Time Capsule blocking one web site.

My Time Capsule is plugged into several PC's and several MAC's. I can't get to my work email web site only with anything that is attached or connected wirelesly to the Time Capsule. If I hardwire a computer directly to my cable modem I can access the site. I've had the Time Capsule for about a month and a half now and it just started blocking this site about three days ago. Any suggestions?

Having this same issue. All sites work fine except for one: http://bugzilla.mozilla.org . I've restored the Time Capsule to default settings, use DHCP to auto config the TC from the modem, same problem. If I plug directly from mac into cable modem, the site works.
The IP resolves fine. I can traceroute to the IP, can ping it, but when I try telnet'ing to the IP on port 80, connection times out. No TC, it works fine. Grrr... really frustrating.

Similar Messages

  • Parental controls are not blocking specific web sites

    Using 10.6.1 I am unable to block specific web sites through the parental controls. The site in particular I was trying to block ended in .tv/ Is there a problem in snow leopard or is this type of site not able to be blocked?

    There are a variety of Adobe services that need to remain enabled in order for Photoshop to work.
    I would log in to the administrator account and make sure anything with Adobe is set to "allow."
    Then, log in to the restricted account and test. If Photoshop works as expected, you can turn off one item at a time until you find the one that "breaks" Photoshop's functionality.
    ~Lyssa

  • How to show data from one web site to other web site having diffrent domain.

    Dear all,
             i want to show the selected data from one web site to other web site.
    the location of the two web site is geographically seprated (and diffrent domain)
    Please tel me in how many ways it can be accomplished.
    If it can be done using jquery then please tel me the function or procedure to do it.
    Note: ( i have seen the above behavior in many web sites .
    like, i was purchasing some thing but finally declined,
    after that i visited some other web sites to gets some other data on other area
    , and i show my selected items of the first web site  on second website as advertisement.)
    i would like to know how these things are accomplished and how it can be done in asp.net.
    yours sincerely

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can only access one web site

    I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
    when I try to connect to any other site the page Hangs during load and neve displays.
    I can ping all of the web sites that do not come up
    I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

    Hello!
    I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
    I have an edmx file in a WCF webservice which feeds a silverlight app.  The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model.  The view is basically { ID, ParentID, Name, ... }.  In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure.  The edmx and the service build without any errors - hurrah!  However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
    Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'.  Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
    When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
    Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
    Tim
    Web Developer at Terrapinn

  • How can I get version 3 of Firefox. One web site that I need to use monthly hasn't upgraded their software & it doesn't work on Firefox, Google Chrome or Internet Explorer

    Up until two months ago I was able to access this one web site (www.melaleuca.com). It is a site that I order from monthly. When I type the address in I get a screen saying "the connection was reset while the page was loading". I called their tech support & of course it's never their fault, it must be my computer! NOT! I go on financial trading and banking web sites that are super crypted, so it's not my computer. The tech support said that their web site only works with Firefox 3.0. I told them that was dumb! My other theory is that one of those insidious "upgrades" that Microsoft is always doing changed something, but they're never going to admit to it. I can access the web site on my iPhone, but that is tedious. Help!

    I'm sorry I don't have an answer to your problem, but I wrote to them also to get back the old Firefox, where Google was there. I lost one of my toolbars with certain
    bookmarks, this is a major headache. If you get any info. I would like it if you could let me know and I will do the same. [email protected]

  • Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Not via Time Machine.   It cannot back up from a network location.
    The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
    EDIT:  And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port.  Second TC not required.
    Message was edited by: Pondini

  • Storing multiple passwords for one web site

    I go to one web site that I have over 30 different user accounts that I access. Is there a way to have Firefox remember all of the user account login and passwords?

    You may be able to do that with the LastPass add-on https://addons.mozilla.org/en-US/firefox/addon/lastpass-password-manager/
    I don't know about the maximum but it does support multiple info for the same domain / URL. Please note that the app is basically a secure online backup solution for passwords and whatever is created is mirrored to an online backup site.

  • I am getting an invalid certificate notice when going to one web site only, that formerly was not a problem. Happens with Safari and Google Chrome. Any ideas?

