Time capsule backup: .sparsebundle cannot be accessed error -1;

This the second time a month that this problem is occurring. OS is Lion. I've gone to utiliies and used Onyx to clean, but can't get my backup to work properly tonight. Also on wireless a laptop running OS Lion - no error messages on that system. Intermitant use by ipads and iphones. Frustrating.

That is lion in a nutshell.. frustrating.
Download and use the 5.6 utility.. the one in Lion is a toy.
There is no disk page in 6.. which makes it utterly useless.
Open your newly installed 5.6 utility..
Go to manual setup.
Go to the disk page of the TC.
Click on disconnect all users.
Lion should now be able to backup.. if not there could be some other issues.
See C17
http://pondini.org/TM/Troubleshooting.html

Similar Messages

Time Capsule Backup Disk Cannot Be Found

Hello,
I have a fairly new iMac (about 3 months old) running Lion OSX 10.7.4. This is my first Mac Computer. I have it setup wirelessly to a time capsule and had time machine backup. All was running fine until today when I noticed my last successful backup was June 18th. Ive spent several hour reading in apple support communities and other websites and I can't figure out what happened. I have kept all my software up to date.
All my other Apple devices are working fine on the same network: 2 Airport Expresses for Airplay, iPad, iPhone, iMac. . . I just can't get time machine to backup.
My error message is "Backup Disk Cannot be Found"
HELP!

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

OS 10.8.2 - time capsule backup disk cannot be found

I updated to OSX 10.8.2 last night and now my Time Capsule cannot be found even though my wireless connection to the Time Capsule is fine and the Time Capsule appears in the Finder.
Anyone havng similar issues?

I've had this problem a few times with two MacBooks on OS X 10.8.2. I had to restart the Time Capsule the first few times to get the backup to execute. Last time it happened, I ejected the time capsule from the finder window. It didn't disappear, but seemed to refresh. I activated the time capsule "back up now" and it worked fine. Might give one of these a try.

Contacts is empty, and Time Capsule backup says "cannot open"

Yikes.
This morning, I open my Contacts application and the contacts are gone...the entire app is void of any information. No worry, I have Time Capsule. However, when I go to Time Capsule I am told I cannot open the Contacts app.
Is there a way to fix this, or am I doomed?
Thanks!

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

Time Capsul/MacBookPro.sparsebundle" could not be accessed (error -1).

Good Day!
So, I have this problem: Time Capsule says MacBookPro.sparsebundle cannot be accessed (error -01). I have no idea why not, because I am able to access it. See, here are the contents:
Has anyone here dealt successfully with this error? If worse comes to worst, I have not qualms about resetting my Time Capsule.
Thanks in advance for any information you can give me.
~~Kate

See Time Machine - Troubleshooting C17. . . . sparse bundle could not be accessed (error -1)

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I repair it?

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
How can I fix it?

You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
See # C17

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Cannot find time capsule backup to restore

Hello - I have a MacMini (Intel Core 2 duo) runing OS 10.6.7. I used Time Machine to backup my data daily to a remote Time Capsule on my local network; I should also say at this point that I use Time Capsule to backup 4 machines in total. The hard drive crashed, and needed to be replaced. Now I am trying to restore my data to my computer. However, neither migration assistant nor time capsule can find the correct image (sparsebundle) to be mounted - for example, when I "Choose Time Machine Disk to Browse" no disks show up. Migration Assistant behaved a little differently, showing me 2 (out of 4) Time Capsule backups, but not the one relevant for this particular computer.
I know that backups have been performed, and I can manualy mount the specific Time Machine Backup through the finder - at which point I can "see" folders named "yyyy-mm-dd-xxxxxx," just as interesting is a file "yyyy-mm-dd-xxxxxxx.inProgress" - and which appears to be the latest date at which the folder was accessed. I have attached a screen shot of the contents of the folder.
Any thoughts? I really just need to restore the most recent backup, the rest are not necessary past this point.
Thanks!

