one into modem only

I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router.
Question #1
How do I use my Time Capsule as a router?
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house. I am assuming this is possible it is I just dont know how to go about doing this myslef without guidance, and the Airport Installer is confusing to me.
Thanks!

Question #1
How do I use my Time Capsule as a router?
Connect an Ethernet cable from one of the LAN <-> ports on your modem/router to the WAN port (circle of dots icon) on the Time Capsule.
Open AirPort Utility and click Continue to follow the guided setup to configure the Time Capsule to "create a wireless network". Select the "Bridge Mode" option when it appears during the setup. (AirPort Utility will normally do this for you)
Question #2
If I do this will I still be able to wirelessly back up to my Time Capsule?
Yes
Question #3
How do I turn off (wireless) or the router function of my modem/ router?
We prefer not to guess at things, but since we do not know the make and model number of your modem/router, and this is an Apple support area, we have little choice.
In general, you would enter the default IP address of the device into your browser to bring up the configuration pages (check your documentatio on the modem/router for this information, or it may be on the back or bottom of the device. An example of a default IP address is something like 192.168.1.254
There will be a wireless settings page that will allow you turn off the wireless function of the device.
If you acquired the modem/router from your service provider, they should be able to tell you how to do this as well, or if you check the manufacturer's website, they will likely have a support area for questions like this.
Question #4
I then want to connect all my wireless devices to my Time Capsule making that
the main WIFi in my house.
You will need to log on to the Time Capsule wireless network from each device and enter the password to connect. Most computers will "remember" the setting so that you do not have to enter the password each time that you connect.

Setting up time capsule with existing wireless router and another time capsule

Hello,
I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
Is this true?? I find it hard to believe this issue hasn;t come up before.
Thanks,
Deborah

Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
Would I need to connect my time capsule directly to the router for first time set up?
If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
Thanks, I really appreciate your help!
Deborah

Setting up Time Capsule as primary wireless router and enabling port forwarding

I am attempting to setup my Time Capsule as the primary router on my wireless network. I have an Actiontec Verizon FIOS router that I am connecting the TC to using ethernet, and I was then going to turn off the wireless function on the Verizon router so that the TC will be the only wireless router. I am not exactly sure how to go about this, and I also have to connect a wireless device to the TC that requires a static IP address and port forwarding enabled so that I can access from my iPhone. I am completely lost on how to do this, any help will be greatly appreciated.

Unless Verizon has made a major change in the last few days, you will not be able to use the TC as the primary router......simply because it is not possible to configure the Verizon router to act as a simple modem......which is what it must do if you want to have the TC act as the primary router on your network.
As LaPastenague has explained. turning off the wireless on the Verizon modem/router will not make it a modem. It will still be a wired modem/router in charge of the network, not allowing the Time Capsule to take over the role of main router for the network.
But, let's assume that I am wrong. Please check with Verizon support and ask them........
1) If it is somehow now possible to configure their modem/router to act as a simple bridge mode modem. If they say that this is not possible (or they will not support this).....
2) Ask them if they can provide you with a simple, bridge mode modem......instead of the modem/router that you have now. A simple modem will have only one Ethernet port, and it will not offer any type of routing or wireless service at all.)

TS1253 I am connected to internet through modem. How can I use Time Capsule as a wreless harddrive and connection to USB printer

Can I use a Time Capsule as a part of my network> I am connected to internet through modem and want to use Time capsule as a wireless harddrive and wireless connection to usb printer. How can I do that? Please help

This type of setup is not officially supported by Apple.
It might be possible to configure the Time Capsule this way, but please take a minute to consider a few things that you may not have thought about, as this is...frankly....the worst possible way that you could configure the Time Capsule.
Wireless backups will take twice as long as normal wireless. Why? The signal must make a "double hop".
Hop "one" would be from your Mac to the wireless router, then the signal must make hop "two" to get back to the Time Capsule.
In addition to doubling the time for backups to occur, this doubles the chances for an error to occur during a backup.
The Ethernet ports are not enabled at all on the Time Capsule when it is configured this way, so backup over much faster Ethernet is not possible.
The USB port is enabled, so assuming that the printer is compatible, it could be configured to connect that way. Keep in mind that only printing is supported. If you have an All-in-One device, advanced functions like scan, copy, maintenenance will not be supported.
So, do you really want to try this? There are no guarantees here that things will work at all.

I set up time capsule using a wireless 4g modem. it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB). Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

I set up a new time capsule on a wireless 4g modem. I started the initial backup. It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)." Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
Thanks,
David

Bunce wrote:
oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
suggestions before I either get this looked at or scrap the HD on it and move forward.?
Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

My 2 TB Time Capsule's memory is full because it will not automatically delete old files as it is supposed to, so it is giving me zero backup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and saves the new?

My 2 TB Time Capsule’s memory is full because it will notautomatically delete old files as it is supposed to, so it is giving me zerobackup of my two computers now. How can this be fixed so my Time Capsule deletes the old data and savesthe new?
Neither my local computer consultant nor I have been ableto change any of the settings in Time Machine to correct this problem. Working with the choices in the TimeMachine, there does not appear that there is any way to change the frequency ofthe backups either, so, after a year has elapsed, the time capsule is full, andmy only choice appears to be to erase all the current data on the Time Capsuleand start over, something that I do not want to at all let alone repeat on anannual basis. My questions are:
What can be done to have my Time Capsule delete old filesas it is supposed to do, so it has memory available to allow my computers toback up?
Is this a software problem that can be fixed online or isdoes this require a mechanical fix of defective hardware?

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

My time capsule worked for several weeks and is now telling me backup disk not available? What to do?

My time capsule worked for several weeks and now is not backing up. Tells me backup disk not available? Any suggestions?

This is a lion bug..
Generally just rebooting the TC will get it back. Otherwise you need to reset the TC and redo its setup.
Tell us a bit more.. but there is as yet no work around or fix for lion.
Certain things help.. but wireless is also a weak link. It will generally work better by ethernet.
Try and get back if it is still bugging you.. I can suggest some other things.. but I do not know of or read a bullet yet.
(Snow and TC firmware 7.5.2 which I run do not have this issue.. so the bug was introduced with Lion and 7.6 firmware)

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro. The TC is almost full. What is the best way/device to increase storage capacity?

Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

My time capsule connotes only with ethernet and not wireless why?

my time capsule connotes only with ethernet and not wireless why?

Firstly, try a factory reset. This can often iron out problems like this.
Also, what generation is your TC? What version of AirPort Utility are you using?

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Can time capsule be connected wirelessly and still use ethernet ports for other devices?

can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
The wireless can be setup in a number of ways.
From your convenience point of view use it in roaming network mode..
you simply give the TC the same Wireless Name as the existing routers SSID.
Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

Time Capsule as a Wireless Repeater and Backup

Similar Messages

Maybe you are looking for