Time Capsule Blinking Orange when iMac off

I have my time capsule plugged in via USB and the wireless mode off - its just used for videos which is fine until I turn my iMac off and then it blinks its light orange to mean theres a problem....
Anyone any idea why and how to make it stop? When its switched on the light is green

When the TC is in a flashing amber condition, open AirPort Utility and click the TC to select it on the left and then click Manual Setup.
On the summary page of settings, click on the word "Status" and a message will appear to offer information about the "error".
It may be a notice that the TC does not have an internet connection. If you don't use it to connect to the internet, you can click "ignore" and the light should stay green at all times.
I'm not that familiar with iTunes, so you may want to start a new thread for that issue if you don't see responses on this thread.

Similar Messages

Time Capsule blinks yellow,when I go to airport utility to set up, it Says This apple wi-fi bse station doesn't have any DNS server addresses and might have trouble connecting to internet. My internet works, but I can't back up anything. What do I do??

Worked fine for about a couple of weeks after my son -law installed the time capsule. I can access the Internet both from my wife's I phone and from my desktop. I think that I need to get the DNS server numbers and put them in the two blanks; but where do I get them? Thanks, Jim

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Time Capsule drops connection to iMac

I've recently got a late 2009 iMac 21.5" and am having issues using it with my Time Capsule. Intermittently the iMac loses connection, it appears to still be connected the the TC but it can't communicate. I've set a ping going to 10.0.1.1 in the Terminal app with no reply and then turn airport off and back on again and hey presto it starts receiving a reply. I've looked at interference, change channel on my TC, no difference. So I ran an ethernet cable into a LAN port on the TC and no it works fine, two days with no drop outs. I don't know what to try next any ideas?

I think I have the same issue.
My iMac is connected to the TimeCapsule via ethernet (though I do have wifi running to synch a few apps with iphone).
My problem is that I have my iPhoto library file on the TimeCapsule so that it can be accessed by other family members. Almost invariably, when I plug in my iPhone, iPhoto pops up and asks which library to use even though I have indicated that the iphoto library on the TimeCapsule is to be the default.
So, in essence, I don't have to log back in, only re-connect almost always which is a pain.
Any ideas appreciated!

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

HT3275 The backup disk image "/Volumes/terry bostock's Time Capsul/terry bostock's iMac.sparsebundle" is already in use.

I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.

A constant bug in Mountain Lion.
Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
Give that a try first.

Time Capsule 4 gen. with iMac OS X Lion 3 Windows PC (XP OS, Vista OS, Seven OS) cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC.

Installed today Time Capsule 4 gen. with iMac OS X Lion. I also have 3 Windows PC (XP OS, Vista OS, Seven OS). Internet Access is cable modem with TC as Wi-Fi. Time Machine on iMac found TC for backup easily. Have Wi-Fi access on PC XP with Airport utility but cannot create TC. Does the Airport utility under Windows is way to access backup capabilities with TC ?

The TC is really just an external networked hard disk plus router.. you can access the hard disk and place files on it from any computer. You can backup any computer to the TC but it will have to use a backup software in windows.. there are literally thousands available. The built in msbackup is horrible.. but you can download lots of different software and buy then online for not a lot. Macrium Reflect has a free disk image backup, and when you pay for it includes incremental. I think disk images are well worth it, as they recover much better.. and their is a proper method of recovery using a boot cd.
BTW the TC space is not endless. And it is designed to hold a large number of incremental backups.. so anything you do in backing up several machines will make the number of backups limited. Remember you can also use a usb hard disk plugged in as a Network accessible disk. But it has to be formatted HFS+ or Fat32.. the later being highly undesirable.

