Time Capsule (brand new) needed Firmware update, now issues still

I have just updated my firmware on the Time Capsule, (I did figure out why I was getting an earlier error on my Time Capsule when an error popped up that "Time Machine couldn't complete the backup to my TIme Capsule because the "backup image was already in use". I finally saw the number or exclamation mark (I forget) and it stated it needed a firmware update (wish it would download them automatically). After I did that though, I am backing up my iMac.
I have to take my iMac to Apple today in Tampa and drop it off to replace the HD per the replacement program of a recall so I have to make sure the backup is complete. I also want to make sure my iPHone is backed up and so I was told when I bought Time Capsule that it would also wirelessly sync up all my Apple wireless devices.
I was told to use Airport Utility, but that doesn't seem to work at ALL now and I'm not sure why. As of Feb. 7th, that was updated and it seems to have caused problems for many.
I am in v. 1.2 and just deleted it and added it back in.
How can the Time Capsule allow my iPhone to access it through Airport Utility? Was there a setting I am missing?
HELP with the Time Capsule backup, the iPhone (and then my daughter's iPod, my iPad and that's about it) backing up wirelessly through Airport Utility.

Your idevices do not backup directly to the TC.. nor does the Airport Utility do anything but setup the TC.
Time Machine is the backup for the Mac.
The devices like iphone are backed up to itunes or cloud..
The itunes is then backed up by TM to the TC.. so it is indirect.
See apple doco on back of iphone for instance. http://support.apple.com/kb/ht1766
Let me also suggest you do a disk image of the mac. You will find this is much easier to recover your working mac from.. in fact get a USB drive is even better and download superduper.. you can do free disk images from it, but they can also be done from disk utility. Make a bootable USB drive which is an image of your existing internal drive. That can be easily restored to the Mac when you get it back.

Similar Messages

Problem with new Time Capsule w/ 7.5 Firmware Slow Speeds on 802.11b/g

I purchased a new 1TB Time Capsule with v. 7.5 Firmware last week. This Time Capsule is replacing a first gen 500GB TC with Firmware v. 7.4.2. I have 2 Macbook Pros connecting to the new Time Capsule via 802.11n at 5Ghz and 2 iPhones and 1 first gen Mac Pro connecting to it via 802.11b/g at 2.4Ghz. The Macbook Pros connecting at 5Ghz move data fine. The connection is very fast. Speedtest.net average about 20Mbps down and 2Mbps up. The devices connecting on the 2.4Ghz radio are slow as molasses. They test at less than 30k down and 30k up. Beyond that they have trouble moving data around the LAN as well. There are no sources of major interference near the TC. In fact the TC is in the same location as the old unit which was also running at 2.4Ghz with no problems. I contacted Apple tech support and then went to a local Apple store for an exchange. They gave me another new TC but the problem persists with the new units as well. This evening I took the new Time Capsule into the basement and isolated from any kind of interference with no success. I plugged in the old TC and the 802.11g devices were back up to speed.
Has anyone had any similar issues with the new AE or Time Capsule? I'm sure it's not unheard of to get two defective units but it's not likely. So I am thinking there may be an issue with the new firmware. I tried to downgrade to 7.4.2 but the new units require 7.5. Any suggestions? All network settings are the same as they were with the previous Time Capsule. The only thing that's changed is that both the 2.4Ghz and 5Ghz radios are active.

Hi there,
got some problems with Time Capsule and 7.5 Firmware as well. Since it is my first device, I have no experience with older firmwares or models though.
It is impossible to connect to the 5GHz network. Neither when I have 5GHz and 2.4Ghz in one network or when I set a separate network for the 5GHz.
I always get a timeout message, I also tried deactivating the guest network and I also tried without any password, just would not connect to the 5GHz. By the way, I am sitting 50cm away from the TC and of course, I do have a MacBook Pro that supports 802.11n standard, a brand new MacBook Pro 13.
So, any ideas? I'm going to call Apple on Monday, can't check if it's the notebook, cause I do not have a second device to test ist. My iPhone works fine (802.11g), the 2.4Ghz also works fine with rates around 130-145 usually when close to the TC.
I also noticed that my MacBook Pro won't connect to the 802.11n when compatibility with 802.11b/g is activated. Then it runs with 802.11g instead....
pretty annoying, thought this would work right away?!

How big a Time Capsule do i need, I'm totally new to Mac!

Hi, how big a Time Capsule do I need in order for it to work as my backup? Let say if I bought an Imac with 2 TB HDD + 256 GB SSD and with that, bought a 2 TB Time Capsule for backup, would that be enough or would I need to buy a 3 TB Time Capsule? Thanx!

But if I buy the Imac I wrote about in my previous question (2 TB HDD + 256 GB SSD), would I then need to buy two, 2TB Time capsuls,
If you plan to fill up most of the space on the iMac right from the start, then you might need more space. Few users ever use more than about 75-80% of the space on their computers. I was figuring you would fill up about 75% of the drive....around 1.5 TB or so. 3 TB backup would be about right.
If I buy 1 TB HDD + 256 GB SSD, then 2 TB Time Capsule will be enough, right?
Correct.

How to remotely access Time Capsule using iCloud and firmware 7.6.1?

I have just applied the new Time Capsule 7.6.1 firmware that supposedly enables remote access to the drive via iCloud. However, how precise would this work?
I have read several other threads here and elsewhere but they either explain how to do this using MobileMe or DynDNS.
How precisely does iCloud now translate my internal IP to an external one and where do I access my drive in OSX when on the road?

