Time Capsule backup over LAN

Hello,
is it possible to Time Capsule backup a non wifi Mac over LAN?

of course. you can back up over an ethernet connection.

Similar Messages

  • TIME CAPSULE BACKUP OVER INTERNET/VPN - POSSIBLE?

    I would like to have my Macbook Pro backup to my Time Capsule in my office when I'm traveling.
    We currently run an Apple OSX Server on our office network, and I have VPN access to the network. However I can't figure out how to mount the Time Capsule and run it (I can't in fact figure out how to access any of the computers on this network, except for the server which I can access via ARD).
    Any help would be appreciated.

    i too am looking for a backup solution for when i am away from my lan

  • Time Capsule Backup over ethernet for PC

    Hi,
    I am planning to buy a Time Capsule.
    I have a macbook and a PC with Windows Vista.
    My PC does not have the Wireless option, so i have to connect it to the Time capsule through ethernet to use it as a router.
    I have 300 GB of files on my PC, how do i transfer this to the time capsule hard drive.........on the website it says Time capsule is a "wireless shared hard drive".....what does this mean......does it mean i cannot transfer my 300GB files from my PC to the Time capsule hard drive through the ethernet cable.

    You can use Ethernet to transfer files and acess the Internet through the time capsule.

  • Restoring an existing Time Capsule backup to a new HD

    The hard drive on my 6 month old MacBook Pro failed inexplicably several days ago. After wasting half a day trying to repair the disk, I caved in and made an appointment at the dreaded "Genius" Bar.
    They verified my suspicions; complete failure. They kept the laptop, ordered a new drive and two days later informed me it was fixed. I sat down and connected it to my Time Capsule with an ethernet cable. When I turned it on, it played through that now insufferable multicultural "welcome"-in-twenty-languages jam and I followed Apple's instructions +Restoring an existing Time Capsule backup to a new Mac+:
    http://support.apple.com/kb/HT1177?viewlocale=en_US
    My favorite step is #12: +Your Mac will check the Time Machine backup for a period of time.+ When that period was clearly going to be a while, I went on a run, came back 40 minutes later and...it had returned me to the initial post-willkommen-bienvenido-etc. screen where I get to choose a language. Okay, my bad for leaving it unattended. I started over at #2, and this time it only took about half an hour. It showed the folders on the Time Capsule, I selected all of them, and clicked Transfer.
    Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
    Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
    Any advice would be much appreciated, thanks!

    Amenity wrote:
    Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
    Connect to your Time Capsule via Ethernet if at all possible.
    After booting from your Leopard Install disc and selecting Utilities, select +Disk Utility+ and see if it can find the +sparse bundle+ containing your backups on your Time Capsule. You may have to join the network, etc., via the Airport icon in the menubar. If you can get the sparse bundle to appear in Disk Utility's sidebar, select it and do a +*Repair Disk+* (not permissions) on it.
    Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
    That's fairly likely; it happens a lot, probably because most folks have upgraded and installing SL has become a habit. But it shouldn't matter -- as long as you're using your Leopard Install disc, it should work fine. Once the restore actually starts, the first thing that happens is your internal HD is erased, and everything is restored from your backups.
    It's also possible that whatever was going wrong on your internal HD corrupted something critical in your installation of OSX, and the corrupted stuff was backed-up, and that's what's giving TM a problem. If nothing else seems to help, try restoring from a previous backup.

  • Can't Connect to My Time Capsule Backups, Please Help!!!

    I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
    I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
    I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
    I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
    Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
    -Amir

    Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
    What I am doing is this:
    (1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
    (2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
    (3) Do a fresh install of Snow Leopard.
    (4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
    Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

  • Problems with Full restore using Time Capsule backup???

    For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
    Here's where things get messy...
    - I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
    - After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
    - The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
    This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
    Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

    I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
    A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
    Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
    Hope this helps!

  • Time Machine issues (16030) sparsebundle" is already in use for Time Capsule backup

    Time Machine issues (16030) sparsebundle” is already in use for Time Capsule backup process.  Just started happeing been using it for over two years.

    First, restart the computer and the Time Capsule. In most of the cases, this solve the problem.
    If it doesn't work, see > http://pondini.org/TM/C12.html

  • New Macbook does not recognize Time Capsule backup from old macbook

    I just purchased a late 2013 13" macbook pro. I have a mid 2009 macbook pro running Mavericks. The new macbook will not recognize the time capsule backup from my old macbook. I am trying to migrate all data over, but the new mac does not ever acknowledge the external drive that contains the backup. I've tried two different external drives with the same result each time. Both computers are running Mavericks.

