Time capsule base station not working with Airport Express

Hi...
I have a network setup using the airport base station hat is part of my (older) time capsule. I also have an older Airport Express.
My network is working fine...and looks like the first image below. When I plug in the Airport Express and reset it...I get what you see on the second image. The thing is...the airport utility is supporting the base station just fine prior to looking for the airport. I presently have airport utility 6.3.2 and my airport base station has firmware 7.6.4.
Any help would be great....thanks!

Your express is a G wireless model and not compatible with the N wireless TC.
You can use it but only by using it with ethernet and setting it up as AP.. you also need to use 5.6 utility not v6.. apple removed support for G wireless devices from v6.
LOL..
I was 2min late.

Similar Messages

Time capsule now does not work with Lion just installed.

Just downloaded Lion to Mac Air. Time capsule now does not work. Where is the problem?

Restart the TC.. lion is stupid.. it forgets what it is connected to with alarming frequency ... like someone suffering dementia.
If it continues to have issues, plug the TC directly to the lion computer by ethernet (if not already) and try again. Change the wireless to manual in airport utility and change the wireless name.. to force a new configuration. Once setup you can just use wireless.
In the end you may need to reset the TC.. just hold in the reset button for about 10sec. It should then become available.. a reset does not do anything to data on the hard drive but you might need to restore any passwords.

HP LaserJet 1000 not working with Airport Express

Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
MacBook Pro Mac OS X (10.4.6) D-Link DI-524

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Mac OS X not working with Airport Express but Win XP is ok on the same iMac

Hello everyone,
as the message says I am having troubles with Airport Express.
To say it quickly, I live in a house share in London, and everyone in the house enjoys the wifi without troubles. I do as well with my macbook from every point of the house.
The troubles are with the big iMac: with mac os the internet signal won't just work at all, pages take minutes to load with both safari and firefox, and most of the times the loading times out.
I thought it was a signal power problem, but the weirdest thing of them all is that... when I switch to Windows XP on the same iMac (and right now I am writing from that!) the internet works perfectly!
Then I switch to mac os again... and slow internet again!
Anyone has an idea of what could this be?
Many thanks for the support

Yes, I just discovered this problem on my own machine.
I just wanted to check some settings and discovered that the behaviour of the GUI of Server Admin was somewhat "erratic": First this "no services are configured" message. Some of the configured servers were marked with the usual green "up and running" bullet, others dark grey - those were normally configured and running and clicking the appropriate line seemed to force Server Admin to check the actual state and then turned also green. But sometimes configuration pages were "greyed out", or while switching through the tabs Server Admin claimed that where were "unsaved changes" which should be saved (or discarded).
And then SMB: this was light grey, as usual when a service is not running and clicking on it I browsed through the configuration tabs - everything seemed ok (all my settings were correctly shown, configured as PDC with right domain name etc.) - and I started the service. Then suddenly the configuration settings changed to the default settings - no more PDC, but a "standalone server" with workgroup name "WORKGROUP"...
Looks for me, as if Server Admin lost it's "source" file for the configuration (the file in /var/db/smb.conf says, that it is automatically generated -- does somebody were the source file is stored?)...

HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
Can anyone help me out? I can't seem to resolve this and I'm an apple head

I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
All worked fine with IOS 5.0
Whats going on?

HT3546 Does the Airport Extreme Base Station not work with the OS X Lion?

Ever since updated to OSX Lion can't get our airport station to work. Is it too old and won't work with this upgrade so do we need a newer airport?

Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion which should work with your older AirPort Extreme.
You can keep both AirPort Utility 6.1 and 5.6 on your Mac and use the one that you want or need at the time.

Imac internet not working with airport express

Hi there,
I purchased an imac for my upstairs bedroom, but the signal from the time capsule was weak, so I bought an airport express and set it up. But still I cannot connect to internet even though after running the network diagnostics say I am connected to internet. My macbook works perfectly in the bedroom with all airport bars working, but the imac still has only two bars. I've tried everything, help!!

Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

Xbox 360 not working with Airport Express

I have a Airport Extreme router and I just bought a airport express so I can wirelessly relay the signal and hook up my xbox 360 to the express. I put it in WDS mode and it worked fine up until the xbox 360 ran the IP address test. It didn't pass the IP and my settings were on automatic. I thought the Express acts as a extension to the Airport but I guess not. Are there any settings I can change to make this work? Please help.

Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

BT Home Hub not working with Airport Express

We have just moved house and had BT Internet installed. It uses the very latest Home Hub but this is causing the Airport Express to fail.
On occasion it works but more often than not the connect is lost and the MacBook/Airport Utility fail to see the AE's again.
What can I do to keep my Airport network up and running all the time. I NEVER used to have this problem with my old set up at my home house.

Whenever you make a change on your network.....in this case a new router......you need to reset the AirPort Express back to factory defaults and then reconfigure it again to work in the new environment.
Power down the AirPort Express
Hold in the reset button on the AirPort Express and keep holding it in for another 8-10 seconds as you plug the Express back in to power
Release the reset button
Allow 40-45 seconds for the AirPort Exrpess to restart
Open AirPort Utility and click Continue to follow the guided setup to configure the Express to "join" your wireless network.