Time Capsule on a new iMac

I just returned an iMac today, for repeated Kernel errors. (I only had it for 4 days). The store is transferring my settings/music etc... to a new iMac which I am supposed to get tonight. I was using a new time capsule on the origianl iMac - my question is when I get the new iMac and load the time capsule cd, will all the information from the old iMac remain on the Time Capsule? Or is the Capsule smart enough to recognize it as a new machine and dump the old backups? Don't need or want the old backups...
Sorry for what might be a dumb question but his is my first time with either a mac or a time capsule.
Hopefully my kernal errors were not due to the time capsule - just happened on this discussion but it's got me wondering now. Thanks.

Thanks vk, I'll look in airport utility. I talked with the tech at the apple store who is migrating & setting up my new iMac. He is running tests on it tonight so it won't be ready until tomorrow. He stated that he has not heard anything from apple about there being a problem with the TC/TM software update. Guess we'll see.
From the little bit I was able to use my iMac I was sure impressed and glad I made the switch. The 24" display is awesome.
Thanks again for such a prompt reply.

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

My MBP doesn't remember my Time Capsule wireless network when waking from sleep

My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep. Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password. This is very cumbersome. And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem.
It appears that this problem has to do with the hidden SSID. I don't need the lecture on how hidden SSID provides no serious security benefit. That's why I have the WPA2 encryption. I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
Solutions I've alread tried:
1. Open Network Preferences
2. Select Airport from left hand column (and ensure Airport is at top of that list)
3. Select Advanced
4. Delete all Preferred Networks.
5. Apply settings.
6. Restart computer
7. Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
This solution works fine as long as I don't take my computer elsewhere and connect to another network. As soon as my preferred networks list gets another network, my MBP stops finding my TC network. Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network." Thus, I assume the problem lies with the Time Capsule.
Any ideas?

LaPastenague, thanks for weighing in. Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently. With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
When an SSID is hidden, the base station does not broadcast its identification. Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality? Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP? And once broadcast by the MBP, the TC should detect and reply?
Basically, the MBP can connect to the hidden TC manually just fine. The MBP can connect to the old setup automatically just fine. The MBP cannot connect to the TC automatically. Aren't these automatic connection functions solely on the MBP?
I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
Z

I keep getting the message "The backup disk image "/Volumes/Donald Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html

My airport time machine blinks orange/yellow. Is the HD full? How do fix this?

My airport time machine blinks orange/yellow. It is always trying to prepare to back up but doesn't seem to be. Looks like HD is full. How do I correct this?

Please check out this Pondini Time Machine Troubleshooting article to see if it will help.

3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - J

Thanks Allan for your quick response to my amateur questions.
Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067   MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me!    - John Garrett
PS.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i5
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f17
Serial Number (system):          W8*****AGU
Hardware UUID:          *****
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

Time Capsule WiFi disconnects when a Fujitsu Siemen Laptop with b/g network

Time Capsule WiFi disconnects when a Windows Vista based Laptop with "b/g" network connects. When i use Macbook with "n" Network.
Surprising that TC and MacBook both from Apple can't stay connected when Fujitsu Siemens Laptop joins through WiFi.
I use a DSL Modem (Speed 1 Mbps) connected thru ethernet to Time Capsule on Bridge Mode.

Yes, n is better, but if you have it running on b/g/n (since you have to with your b/g only notebooks) the n is inactive. Kind of a waste. Others have resorted to adding another wireless router which one set to b/g/n and the other n-only.

Why is my time capsule blinking yellow?

why is my time capsule blinking yellow?

The Time Capsule is complaining about something.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the amber dot and another window will open to explain what the Time Capsule is whining about....along with suggested actions to remedy the situation.

Can I run time capsule on both my imac and pc laptops?

Can I run time capsule on both my Imac and pc laptops?

Depends on what you mean by "run". Both the Mac and PC could connect using either wireless or Ethernet.
The iMac could backup automatically using Time Machine over wireless or Ethernet.
Genie TimeLine Pro might be able to backup the PC automatically, but you would need to check on this with the Genie folks to confirm.

Time Capsule Blinking Orange when iMac off

Similar Messages

Maybe you are looking for