    I am getting an invalid certificate notice when going to only one web site, that previously was OK. Happens with both Safari and Google Chrome. Would emptying the system cache fix the problem?

    Well, it seems weird & it has no email listed, you might try contacting them to see...
      [email protected]

  • How can I block bogus web site that keeps trying to update firefox? Need to identify bogus site too.

    How can I block bogus web site that keeps trying to update firefox? Need to identify bogus site too.

    hello, this is a scam tactic that is trying to trick you into installing malware, so don't download or execute this kind of stuff - updates are handled automatically by firefox so you don't have to download anything (you can always initiate a manual check for updates in ''firefox > help > about firefox'').
    you might also want to run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan] in order to make sure that there isn't already some sort of malware active on your system that triggers these false alerts.
    [[Troubleshoot Firefox issues caused by malware]]
    you could also help by pressing F10 & going to ''help > report web forgery'' while you're on this dubious page - this might get the page into the list of malicious sites that get blocked in firefox (the actual list is maintained by google) or when such pages use the firefox logos or trademarks to trick users into downloading malware you could also file it at https://www.mozilla.org/en-US/legal/fraud-report/.

  • I cannot log into one web site on main computer.

    Hello,
    I have a weird situation which the company that I'm working with can't provide an explanation.
    I am trying to log into the following web page: http://www.methodintegration.com/solutionproviders
    but it says that it doesn't recognize my username/password in Firefox, IE, Opera, and Chrome browsers.
    However, in a virtual machine with Windows 7 32-bit (same OS as main computer), I am able to log in successfully. I have tons of programs on my main computer so I can't figure out which one is blocking it. I have Avast! antivirus on both machines, so I know this isn't causing the problem. I tried uninstalling Spybot on my main machine (since this is not on the virtual) and that didn't solve the problem. I also tried renaming the hosts file to hosts.old and I tried removing all the Spybot entries in the hosts file but this didn't solve the problem.
    Is there any way to run a log or determine what protocol that web page is using that something else is trying to block? I have already tried removing all web browsing history, cookies, cache, etc. and it does not fix the problem. Could this be something that visiting the site for the first time was put in the registry with a different user name/password?
    == This happened ==
    Every time Firefox opened
    == First time I tried logging into web site.

    I don't have the firewall turned on for both machines; I only have a firewall through my router (which would affect all machines). I thought it might be caused by Spybot, but I uninstalled it and I still had a problem. Avast is installed on both machines, so this is not blocking it.
    Would a web page that uses javascript do anything to the registry?

  • East/West Arrows not appearing on just one web site?

    When in a certain financial site only [Optionsxpress.com], there is no arrows appearing at the bottom to move in the east/west direction to navigate the screen, all other web sites ok, When I tried it on Internet Explorer it was ok, I prefer to use firefox at all times. please help

    Thanks for all the replies folks...
    I haven't tried another browser (I like IE and didn't want to install something I don't really want) but I could do to aid trobleshooting if needed (I use Acronis so can roll back).
    Anyhow after all the trouble yesterday I unplugged the HH rather than doing a "soft" reset via the button. The site that was problematic is at the moment OK.
    If a site is unobtainable for whatever reason why does a reset of the HH "find" a path to the site only for it to fail again.  
    I see others have had similar issues although Bing.com is one I do use and that has been fine for me.
    Whether this is related or not I have no idea but after all the resetting of the HH i thought I would just try Speedtest.net to make sure my line profile hadn't suffered. The "ping" value was a little higher than normal but what was was odd was that the server automatically chosen to run the test was at the other end of the country rather than more local ones.   

  • Tracking Time on a particular Web Site

    Several people in my house share the same laptop. I would like to see how long some one was on a particular web site. Can I look at that in some file on my mac? I have looked through Safari and can't find anywhere to find that information. Maybe in Terminal?

