Time Capsule Bandwidth Speed versus Fios Router Directly

Verizon just replaced my Fios Router because download speeds were 5 megs/sec. I just received my new one in the mail and hooked it up. I connected to the FIOS router and was getting 27 mbps download and 5 on the upload. I went back to my original setup of turning off the Radio broadcast on the FIOS router and using my time capsule to broadcast wifi....i have dropped to 5 mbps download speed--same speeds when Verizon thought it was their problem. What do I do? I don't understand the limitations or what has happened. Can someone provide suggestions?

Bridge means to remove all routing from the TC.
Open Manual setup in airport utility (on lion v5.6 utility only).
Go to internet tab.
Go to Connection sharing.
Select off, bridge mode.. update the TC.. it is now bridge.
If still slow there are a number if issues.. and I doubt we have found the ultimate cause.. bad firmware in 7.6 could be one of them .. go back to 7.5.2
ie in airport utility go to the firmware update but hold down the option key and you can select older firmware.. they work better than new ones.
You also might need to reset the TC to factory to get rid of the poor settings.

Similar Messages

Using a time capsule to extend a fios router?

I know this topic has been covered many times, but I seem to have trouble finding my answer to my exact questions. I have verizon fios wireless router that they provided with the service. We have a large house with the fios router at one end. At the opposite end, the signal is very weak. I want to use my time capsule to extend the network to the other end of the house. Is this possible without connecting a long ethernet cord and placing the TC at the other end of the house. My ideal situation would be to plug the TC into the wall at opposite end of the house of the Fios router and have it connect to the Fios router and extend the wireless connection...is this possible? If not, can someone please solve my problem?

I just turned the wifi setting of my fios router off and plugged it directly into the time capsule. If I had a large house like yours, I would look at something like this:
http://www.engadget.com/2011/06/08/netgears-universal-wifi-range-extender-now-av ailable-for-baldin/

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

Time Capsule WIFI speed issue

How can I get the most Internet speed from my Time Capsule? I have FIOS with 50mps over Ethernet but it slows to 30-36mps over WIFI.

If you check the specs for the Atheros chip it is clearly single stream.
http://www.qca.qualcomm.com/wp-content/uploads/2013/11/AR9285.pdf
The Apple router is built to Apple's limited 2.4ghz type setup with a Max speed of 130-150mbps on 2 streams.. so 65mbps on single stream is just spot on.
There is nothing you can change to fix it.. at least not in the apple router.
You can plug in a standard 2.4ghz 300mbps router like your old TP-Link and use that as WAP and that will give you higher speed for your PC.
Simply put the router into WAP mode.. or if that is missing use WAN BYPASS (just google for it).. and plug the TP-Link into the TC by ethernet. LAN TO LAN.

Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
Neighbour's wireless Router = Time Capsule = My Macbook
If I can please tell me how to set this up in details please. thanks for your time.
Message was edited by: Thomas Pink

You are trying to set up the Time Capsule as a Wireless Router
and Repeater? - To share an existing wireless network, wireless?
The AirPort Extreme was capable of repeating (like a transceiver)
to and from an existing wireless network, to expand upon it; but
only did this with another AirPort product, such as an Express.
The Time Capsule and many of its features are outlined here, with more
information: AirPort + Time Capsule: http://www.apple.com/support/airport/
You may have to direct your question regarding expanding an existing
wireless network, to the Discussions section for the specific products.
Usually, the "extend a network" wireless feature in the software setup
only applies to the use of a second Apple AirPort-type base station;
such as the Extreme, Express, etc. The compatibility is between the
AirPort-like Apple products; but a bridge could be made if an Express
were attached to the other wireless network via Ethernet cable, then
the Time Capsule may be able to see it. This would require testing.
Apple - Support - Discussions - AirPort (+ Time Capsule)
http://discussions.apple.com/category.jspa?categoryID=140
Good luck & happy computing!

Would time capsule be a fast enough router?

I have a imac desktop running safari and a windows laptop running windows xp(802.11g). My laptop is to slow running off of airport and Im not happy with airport as my only router. I need a router and a external hard drive. Would time capsule be a fast enough router for me?

Time Capsule is just another Airport Extreme Base station with a hard drive (ok, that's slightly simplistic), so if the laptop can only connect at 'g' speeds, I wouldn't expect any difference from the Time Capsule.
Do you have an Airport Base Station or are you sharing the Airport connection from your iMac? I'm not sure, but I'd think you'd get slower performance from the latter. If ABS, is the network configured as g-only or b/g compatible?
Maybe there is something wrong with you laptop configuration.

