Time Capsule & ATT Uverse 2Wire WiFi Router Compatibility

I recently made the switch from ATT DSL to ATT Uverse for my internet service. With Uverse comes a 2Wire wifi router. I was told Uverse would be faster. I haven't noticed faster connectivity to web pages, however some web sites now have some hang time before they load. They didn't with the DSL, that I noticed. Just for info my current download speed is 1427 kbps and upload is 942 kbps (speed test server 90 miles out).
To get the 2Wire to work with the TC, I placed the TC in bridge mode. Both devices are coupled with CAT5. Both iMac and iPod Touch use the TC network name to access the net. When I try to log directly into the 2Wire network name it won't allow it. States password is incorrect, but I meticulously enter the correct password. When I disconnect the CAT5, the 2Wire devise disappears as a network choice and the TC stops functioning too.
With the exception of the hang time on some websites & iTunes Store, everything is working (to include wifi printer & Time Machine back-ups). Is there a better way to pair up these to wifi devises?

Hi Bob,
"Do you know what speeds you should be getting?"
I don't, however I do know I am not subscribed to the top tier of service. When I don't experience any hang time, the speed compares to the DSL I had prior.
"assume you have the green light."
Yes, the light is green and the hourly back-ups are performed.
"When the 2wire was originally set up by AT&T, did you use your iMac to enter the password, or was another computer used at the time?"
The iMac was used to enter the password (found on the side of the 2Wire device) and this was performed wirelessly. I then changed the password. When the tech left I was on-line with the 2Wire and the TC was blinking yellow. I called Apple Care and they helped me put the TC in bridge mode, and had me connect it to the 2Wire. During the process I needed to enter the 2Wire password. I kept getting an error message with the password I set and the default password. I then had to call ATT. While on hold I kept attempting to enter the new password and it actually accepted it. I finished pairing the wifi devises.
The WifiTrak app on my iPod shows the signal strength of the two devices. The 2Wire always has a stronger signal strength. My iMac & iPod use the TC network. If I manually choose the 2Wire, it never accepts the password. When I choose these two networks on my iPod in settings, the TC shows the IP Address, Subnet Mask, Router, and DNS. These fields for the 2Wire are all blank.

Similar Messages

  • I have a Time Capsule as my main WiFi router in my home.  I'd like to extend my WiFi service to my guest house located approx 100 feet away. Will the AirPort Express fill this need?  Is the AirPort Extreme a better fit?

    I am using a Time Capsule in conjunction with my IMAC 27" system as my main WiFi router in my home.  I would like to extend my WiFi service to my guest house which is located about 100 feet away.  Can I use the Airport Express to provide this extended range?  Would I be better served to use the Airport Extreme?  Thanks!

    The normal location for an AirPort Express or AirPort Extreme is a point that is about half way between the main router....the Time Capsule in this case.....and the area that needs more wireless coverage.....the guest house.
    I doubt that you will be able to locate an AirPort at this "half way" point, correct?
    Before you buy anything, take a laptop, iPhone, iPad, etc out to the guest house as a test to see if you can log on and get a reliable Internet connection over the wireless.
    If you can, then either an AirPort Express or AirPort Exreme could  be used to provide additional wireless signal coverage in the guest house.
    If you cannot get a reliable connection with the "test" mentionded above, neither AirPort will help since they can only "extend" the quality of signal that they receive. 
    If this is the case, you will need to look at running an Ethernet cable from the Time Capsule out to the guest house to provide the reliable connection that you will need.

  • Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

    I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
    cheers
    jadidev

    Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
    Yes, if you have an Apple router.
    No, if you have a BT router.
    IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

  • Can I use Time Capsule only as a WiFi backup disk w/out having to configure it as my main router?

    I already have an Airport Extreme that works great. Can I use Time Capsule ONLY as a WiFi backup disk w/out having to configure it as my main router with my Internet modem?

    Can I use Time Capsule ONLY as a WiFi backup disk w/out having to configure it as my main router with my Internet modem?
    Yes, you have two options here, each with advantages and disadvantages.
    Option 1...connect the Time Capsule to your AirPort Extreme using an Ethernet cable connection. Turn off the wireless on the Time Capsule since your AirPort Extreme is already providing wireless.
    Advantages...easy to configure, you can backup either over wireless or plug directly into one of the Ethernet ports to backup large files 3-5 times faster than wireless.
    Disadvantages...none, except it requires a wired Ethernet connection to the AirPort Extreme.
    Option 2....configure the Time Capsule as a wireless only hard drive.
    Advantage.....you can locate the Time Capsule anywhere you want as long as it can receive a good wireless signal from the AirPort Extreme.
    Disadvantages....harder to configure, backups will occur only over wireless.

  • Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

    Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
    Neighbour's wireless Router = Time Capsule = My Macbook
    If I can please tell me how to set this up in details please. thanks for your time.
    Message was edited by: Thomas Pink

    You are trying to set up the Time Capsule as a Wireless Router
    and Repeater? - To share an existing wireless network, wireless?
    The AirPort Extreme was capable of repeating (like a transceiver)
    to and from an existing wireless network, to expand upon it; but
    only did this with another AirPort product, such as an Express.
    The Time Capsule and many of its features are outlined here, with more
    information: AirPort + Time Capsule: http://www.apple.com/support/airport/
    You may have to direct your question regarding expanding an existing
    wireless network, to the Discussions section for the specific products.
    Usually, the "extend a network" wireless feature in the software setup
    only applies to the use of a second Apple AirPort-type base station;
    such as the Extreme, Express, etc. The compatibility is between the
    AirPort-like Apple products; but a bridge could be made if an Express
    were attached to the other wireless network via Ethernet cable, then
    the Time Capsule may be able to see it. This would require testing.
    Apple - Support - Discussions - AirPort (+ Time Capsule)
    http://discussions.apple.com/category.jspa?categoryID=140
    Good luck & happy computing!

  • HT201945 How do I use my time capsule on an existing WIFI network?

    How do I use my Time Capsule on an existing WIFI network?

    Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
    It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
    Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
    The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

  • How do i link my time capsule through a virgin media router(netgear))

    Hi i am trying to use. My new time capsule as the main wireless router . I have a virgin media netgear router VMDG280. rebooting the router time capsule and computer still results in a flashing amber light
    Thanks
    Steve

    I have had the same problem but SOLVED IT this evening. 
    If you type in your IP address 192.168.0.1 into your google search line it launches you into your virgin media .  Put in your username (in my case the default was 'admin' as I hadn't changed it and my password for my virgin media account (not the router password).  this took me into the settings page to change my Superhub into a modem only.  NB  - you can change this back at a later date. 
    i then re-booted my virginmedia box and then did a soft reset on the Time Machine and BINGO. 
    I went into the aiport utility on my imac and it asked to create my own home network name and password.  Everything works fine and connects to my new home network name in the wifi settings.  The time capsule was able to see my network and is now backs up.

  • How do I get a 1st generation time capsule to join a wifi network?

    OK, I've searched the groups but no luck.  Here's my situation;
    I'd like to configure a 1st generation time capsule to join a wifi network ideally with a printer attached to the USB.  My set up is an iMac running 10.9.3, Airport Utility 6.3.2 and a 1st Generation TC with the latest firmware (7.6.4).  I'm trying to connect it to an ADSL Wifi Modem/Router.  I know a cabled connection would give better performance but want a wifi only connection as the printer is in a different room.
    I've disabled the network functions (bridge mode) but I can only see wireless options to Create a Wireless Network, Extend a Wireless Network or Off, not to Join.  If I try to extend I get the option to add an SSID, security & passwords but it doesn't seem like parameters to join  -the drop-down doesn't list available networks to join & manually entering the main wifi network and password doesn't work.
    Is my desired config even possible?
    Dave

    Something.....a Mac or PC will need to have a 5.x version of AirPort Utility installed on the computer.
    Perform a factory default reset on the Time Capsule by powering it off for a few minutes. Then, hold in the reset button first and keep holding for an additional 10-12 seconds while you simultaneously plug the power back into the Time Capsule. Release the reset button after the hold period and allow a full minute for  the Time Capsule to restart to a slow, blinking amber light.
    Open up AirPort Utility on the computer, select the Time Capsule and click Manual Setup
    Click the Base Station tab below the row of icons to type in a device name and password that you want to use for the Time Capsule, set Time Zone, etc.
    Click the Wireless tab next to the Base Station tab
    Hold down the option or Alt key while you click on the Wireless Mode setting box
    Select the Join a wireless network setting
    Select the name of the wireless network
    Enter the password for the wireless network
    Verify the password
    Click Update to save the settings
    Note....everything here assumes that the router that provides the wireless network is using WPA2 Personal security, which is the default setting for the Time Capsule.

  • Time Capsule not visible on WiFi network

    Tried to set up a new Time Capsule via the airport utility but it will not identify a Wifi Network to connect to (objective is to enlarge the network, rather than to establish a new network). There is already an older model of time capsule connected to the same router via WiFi to enlarge the network and it works well.
    Is it  really the only solution to connect the time capsule to the router via Cable and establish the connection like that? (That would be exactly what we do not want - another cable) Multiple resets to factory settings did not solve the issue. Anyone there to help? Thanks

    There is already an older model of time capsule connected to the same router via WiFi to enlarge the network and it works well.
    Connected by ethernet or by wireless?? What router is it connected to?
    An apple router can only extend wireless of another apple router and only once.. ie you can have a main base and one repeater.. you cannot repeat twice.
    You can use EOP (homeplug) adapters if ethernet is not suitable.

  • Setting Up Time Capsule as a Second Wireless Router

    Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it using my macbook (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router to expand my neighbor's network. Like repeating (like a transceiver) to and from neighbor's wireless network, to expand upon it.
    Internet = Neighbor's Modem = Neighbor's wireless Router = Time Capsule = My Macbook
    If you can please tell me how to set this up in details on my TC please. thanks for your time.