D-Link DIR-615 (Rev H1(!)) does not work with Airport Express?

Hi there,
I had my AirPlay working just fine with my Airport Express (AX) and my wireless N Router D-Link DIR-615 (Rev. B2). Now I changed my Internet provider and received a D-Link DIR-615 (Rev. H1) and I cannot find my AX anymore (I mean, it's still here, but the AirPort Utility cant find it!)
Are there known issues between those two?
(The Rev. H1/B2 is the Hardware Version of my D-Link DIR-615. The Firmware is up-to-date (8.01 I think))
The status light is a solid, beautiful green.
I already tried the following:
- restart the AX, the D-Link and my MacBook (10.7.2)
- changed from AES to TKIP (found that somewhere in the internet)
- Reseted my AX to factory settings and configured everything new. (via Ethernet)
Probably interesting:
- After resetting to factory settings and configuring everything new, the AX showed up in iTunes, but when I tried to connect with it, it kept me waiting for 1-3 Minutes and simply did not connect w/o error message. The AX disappeared after restarting iTunes.
I'm running out of solutions..
Anyone a good question/suggestion or answer for me?
greetings
squob

Only way I see out other than waiting, is to hook he Drive to a Mac, (FW preferable for speed), then get Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
Which can be set to trigger Backups when Shares mount.

Photosmart C4280 not working with Airport Express

I have a Photosmart C4280 connected to an Airport Express Base Station via USB for wireless printing. I have two computers that I want to use for printing - an iMac and a Toshiba laptop running Windows XP. Printing from the Mac works perfectly and required zero configuration. On the laptop I created the printer using Bonjour. It located the printer on the network without a problem and I selected the driver for the HP 4200 Series printer. However, when I try to print, the print job sits in the qeue and eventually I receive an error message that it couldn't print.
I have disabled the Norton and Windows firewalls but that doesn't solve the problem. I have also tried some generic drivers but that didn't work. Does anybody have any additional suggestions?
Thanks in advance.

Check out http://discussions.apple.com/message.jspa?messageID=8883084#8883084
It describes a Vista/AirPortExpress/C4280 installation, but should be relevant to XP.

Time Machine will NOT work with Airport Disks!

It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
http://www.apple.com/macosx/features/timemachine.html
It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Time Capsule Base via ethernet to an Airport Extreme to extend Wireless

I have set up a new Time Capsule dual band (TCBStn) as a base station (connected to the internet). I want to connect a new Airport Extreme dual band in a family room far away from the base via Ethernet. This family room has an Apple TV to which I want to stream video. I am not able to connect the AE via the Airport Utility as the Airport Utility does nor recognize the AE.

My recommendation is to configure your two base station as a "roaming" network. This will allow wired/wireless clients to connect to either and still be able to "see" each other for sharing.
Please start by powering-down all of your network components as follows:
o Power-down the modem, Time Capsule (TC), AirPort Extreme Base Station (AEBS), Apple TV (ATV), and the iMac. Note: The power-down order is not critical.
o With all of these components powered down, disconnect both the TC & AEBSn from the network, and then, perform a "factory default" reset on both to get them back to their "out-of-the-box" configuration.
o After both have been reset, remove them from power, and then, reconnect them as follows: modem > \[WAN port] > TC > \[LAN port] > \[WAN port] AEBSn, where ">" represents an Ethernet connection.
o Power-on the modem; wait at least 10-15 minutes.
o Power-on the TC; wait at least 5-10 minutes.
o Power-on the AEBSn; wait at least 5-10 minutes.
o Power-on the iMac.
o For now, leave the ATV powered-off.
In this configuration, both routers will be transmitting their own wireless network, each having a Network Name of something like: Apple Network NNNNNN, where the Ns represent the last six digits of their respective AirPort IDs.
Now, from the iMac, use the AirPort Utility (in Manual Setup) to access the TC to make the following configuration changes:
o Time Capsule > Base Station > Time Capsule Name = TC
o Time Capsule > Wireless > Wireless Mode = Create a wireless network
o Time Capsule > Wireless > Wireless Network Name = <enter the desired Network Name>
o Time Capsule > Wireless > Radio Channel Selection = Automatic
o Internet > Internet Connection > Connect Sharing = Share a public IP address
o Leave all the other default settings (for now).
o Click on Update to write the new configuration to the TC.
While still in the AirPort Utility, select the AEBSn, and then, make the following changes:
o AirPort > Base Station > AirPort Extreme Name = AEBSn
o AirPort > Wireless > Wireless Mode = Create a wireless network
o AirPort > Wireless > Wireless Network Name = <use the same Network Name that you created for the TC>
o AirPort > Wireless > Radio Channel Selection = Automatic
o Internet > Internet Connection > Connect Sharing = Off (Bridge Mode)
o Leave all the other default settings (for now).
o Click on Update to write the new configuration to the AEBSn.
You should now have a basic roaming network. Verify that your iMac can access the Internet while connected to either base station by wire or wireless. Please post back your results.

Time capsule base station not working with Airport Express

Similar Messages

Maybe you are looking for