Time Capsule as iTunes HD and Airport Express connected to network

I purchased Time Capsule with the plan of making it my external HD for iTunes, wirelessly, not sure how to set that up.
Also I have Airport Express and would like to link it since TC does not have the connection outlets which allow the sound system to play wirelessly.
Thanks for the help.

Hello,
i know mine is a differen problem but you seem to know what you're talking about! I was using my powerbook s normal but trying to install an internet dongle. the whole thing froze so after a while i forced it to quit by holdng down the on button. when i started it up again i got to the login page and can logn and see my wallpaper but that is it - the finder and desktop never appear. The same happens if i login in as administrator and i don' think there are any other users on my machine. i feel like i have broken the hard-drive or something? i don't know what to do.
can you help?
M

Similar Messages

How to set Time capsule as base station and airport express to join

I have a wireless network using an Airport express. Now I would like to have time capsule to be set up as the base station and just the airport express to join this network, in order to listen wirelessly to music, but keep the speed of the time capsule.
Right now, the ethernet cable is connected to the Airport express. Do I have to switch that to the Time capsule? I tried to do that, but it wasn't able to connect to the internet in this case.... I am lost. Now I have a speedy time capsule, but have the network running on the slow Airport express... Please help!!! And I believe as you guessed already, I am not a smarty, when it comes to networks.
HELP! Please!!

I actually have mine set up this way that you are looking to do. Works well for me. here si what you can try:
Make sure you unplug the Express all together first. It does interfere when trying to set this up. Next setup your TC just like the instruction says (remember no Express). You should just be able to set up your TC, connect to the internet and get going like any other router or like the Airport Extreme. if you set up your TC with your comp and CANNOT access the internet that is your first problem. My suggestion: do a hard reset of the TC if you have already attached it to the Express while also doing a hard reset of the Express - this is to bring them both back to afctory defaults to start fresh. This definitaely helped me.
So once you have your TC up and running and you have internet access thru your TC, you are halfway there. Make sure your TC shows in the left column of the Airport Utility (and dont forget to install the Airport Utility from the disc that comes with teh TC before you do any of this, forgot that). if it shows up in the left column you should also be able to see the Express in that column, both with green lights, if you have set this up correctly. Then plug in the Express. As the above mentioned remember t make sure it is connected to the correct port on that back of the TC. It will remain amber then blink a few times. This is normal. It should be blinking amber when you attempt the setup of the Express. Your airport utility shoul dnow see the addt base station (Express) in the left column. When you click on it and click CONTINUE it will ask you if you want to switch networks. You can do that and lick switch provided you are already connected to the TC and alrady have an internet connection. Once you click switch the TC will disappear from the left column and you will be left only with the Express. This is OK. I am not in fron to fm y comp right now so I am doing this from memory but in setting up the Express you want to add it to your existing network. You will have to choose which network to add it to in a drop down box in one of those steps - just make sure you add it to the one that you named your TC. Then click to the finish and click UPDATE. Let it finish the update - you shoul dsee green light son both the TC and Extreme HARDWARE - not necessarily in the airport utility. Also it is a good idea to to to the menu bar on top where the WiFi icon is and manually select your network in case you get bumped off while the TC is updating itself after you ckicl update - this happened ot me and it wouldnt complete the update and took me forever to figure out it needs internet connection to complete the update screen.
next make sure you RESTART your comp. This I guess will make all changes basically go into effect as you cycle it up. When you are up and running you should see your WiFi connect as your TC and NOT your Express. Also go back into airport utility and see if you ahve both items listed in left column - they too should have a greenlight. If they do you should be set.
I did this because I wanted to steam my iTunes files that I have on my TC to stream to iTunes via my network. The Express part, as you know, is what allows the streaming. So make sure you plug your stereo cable into the Express audio port. Then go to iTunes and on the bottom you will notice a new little drop down box - make sure to select Express so it can wireless stream (in iTunes prefs there is a pref you must turn on also to allow iTunes to see remote speakers.
Ive simplified this a little since I am not at home but this is the gist. In a prefect worl you should be able to easily have this work. I did so I know it does at least work if not anything else. You just have to make sure you get the steps correct and have everyhing plugge din where they should be...
G'luck

Time Capsule and Airport Express as separate network on route acting slow

Wonder if anyone has any thoughts on this...
I have a Time Capsule (current gen) with an Airport Express N (last gen) which I would like to connect to my current router and create a network that is separate from the router's own wireless network. Currently, I've set the TC to work in Bridge Mode (connected to the router - ethernet) and have connected the Airport Express to 'extend the network' - this is also in Bridge Mode as well. However, when I'm away from the TC and in the Airport Express's range, the connection is very slow. Is there something I'm not doing right with the 2 Apple products or is it something with the router? When I'm closer to the TC it works fine, it's just when I'm far away there seems to be an issue!
Thanks in advance!