MacBook Pro and Time Capsule after adding new wireless router

I have a MacBook Pro and Time Capsule (which functions wirelessly to router and computer). I added a new wireless router (netgear, not my idea) and had to change name of wireless network. Now Time Capsule flashes amber and does not show up in Airport Utility.
Do I have to set up Time Capsule from scratch? If so, if you can aim me to directions I won't have to waste tech support's time.
My additional question on a similar vein: I also have a Time Capsule (second time capsule) which is plugged into the wireless router using ethernet cable for use with a windows notebook running windows 7 which backs up wirelessly. Do I have to change anything on this Time Capsule (second Time Capsule) as a result of change in name of network (I've already adjusted computer to connect to network)?

Hi DD,
If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342).

Setting Up Time Capsule as a Second Wireless Router

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it using my macbook (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router to expand my neighbor's network. Like repeating (like a transceiver) to and from neighbor's wireless network, to expand upon it.
Internet = Neighbor's Modem = Neighbor's wireless Router = Time Capsule = My Macbook
If you can please tell me how to set this up in details on my TC please. thanks for your time.

802.11g AirPort Extreme Base Station -> 802.11n Time Capsule
With "mixed" AirPorts, you will need to configure both routers into a Wireless Distribution System (WDS). Your neighbor's AirPort Extreme Base Station (AEBS) will be the main and your Time Capsule (TC) will be the remote base station in this WDS.
To simplify setup, you should connect your TC directly to the AirPort's LAN port by Ethernet. Once the WDS is configured, you can disconnect the TC and place it at the desired location.
The following are the basic configuration steps to create a WDS:
(Note: To facilitate the WDS set up, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - AEBS
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)
802.11n AirPort Extreme Base Station -> 802.11n Time Capsule
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.

How do i link my time capsule through a virgin media router(netgear))

Hi i am trying to use. My new time capsule as the main wireless router . I have a virgin media netgear router VMDG280. rebooting the router time capsule and computer still results in a flashing amber light
Thanks
Steve

I have had the same problem but SOLVED IT this evening.
If you type in your IP address 192.168.0.1 into your google search line it launches you into your virgin media . Put in your username (in my case the default was 'admin' as I hadn't changed it and my password for my virgin media account (not the router password). this took me into the settings page to change my Superhub into a modem only. NB - you can change this back at a later date.
i then re-booted my virginmedia box and then did a soft reset on the Time Machine and BINGO.
I went into the aiport utility on my imac and it asked to create my own home network name and password. Everything works fine and connects to my new home network name in the wifi settings. The time capsule was able to see my network and is now backs up.

Time capsule not working as wireless router

I am having trouble with my time capsule working as a wireless router. It appears in airport utility and the green light is on. It is backing up my computer which is hardwired with via ethernet. The network setting is on bridge. Any thoughts?

Your first statement and last statement are in conflict.
I am having trouble with my time capsule working as a wireless router.
The network setting is on bridge.
If the TC is set to bridge it cannot work as a router. To be a router the TC must be set to dhcp + nat.
If you already have a router, then the TC should be in bridge. That is correct. If the modem is pure modem then the TC is in the wrong mode to work.
You should have the wireless set to create a wireless network..
Use all short names, no spaces and pure alphanumeric. Set a different name for 2.4ghz and 5ghz until you sort the problem.. if it is just connection to wireless issue.
Please clarify what is the problem.

What is a apple time capsule? Is it a router?

What is a apple time capsule? Is it a router?

mitch16 wrote:
Is it good for gaming and other devices?
No.. it has no upnp. Many consoles depend entirely on upnp to work.. eg xbox. If you want to run two xbox live sessions you must run upnp for it to work behind a NAT router.. Apple decided not to add upnp even though it would be a simple addition. They built their own port forwarding application NAT-PMP which is fine for apple stuff and useless to the rest of the world.

Will a time capsule work connected to a Sky wireless router, or should time capsule replace the Sky wireless router

I cant work out whether I should connect my new time capsule to my existing Sky wireless boadbannd router, or does the time capsule kit replace my Sky
router .I would really appreciate a none technical answer to my dilema before I open the box.