    Hi Bernie,
    Safari keeps track of the date and time when website are downloaded (viewed) in its history. It has no way of knowing how long you view the site but will give you the date and time of the next site you view which could give you an idea. The date of access is stored within its history plist file (~/Library/Safari/History.plist).
    If you open this up and look under root>WebHistoryDates>Item#>'Last Visited Date' (item number being the most recently visited site) you will get the time of the visit in absolute seconds. Absolute seconds are the number of seconds that have passed since Midnight January 1st 2001. Random I know. Anyways if you say access a video on youtube at 300,000,000.0 and then accessed your email at 3000,000,060.0 you could determine that you viewed the youtube site for 1 min sometime in June of 2010.
    There are programs which will instantly calculate the date and time for you from these numbers but for your purposes it seems you just need to subtract the 2 to get number of seconds passed.
    Hope this helps.
    edit: be sure you don't change anything in the plist file, nor have it open when safari is running, to prevent any corruption.
    Message was edited by: taylor.henderson

  • Time Capsule Blocking Verizon Email

    My Time Capsule is blocking Verizon email.  The problem is on the wired and wireless connections.  It seems clear that the email is getitng through the modem and then getting blocked by the Time Capsule.  I am running OS X Yosemite 10.10.1 on my imac but the problem is also present on my iphone 5 and my macbook air.

    To provide a little more info, Verizon is not my internet provider; TWC is.  The airport is plugged into a dedicated modem (not a modem/router combo device).  The verizon email addresses are the only ones that don't come through.

  • Time Capsule preventing one website from loading???

    I maintain my high school's alumni website. I had no problems accessing it I prior to purchasing my Time Capsule. I was using a Linksys router prior to this. After adding the TC, I cannot access the website. If I unplug the TC and connect my cable modem directly to my iMac, I can access the site, but as soon as I put the TC back in, it won't display the site. I have the problem with both my MacBook (connecting wirelessly) and iMac (wired). But if I take the MacBook to Starbucks, I can connect to the site with no problem. So I have to believe it's a setting in the TC. When I connect to my company's VPN, I can hit the site (since it uses corporate DNS and such). Any ideas. I've looked at the various settings in the TC a hundred times, but nothing seems wrong. Also, I have not had a single other website give me any access problems. Simply one site, so far. But it's been this way for over a week now.

    Just did another test by reverting back to my Linksys router (i.e. took out the Time Capsule from the picture entirely). I can reach the site with no problem from all my computers. As soon as I resume use of the TC, the sites cannot be reached again. I also downgraded the TC firmware to 7.4.1 but this did not solve the problem either. So I returned it 7.4.2. Ugh. I guess I'll just live with it and do the website maintenance from my work computer thru VPN.

  • Problem accessing just one web site. No other site...

    I am having problems today connecting to just one website which I use daily.
    I get the "internet explorer can not display the webpage" message and the dropdown gives the usual possibilities.
    If I put the web address into "isitdownforeveryone or just me" then that reports the site up and running.
    I cleared all temp files/cookies, ran a full disk clean and cleaned all in IE that was cleanable. I did the ipconfig /flush DNS command and netstop and net start DNS cache commands and still no joy.
    While I kept trying I accidently clicked on the "diagnose problems" on IE failed to display page message and that said something like that "the host server at address 290.xxx.xxx etc had been found but fails to respond when pinged" and that resetting the network can fix problems. I then reset the BT Home Hub and low and behold I had instant access to the problem site. That was OK for the rest of the time the PC was on.
    This evening it has done exactly the same (just this one particular site down) and yet resetting the router has again fixed the issue.
    Why is this happening all of a sudden and why just seemingly one site affected ? Is it something I should contact BT over ?
    I run Vista and IE9.
    thanks 

    Thanks for all the replies folks...
    I haven't tried another browser (I like IE and didn't want to install something I don't really want) but I could do to aid trobleshooting if needed (I use Acronis so can roll back).
    Anyhow after all the trouble yesterday I unplugged the HH rather than doing a "soft" reset via the button. The site that was problematic is at the moment OK.
    If a site is unobtainable for whatever reason why does a reset of the HH "find" a path to the site only for it to fail again.  
    I see others have had similar issues although Bing.com is one I do use and that has been fine for me.
    Whether this is related or not I have no idea but after all the resetting of the HH i thought I would just try Speedtest.net to make sure my line profile hadn't suffered. The "ping" value was a little higher than normal but what was was odd was that the server automatically chosen to run the test was at the other end of the country rather than more local ones.   

Maybe you are looking for