    Do you see the drive in Disk Utility?
    If yes, run Repair Permissions then restart the drive.
    1. Open Disk Utility in your Applications/Utility folder.
    2. Click on the First Aid tab and select Repair Permissions
    3. Click on the icon for your boot volume.
    4. Click the repair permissions button.
    In System Preferences > Time Machine can you select the old Time Machine with Select Disk?

  • Time Capsule Backup Problem (frist time)

    Hi,
    Background information,
    I am using a 32 day old 2TB Time Capsule, The Computer I am using is a white Macbook early 2009 - 120 gb HD and i have USED 80 out of 120 -  , it is connected via wifi to a ADSL +2. The Time Capsule I am running is connected directly via the modern to the TC using a ethernet cable. I have the latest version if OS X Lion and the latest update and firmware of TC. I am backing up directly to the TC’s drive.
    The Problem,
    A couple of days ago i started to do my first backup of my Macbook, I started at 8 am in the mourning in which it took till 10pm at night using wifi, i am un-bale to use ethernet cable... However this backup did not fully complete and at around 4pm that same day when I was trying to backup It said it had only "5 seconds left" until it started to increase the amount of data that the TC had to backup. It got to 10pm and fail the first backup with an error message, which I do no have, I think it is something to do with the disk being disconnected. So I tried again the next day, when it started the gage said it only had to backup initially 250mb, which i would assume this means it's completed it's first backup, as the day progressed it still was backing up, and was presenting the same issues as before, that is it said it "only had 5 seconds left", however once again it began showing that it had to backup more data, at the end of the day it had to back up 6.5 gb which it did but hadn't fully finished.
    A quick side note: I have been able to successfully make a backup on a early 2010 iMac.

    The first Time Machine backup of a Mac will always involve transferring a lot of data.  Over Wi-Fi that means it will take a long time.  I'm not sure why you say you're unable to use an Ethernet cable, but I recommend that you use one for that first backup.  Connect it just before you go to bed, turn off Wi-Fi to assure that it's really using the Ethernet connection, and start the backup.  It should be complete by the time you get up.  At that point you can disconnect the Ethernet cable, turn Wi-Fi back on, and do all future Time Machine backups over Wi-Fi.

  • Will time capsule backup file on pc partion

    will time capsule backup files on pc partion

    Not using Time Machine, which will only backup a Mac. 
    You could manually copy the files over to the Time Capsule disk....or better yet, use a PC application like Genie Timeline Pro to set this up automatically.
    Genie Timeline Professional - Genie9

  • My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Help!

    My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Can anybody help?

    Sorry, you have lost me since it appears that you have two completely separate issues here.
    All that I can suggest is you start over and try to set up the Time Capsule again first...and then, once that is done and the Time Capsule is working correctly on the network....then, try to troubleshoot the separate Time Machine issue.
    If you decide that you want to do this, we'll need some basic information:
    Make and model number of your modem?
    You are using OS X Mavericks (10.9.3), correct?

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • Use external drive for Time Capsule backups AND file storage?

    I have an external drive formatted by my MBP.  I'm using it to store my iTunes music library and iPhoto pics.  Can I use the drive for Time Capsule backups as well?

    Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

  • Time Capsule backup for multiple users

    I have my iMac setup so that each member of my family has their own account. I am the administrator. When I run a time capsule backup is it backing up their files as well or do I need to create a backup for their accounts.
    If I create individual backups for their accounts will it backup the shared files like the applications or just files specific to their accounts? Is this something I need to control by selecting what files to exclude in the preferences
    Time capsule seems great for simple backups but concerns me if I ever have a HD crash. It seems very difficult to restore a backup to a new mac if I ever have to do that. Does anyone else have this concern? I am considering buying another external drive and use SuperDuper to create full bootable backups at least once every 6 months or so.
    Thanks,
    Gil

    It is much harder to check what Time Machine has backed up.. you can assume that everything currently needed to reproduce the same setup on another computer is there.
    To double check you must spend a bit of time understanding both how Time Machine works and how to restore from it.
    Read up a bit from Pondini's excellent KnowledgeBase of articles.
    http://pondini.org/TM/FAQ.html
    Q7-9 are highly relevant.
    Also go back to the main page and read the main articles on how TM works.
    I must also say at the moment, on Yosemite in particular, I would not fully trust Time Machine.
    I encourage people to make a bootable clone using Carbon Copy Cloner for example to a USB drive. You do not need to do it continually but the clone makes for a much easier return to normal.. since you can simply change boot disks. It costs $40 and is excellent value.. there are others you can buy.. and I am not connected to CCC in any way.. other than I use it and been amazed at what a great piece of software it is.

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Maybe you are looking for