Wirelessly extending your network will improve your range, but decrease your bandwidth. You should create a roaming network via Ethernet if you can.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. AE no longer works.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. Airport Express no longer connects to my network. I have downloaded Airport Utility 5.6 to try and configure, but with no luck.

TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.

How can I get my time capsule and airport express (as a network extension) working properly together?

Hi,
I bought a time capsule a while back and connected it to my modem, and it seems to be backing up my hard drives but I can't tell if I'm getting my wireless signal from my time capsule or from the modem itself, which used to before I bought the time capsule.
It's bugging me because I'm trying to get my airport express to work as an extension to my network, and airport utility half the time can't pick up the express. I heard that it will only work of the time capsule is working as the base station,and I'm not 100% sure this is the case.
Also, how far can the airport express be from my time capsule for it to be picked up? I tried resetting it which helped to start with, but when I was setting it up to extend my network it just told me that there was an error and to try again, which I did with the same result.
Any advice would be much appreciated!
Cheers

Always do setups with ethernet.. setting up wireless via wireless is like cutting off the branch you are sitting on.
You do not need the TC in the network to do the setup.
Plug it by itself into the computer. Same with AE. But do each separately.
Give the TC a different wireless name.. like TC.. then you will know the TC wireless is separate and different to the main modem router. Simply allow it to be extended.
Plug it back into the main modem.
Now do the AE.. set it to extend the wireless of the TC.
When you do this check the signal level. The airport utility v5 has a full diagnostic of wireless client levels.. do not use v6 utility.. it is useless. The AE is placed somewhere in between the TC and the clients you want to connect.. it has to get decent signal itself to extend wireless. And there is no way we can tell you how far apart.. pick the half way point.. around about and suck and see. If it doesn't work move closer to the TC.
Count the walls the signal is going through.. about 15% signal loss for each one.. if angle is acute 20%.. floors are worse.. they might be 20-25%..

Using apple remote with iTunes 9 and airport express/remote speakers

Hi,
Does anyone know why the apple remote will control the hardware volume for the speakers on my mac, but when playing via the airport express connected to remote speakers why doesn't it control the volume slider in iTunes?
This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
Many thanks

luvs2spooge wrote:
This would be really useful as at present I need the apple remote to control track selection and play/pause, but another remote to control volume.
If it isn't possible now, can Apple please add it to the pile of suggestions for the next version build of iTunes?
edit: it works just fine. check your settings in preferences > devices
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Given wireless range of Time Capsule is 150', will this work? Put DSL modem on phone line in garage, connect ethernet to small office bldg (125') and connect separate ethernet to main house (200'). Time capsule on each end (or Airport Express)? Thx

Given Time Capsule wireless range is 150', will this solution work? In detached garage, connect DSL modem to phone line, then connect ethernet cable to DSL modem and run 125' to small office bldg. Connect separate ethernet cable to DSL modem and run 200' to main house. Put time capsule or Airport Express in each bldg resulting in separate wireless networks in each? Thanks.

This will work very well. You can run a CAT5e (or CAT6) Ethernet cable up to 330 feet...or 100 meters...with virtually no signal loss.
CAT6 costs a bit more, but will handle next generation Ethernet speeds, so if you have a choice, suggest that you opt for CAT6 cabling.

Which is better for range and speed of wifi, time capsule A1254 or the new airport express? I don't need the hard drive aspect of the time capsule. Thanks!

Thanks for any help with this.

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Time capsule can't recognize my airport express

My system 10.5.4 was working fine until my modem died. I replaced the modem and then got my time capsule up and running. When I try to add my airport express (which I use to play music on my stereo) in airport utility I am able to find it only if I do a reset. I go through the series of questions and when everything is supposed to be configured the airport express disappears from the choices on the left of the airport utility. It then says that an error occurred. The express gives off a blinking orange light.
Any help would be appreciated.

Thanks, LePastenague. This re-set was easy. WIth the AE base stations plugged in, I pressed the reset button. Airport Utility walked me through the remaining steps. The process was very easy, and the new router (Airport Time Capsule) is talking to the base stations just as it should.

After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

After I update the Time Capsule firmware to 7.7.2, my three Airport Expresses can no longer connect to the Time Capsule (their orange lights blink and they appear inaccessible in the Airport Utility). When I downgrade, they are able to connect fine.
They are connecting to the Time Capsule over my 5GhZ wireless network.
Any help?