    802.11g AirPort Extreme Base Station -> 802.11n Time Capsule
    With "mixed" AirPorts, you will need to configure both routers into a Wireless Distribution System (WDS). Your neighbor's AirPort Extreme Base Station (AEBS) will be the main and your Time Capsule (TC) will be the remote base station in this WDS.
    To simplify setup, you should connect your TC directly to the AirPort's LAN port by Ethernet. Once the WDS is configured, you can disconnect the TC and place it at the desired location.
    The following are the basic configuration steps to create a WDS:
    (Note: To facilitate the WDS set up, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
    Main Base Station Setup - AEBS
    o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
    o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
    o Select the main base station, and choose Manual Setup from the Base
    Station menu, or double-click the base station to open the configuration in a separate window.
    o Enter the base station password if necessary. If the base station is using the
    default password of public, you will not be prompted for a password.
    o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
    o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
    o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
    o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
    o Click Update to send the new settings to the base stations in the WDS.
    Remote Base Station Setup - TC
    o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
    o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
    o Select the remote base station, and choose Manual Setup from the Base Station menu.
    o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    o Enter the same network password as the main base station, if necessary.
    o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
    o Click WDS and choose “WDS remote” from the pop-up menu.
    o Enter the AirPort ID of the main base station in the WDS Main field.
    o Click Update to transfer the settings to the base station.
    (ref: Pages 42-46 of "Designing AirPort Networks.)
    802.11n AirPort Extreme Base Station -> 802.11n Time Capsule
    o Open AirPort Utility and select the base station that will connect to the Internet.
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.

  • How to setup apple time capsule with FIOSinternet and VZ router?)

    Hello,
    I have Apple time capsule and the VZ Router MI424WR. I current set up:
    1. VZ router - wireless off, the rest is standard
    2. Time capsule: Wireless on in Bridge mode
    Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
    I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
    Please, is there a good and complete description to solve that issue?
    Thanks in advance
    Moebius

    Go back to your first setup ...
    Verizon router with wireless turned off
    Apple Time Casule with wireless turned on
    Method 1:
    With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
    If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
    Method 2:
    This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.  
    With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule.  You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side.  Now, connection the WAN port to one of the Verizon router LAN ports.  If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
    Method 3:
    This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
    There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
    If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

  • How to improve the speed for backing up files to time capsule via in hose wifi?

    How to improve the speed for backing up files to time capsule via in hose wifi?

    via in hose wifi?
    Use a bigger hose??
    House??
    Need to spell this out a bit more..
    But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

  • Would time capsule be a fast enough router?

    I have a imac desktop running safari and a windows laptop running windows xp(802.11g). My laptop is to slow running off of airport and Im not happy with airport as my only router. I need a router and a external hard drive. Would time capsule be a fast enough router for me?

    Time Capsule is just another Airport Extreme Base station with a hard drive (ok, that's slightly simplistic), so if the laptop can only connect at 'g' speeds, I wouldn't expect any difference from the Time Capsule.
    Do you have an Airport Base Station or are you sharing the Airport connection from your iMac? I'm not sure, but I'd think you'd get slower performance from the latter. If ABS, is the network configured as g-only or b/g compatible?
    Maybe there is something wrong with you laptop configuration.

  • MacBook Pro and Time Capsule after adding new wireless router

    I have a MacBook Pro and Time Capsule (which functions wirelessly to router and computer). I added a new wireless router (netgear, not my idea) and had to change name of wireless network. Now Time Capsule flashes amber and does not show up in Airport Utility.
    Do I have to set up Time Capsule from scratch? If so, if you can aim me to directions I won't have to waste tech support's time.
    My additional question on a similar vein: I also have a Time Capsule (second time capsule) which is plugged into the wireless router using ethernet cable for use with a windows notebook running windows 7 which backs up wirelessly. Do I have to change anything on this Time Capsule (second Time Capsule) as a result of change in name of network (I've already adjusted computer to connect to network)?

    Hi DD,
    If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342).

  • Time capsule not working as wireless router

    I am having trouble with my time capsule working as a wireless router.  It appears in airport utility and the green light is on.  It is backing up my computer which is hardwired with via ethernet.  The network setting is on bridge.  Any thoughts?

    Your first statement and last statement are in conflict.
    I am having trouble with my time capsule working as a wireless router.
    The network setting is on bridge.
    If the TC is set to bridge it cannot work as a router. To be a router the TC must be set to dhcp + nat.
    If you already have a router, then the TC should be in bridge. That is correct. If the modem is pure modem then the TC is in the wrong mode to work.
    You should have the wireless set to create a wireless network..
    Use all short names, no spaces and pure alphanumeric. Set a different name for 2.4ghz and 5ghz until you sort the problem.. if it is just connection to wireless issue.
    Please clarify what is the problem.

Maybe you are looking for