It depends on what the sky router exactly is..
If it is a modem, then you definitely have to keep it.. is it satellite or some sort of wireless internet??
If it is a router that plugs into an existing modem then in all likelihood the TC can replace it.
If the sky router can be bridged then the sky router can be kept but the TC work as the router.
And finally even if the sky router is locked and you cannot do anything.. the TC can still work as a bridged device to provide backup and wireless connection within your network.
So however the situation it is possible to use your TC.

My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

Why is Time Capsule Internet Slower than Belkin Router?

My Time Capsule is conneted via Ethernet to my Belkin Wireless router and is serving as my wireless backup drive.
I am extending the Time Capsule "network" via an AirPort Express in order to boost the signal over distance.
However I find consistently that when I log into the Time Capsule, my internet access is significantly slower than if I access it over the Belkin wireless router, whether I use the Airport Express or not.
I've also found that logging into the Belkin from my Mac to do my Time Capsule backups seem to run considerably faster and have fewer "stalls" than when going direct to the Time Capsule, which also seems quite strange.
Is there some reason for this? Something in my settings conflicting? One would assume that with the Mac going directly to the Time Capsule which is connected directly via Ethernet, that it would be faster than going through the 3rd party Belkin router, or at least no different.

Let me just get it clear..
Belkin is main router..
TC is bridged and plugged into it by ethernet.
Express is doing extend wireless to the TC over 5ghz.
Now there is a couple of misunderstandings..
The Time Capsule is set for the 5GHz band ONLY to avoid conflict with the numerous 2.4GHz radios in close proximity, including the Belkin, automatic channel selection.
TC is not able to shut off the 2.4ghz.. even if you don't use it.. it will work.
So it is better to set it up and use it on fixed wireless channel out of the way. Indeed if it is some distance from the belkin rather than right next to it.. you can use roaming network setup. Both Belkin and TC use the same ssid ie wireless name.. same security ie WPA2 AES = WPA2 Personal. Same security password.
But different channel.. IMHO it is better to lock the wireless channel. Set TC to 11 and belkin to 1.
Wireless channel on 5ghz is less of an issue but I recommend lower end channels.. ie <40.
Extending wireless on 5ghz is often poor.. the range is actually bad.. and link speed can be worse than using 2.4ghz.. so I would carefully test the speed using wireless on 2.4ghz and then on 5ghz. .If possible only use 5ghz on single hop up close to the TC.
Any wireless that does double hop.. ie TC--Express--computer will go at half the speed of TC--computer, if they link at the same speed. This is caused by double hop wireless being highly inefficient way to extend wireless.
If the TC is faster by ethernet via the Belkin than via the TC I would find that difficult to follow and you will need to give me exact model number of the belkin.
That the belkin 2.4ghz wireless is faster than the TC is no surprise.. apple limit wireless to N lite at 2.4ghz.. whereas the belkin is probably 300mbit. And better signal.
You have heaps of testing to do.

Time Capsule slow internet with Linksys router

I has issues with slow internet page loads. I have a Linksys WAG325N router connect to Telstra ADSL 2 with a Time Capsule. I use two wireless network one broadcasted from Linksys and the other wireless network from the Time Capsule. When i'm connected to the time capsule i had slow internet page loads and the Time Machine backups fail.
When connected to the wireless network from the Time Capsule i get 10% to 30% packet loss when i pinged the Linksys router and 0% packet loss when i pinged the Time Capsule.
I then connected to the Linksys router then i has packet loss with i pinged the Time Capsule and 0% loss when i pinged the Linksys.
I used the Airport Utility and changed the "Ethernet WAN Port" from automatic to "10 Mbps/Full Duplex".
This seem to fix the problem. I think there is some issue with the port speed negotiation between the Linksys and Time Capsule.
Time Capsule 7.4.2
LinkSys V1.00.13(01)

The same thing is happening to me, exactly. Although my top speed is lower than yours (I'm on FiOS). Unplug it for a second, and you're back to normal. Otherwise, it will slowly and inexorably degrade until you have something worse than dial-up.
This is completely unacceptable, and it's far too typical of the current state of Apple's quality control and support that there is no official acknowledgment of this screamingly obvious and annoying problem, which happens every single time I use my Time Capsule, which is to say every day, and no recommended fix.
Sometimes I feel as if I could really hate this company!

Time Capsule Bandwidth Speed versus Fios Router Directly

Similar Messages

Maybe you are looking for