Hi yonajon!
I have some resources for you that may help you resolve this issue. First, here is an article about addressing the blinking amber light:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still having issues, you may need to reconfigure your extended wireless network:
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/ht4259
Take care, and thanks for visiting the Apple Support Communities.
-Braden

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

Time Capsule Wireless Range Extended with AirPort Express

I recently was able to (finally) get my Time Capsule working with my previous 2WIRE modem/router (DSL through ATT). This took hours, but it was worth it! Time Capsule is now my primary router with it "bridged" with the 2WIRE device which is now only a modem. Back up is working fine with our three Apple laptops. However, the wireless signal is weaker than when it was set up with the 2WIRE alone. Our signal strength upstairs was weak making internet connection VERY slow and frustrating. I got an AirPort Express to see if I could use it to boost/extend the wireless signal from the Time Capsule unit. Set up was simple, and it is working great! I have it plugged into a wall outlet between the Time Capsule and the stairs leading upstairs. The wireless signal is now "full" everywhere in the house!

Wired Ethernet from the TC to the AirPort Extreme will result in much better performance. It sounds as if you are not configuring the AirPort Extreme correctly.
Please try the following steps carefully:
Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
Connect the Ethernet cable to the WAN "O" port on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The example below displays an AirPort Express. You will see AirPort Extreme.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Exterme and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
That's it. Pretty simple. Things should be working fine now.

ATT hooked up new u-verse router, now time capsule does not work and airport utility does not see it ?

ATT hooked up the new U-verse router replacing the older 2wire router. Old 2wire router worked fine with Airport +Time Capsule. Now only the amber light flashes. When I try to reconnect with Time Machine it does not find the Time Capsule nor does the airport utility find the Time Capsule. Any help?

Okay, the 3801HGV also doesn't bridge - but there is a workaround. Info on the workaround comes from 'SomeJoe7777' at this link:
http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV- bridge-mode-or-another-AT-amp/td-p/2707013
As for connecting to your TC: the 3801HGV uses a default IP address of 192.168.1.254. It passes out IP addresses to your networked devices, and all of those IP addresses will be 192.168.1.something. The TC uses a default IP address of 10.0.1.1. As your primary router, if the TC's defaults weren't changed, the TC would be handing out addresses to your networked devices that are 10.0.1.something.
If your computer has an IP address of 192.168.1.something, it won't be able to see the TC if the TC's address is 10.0.1.1 (or anything else that's not 192.168.1.something). Hopefully that makes sense!
Go into System Preferences on your Mac, and click the Network icon. Click on Ethernet on the left side, and you'll be able to see what IP address your Mac has been given. My guess is that it has a 192.168.1.something address from the 3801HGV.
If I'm right about the 192.168.1.x address, and that your TC is running with 10.0.1.x addresses, then that's why your Mac can't see your TC. In this case, you need to change the Mac's Ethernet setup to manually set your Mac to a 10.0.1.x address for the TC to see. To do this, go to System Preferences, then Network, then click Ethernet on the left side.
Set the Configure IPv4 dropdown to 'Manually', and it will open up some places for you to fill in information:
IP Address: 10.0.1.15 (or a similar number that won't conflict with your TC's address, but starts with 10.0.1)
Subnet Mask: put in 255.255.255.0
Router: 10.0.1.1 (I'm assuming here that your TC was running with the default IP address; if it was something different, then set Router to whatever IP address your TC was using.)
Then, click the Apply button to make your changes active.
Now, since your Mac's IP address will be in the right "subnet" for your TC, they should be able to see each other. (It's kind of like having to live on the same block as someone to be able to talk with them. In general, if your computers don't have similar addresses, they can't talk to each other. Of course that's simplified greatly, but you probably get the idea...)
Once you've got the IP addresses matched up, you should be able to see your TC. At that point, you can update the TC to work with the 3801HGV. I recommend setting it to bridge mode, but if you can follow SomeJoe7777's advice, go for it!

Horrible playback issues with iTunes 8 and Airport Express over Wifi

Hello folks,
I just upgraded to iTunes 8, and since then, I've been unable to get good playback from my Airport Express with iTunes on my Macbook Pro.
I get between 5-30 seconds of continuous playback, then a hiccup, ad nauseum, ad inifintum. A five minute track usually ends up taking six-seven minutes to complete, and it's like listening to a CD skip.
Both the Macbook Pro and the Airport Express are communicating over 802.11n, and worked well before the upgrade to iTunes 8. On my older, slower, crappier Powerbook which only has 802.11g but runs iTunes 7 (in the same room, about two feet from the other laptop), playback is rock solid.
I've noticed when I monitor the WLAN interface on my MBP with 'netstat -in', I'm seeing a lot of Ierrs, but there's nothing in any of the system logs to indicate a hardware problem (yet, anyway).
Has anyone else had this issue since upgrading? Should I be looking to get my WLAN NIC fixed, or is it an issue with iTunes 8? Are there diagnostic applications I can use to perform hardware confidence tests on the WLAN NIC?
cheers,
Klaus

My AirPort Express optical out has this problem as well, stutter and very bad sound. But only the new 802.11n modell. A older 802.11g model works without a problem.
It worked well until I upgraded to iTunes 8, I bought in in May.
I just had my AirPort Express 802.11n replaced under warranty by Apple but the new unit has the same problem.
Everyone who is using the optical out and have the stutter problem needs to write to Apple about it so they realize it's a problem and fix it.
http://www.apple.com/feedback/airportexpress.html

Time Capsule as DHCP Router and DNS server for larger network - too taxing?