Hi,
I just ran into the same problem, neither the Migration Assistant nor "Restore from Backup" from the 10.5 Install DVD would find a valid backup on my Time Capsule (which kinda renders it useless).
After some googling and trial and error I found a workaround using Terminal. I don't know why mounting the sparebundle image with Disk Utility wouldn't work, but it isn't available when your computer crashed anyway... So here is my method:
-Boot from the System DVD, choose the language
(-Goto Utilities and start the Disk Utility and reformat your drive, if on Intel check that you partition it with GUID, NOT Apple Partition Scheme NOR MBR, restart from DVD) only if something went wrong with your disk like in my case
-Goto Utilities and start Terminal
-In Terminal first make a directory for the mount, type: mkdir /Volumes/MyBackup
-Then mount the Time Capsule and link it to the folder you created, type: mount -t afp afp://myuser:mypassword@IPAdressOfMyTimecapsule/VolumeWhereMyBackupIs /Volume/MyBackup
-The AFP-Volume is now mounted, but you can't see anywhere.
-Quit Terminal, this will bring you back to the 10.5 Installer.
-Goto Utilities and choose "Restore System From Backup"
-The Dialog will ask you for a Backup Source. You should now see your Time Capsule and an already mounted Time Machine Volume at the location you specified in Terminal.
-Select the Time Machine Volume and press Continue, it'll take a while you show you all the backups, choose the one you want, choose a destination, drink tea.

Limit Time Machine backup/sparsebundle so one machine doesn't hog all the time capsule space?

Is this possible?
I have a brand new time capsule, my wife and I will be backing up our computers to it using Time Machine. Is it possible to limit the storage size of the sparsebundles so one of us (probably me) wont hog all the space?
My wife doesn't use her's as much, while my computer is on almost everyday, so I'm affraid my computer will limit the amount of states, or versions, that she can back up before her time machine has to start deleting old files.
I'm trying to avoid a situation where my time machine goes back a year while her's only goes back a few months.
Thanks!

No. That is not how a Time Capsule and Time Machine work. All backups are adding to existing backups.
About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.
To accomplish what you want would mean using just an external backup drive partitioned with volumes for each of you to use, and the use of a different backup utility that overwrites old files rather than saving them as does Time Machine.

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Time Machine issues (16030) sparsebundle" is already in use for Time Capsule backup

Time Machine issues (16030) sparsebundle” is already in use for Time Capsule backup process. Just started happeing been using it for over two years.

First, restart the computer and the Time Capsule. In most of the cases, this solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

After formatting my HD and eventually restore my system from a backup on Time Capsule, will I still have access to my old backups as normally used to do via Time Machine?

I have a Time Capsule (4th Gen) and my backups on it, I need to completely erase my hard drive. My question is: after formatting my MacBook HD and eventually restore my system (OS X 10.6.8) from a backup on Time Capsule, will I still have access to my old* backups as normally used to do via Time Machine?
*(-and to the newer backups- if I had not restored my system from the last backup).
THANKS

That's a good question. Technically, Time Machine should make a new backup but not erase any old backups. But if there isn't sufficient space on the backup drive, then I'm not sure if Time Machine will simply warn you or just go ahead and remove old backups to make room for the new ones.
In any case, the new backup should have a different backup folder on the backup drive. That's my understanding. You can learn more at pondini.org.

Cannot restore from Time Capsule backup wirelessly to Mountain Lion Retina

I just bought a new 15" MacBook Pro Retina Display and a Time Capsule router. The Time Capsule has supposedly backed up my macbook for a few days but when I try a complete restore from the Time Capsule backup wirelessly, it fails. New to Apple but do remember"can't access time capsule" even though network works fine.
Any help appreciated !!!

See p.4 here - http://www.pondini.org/TM/Time_Capsule.html - and see if the Great Pondoni can help.
He's sure helped others in the past...
Clinton

HT3275 Time Machine couldn't complete the backup to "Time Capsule" because "-.sparsebundle" is already in use.

How do I correct ‘Time Machine couldn’t complete the backup to “Time Capsule” because “….sparsebundle” is already in use‘?.

Check out the More Like This column to the right.
Our most popular problem.. 6-10 times a day..
There is a bug.. fix is to pull the power from the TC.. count to 10 and power the TC again.
See C12 here if you need more help.
http://pondini.org/TM/Troubleshooting.html

I'm getting the following message and need to know what to do about it: "The backup disk image "/Volumes/Joyce's Time Capsule/Macintosh.sparsebundle" is already in use."

What do I do to get backups to resume, when getting this message: "The backup disk image “/Volumes/Joyce's Time Capsule/Macintosh.sparsebundle” is already in use." ?

Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup again

Time capsule backup: .sparsebundle cannot be accessed error -1;

Similar Messages

Maybe you are looking for