Ok, let me say first that I'm no networking expert, but I have tried to learn a decent amount over the years. I haven't got quite gotten o the level of combing router event logs, though I intend to do that as my next step. My question here though is if my overall network strategy is flawed.
My setup at home is one that may be a bit more extensive than most users have:
Cable modem -> Time Capsule -> Multiple gigabit switches (business grade) -> Wired Cat5e throughout the house and 2 Airport Extremes. I don't know how many total wired and wireless clients I have, but it may be between 30 and 40 (only a few are computers with the rest being game systems, networked DVRs, audio streamers, NAS, etc)
At the moment, the Time Capsule only backs up one machine - a MBP (I have external HDDs connected directly to the desktops). I don't use the TC's HDD for anything else. Also, I have the network configured so that the TC handles DHCP addressing and NAT. The Airport Extremes are in bridge mode.
For the most part, everything works very well. Internet speeds are good, audio streaming works well, no problems with TC backups, etc. The only issue I've run into are dropouts when streaming video content on the network from one device to another (not form the internet). Basically, the stream will pause and then an error will pop up on screen saying that there was a network problem. Now, I know that the specific devices themselves may have issues of their own, but since it's happened on more than one system, I'm wondering if there is a common network culprit- expecting the Time Capsule to handle its duties especially while it is doing a backup.
Here are a few thoughts I have:
1 - From a technical standpoint, I don't know if all client to client network traffic goes through the TC. I was thinking that communication could happen between devices on the same switch without having to go up to the TC and then back down, but maybe I'm wrong. If I am wrong, that certainly is a bottleneck right there. I'm not segregating the video streamers to their own subnet on a new router to isolate the traffic. I'm also not sure if the bottleneck is impacted by static vs dynamic IP addressing. IOW, I don't know if setting the devices up with static IPs would change the flow of traffic to not have to go through the TC (just flow across the switch) or not.
2 - Long ago in a different network setup, I had allowed the wireless access points to assign IPs. However, I found that doing so sometimes created problems accessing some of those devices from a computer or device on a different subnet. As such, I switched over to having the router connected to the modem do all the IP addressing. Maybe this is a bad idea given the temporary nature that some devices will hop on and off the network.
3 - Additionally, in the interests of getting better wireless coverage over the whole house, I switched to using 2 airport extremes configured to use the same SSID (so that devices moving around the house wouldn't need to specifically change networks in order to get better signal). I guess I could let one of those 2 handle IP addressing while the other is in bridge mode (pointing to the primary Extreme vs the TC).
4 - Kind of getting back to the TC as the bottleneck, maybe it shouldn't handle network wide DHCP and NAT duties. If TC backups take network priority, such that other kinds of traffic could hiccup, then I probably need to rethink where the TC should exist in the network. Or, maybe it would be enough to just have the stream sensitive components be on their own subnet.
I know there are potentially multiple flaws in my current strategy, so any suggestions or attempts at correcting my assumptions would be helpful.
Thanks!
Jeff
Message was edited by: Rgbyhkr
Message was edited by: Rgbyhkr

Welcome to the discussions!
1 - Everything goes through the router when it is setup to handle DHCP and NAT
2 - You want your main router, the TC, to handle all DHCP and NAT functions. It will handle up to 250+ connections, so 30-40 devices won't be much of a challenge
3 - Keep both AirPort Extremes in bridge mode to allow the TC to handle the things in #2 above. If you setup an Airport Extreme to give out IP addresses, you'll create a Double NAT issue on your network...which can slow down communications between devices...the thing you are trying to avoid. If you use Xbox live or other interactive services, the online features will not function with a Double NAT on your network.
4 - You want the TC to handle all DHCP and NAT functions as in #2. I assume that you have no single run of CAT5e more than 300 feet.
5 - If you want to create separate sub nets correctly (the AirPorts won't allow you to do this as they are designed for basic home networking), you'll need to look at routers for professional and commercial use, like Cisco.
With as many devices as you have, you may be running out of bandwidth at times. If you only notice the issue during Time Machine backups, and you don't need to backup each hour, take a look at Time Machine Editor to setup backups whenever you like, maybe once a day at 2 AM when things on the network are quiet.
My suggestions are of course opinions. Hopefully you'll receive some other possibly differing views.

Time Capsule as iTunes HD and Airport Express connected to network

Similar Messages

Maybe you are looking for