Really pretty simple. That's if you've got the Time Capsule and your Computer set up correctly.
Time Capsule setup:
1.    Open Airport Utility
1a. Open Time Capsule Base Station tab
1b. Put iCloud NAME in "Back to My Mac"
1c. Enter Password, then wait for activation (less than 1 minute normally)
1d. Open Time Capsule Disks tab
1e. Check mark "Enable file sharing"
1f.   Check mark "Share disk over WAN"
1h. Password self explanitory
Computer (Mac)
1.   Open iCloud in System Preferences
2.   Put a check mark on "Back to My Mac", wait for actication (less than 1 minute normally)
Connecting to Time Capsule Disk from you HOME network or outside your home network ((INTERNET))
In order to connect to Time Capsule Disk off your local (home) network you must have an internet connection, if you do then do this:
1. Open Finder
2. In Finder open Shared if collapsed and double click on your Time Capsule name.
3. Double click your Time Capsule, enter password (if you required).
4. Once connected to your Time Capsule double click on your Disk to mount it enter password (if your required).
5. Done, remember the connection speed is dependent on your internet quality (broadband vs dial-up).

Airport Time capsule internal drive need repair

Airport Time capsule "internal drive needs repair". brand new out of the box.
ModelA1470 Running one newish mac mini mountan lion. Airport utility 6.3
Also I can not enter the serial number into web site so I can't get help

Take it straight back to the store for replacement. It is faulty.. there is no fix you can do from outside. Even if there was, I would still say it is Apple's problem.. and a disk should never go bad in that length of time..
You would think after the debacle with Seagate drives in the imacs they would never touch them again.

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and Power Book

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and MacBookPro

It is generally better to leave the old backups and start again.. unless there is something you particularly need.
But if you desperately want all the old backups you have to copy the sparse bundles.. this will take very long time as it must copy via the computer..
http://pondini.org/TM/18.html
Take particular note of the initial comments.. ie before you read how to do it.. don't do it.

I was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

i was using time capsule to extend a network. now i want it to be the primary base station. how do i convert this?

Thanks for the info. Since this is a cable modem, you will need to fully reset it so that it will associate correctly with the Time Capsule when it is reconnected.
I don't have the manual for your Ubee model handy, but most modems will reset if you power them down completely. That means pulling the power cord from the back of the device or unplugging from the wall. Leave the modem powered off at least 30 minutes...longer will not hurt a bit.
Next, perform a Factory Default Reset on the Time Capsule per this document:
Resetting an AirPort Base Station or Time Capsule FAQ
After the modem has been powered down and Time Capsule has been reset, connect an Ethernet cable from the modem to the WAN port (circle icon) on the Time Capsule.
Power up the modem and let it run for 2-3 minutes by itself
Then power up the Time Capsule and let it run a minute or two
Next, open AirPort Utility and configure the Time Capsule to "Create a wireless network". Let us know what operating system you are using on your Mac or PC if you have additional questions or need more details on this.

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??

Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage.

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?

can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

How do i transfer files from time capsule to new computer?

I recently lost my vintage Imac hard drive and to top it off, likely had a faulty OS. Good news is I have a time capsule, bad news is it is also suspected to have the faulty OS. The Imac is history and I currently have a macbook pro with Lion OS installed and now I want to retrieve all my files off the time capsule. I was told to simply "drag and drop" the files from time capsule to my new macbook. apparantly not so simple. I see the the drive in finder and a lonely folder which I am seemingly unable to do anything with. any suggestions?

Drag and drop is not the way to go. Run Migration Assistant, found in your Applications/Utilities folder on the Macbook Pro. Follow prompts to recover information from a Time Machine backup, and point it to the Time Capsule.
Note that the recovery will recreate your old user from the iMac. You will have already set up a user on the MBP, but the files will not go into your new user - they'll go into your old user. Once you log out, you'll see your old user appear as a login option.
Matt

I have 1TB time capsule and i need to back up more media. Can i also use a 3TB time capsule asswell?

i have 1TB time capsule and i need to back up more media. Can i also use a 3TB time capsule asswell?

You can, but it is not possible to continue backups "seamlessly" from one Time Capsule to the other.
Time Machine will make a new complete backup of each Mac on the first pass when you connect the new 3TB Time Capsule.

Does the airport time capsule eliminate the need for my cisco linksys wireless router?

does the airport time capsule eliminate the need for my cisco linksys wireless router?

I understand that your network now looks like this:
Modem > Security Router > Cisco/Linksys router > Devices
If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
Modem > Security Router > Time Capsule > Devices

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but can't type. If I restart, everything is fine again. Is there anything that will fix this problem?

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but I can't type. If I restart, everything is fine again. Is there anything that will fix this problem?
Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor. The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz. If I use HDMI to VGA input, the image is much clearer. Is there a way to get the Displayport to work?

I'm having exactly the same keyboard issue. Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
I'm seeing a great many devicemgr and rake errors in my system log. I don't know if they're related. How 'bout you?
If you're unfamiliar with the system log…
Open /Applications/Utilities/Console.
If necessary, choose View > Show Log List.
system.log is at the top of the FILES section.
Try searching it for hot words like DEBUG, FATAL, and aborted.
I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
-Bryan

I ruined my Samsung Galaxy s4 (water damage) I have a Samsung Galaxy s3 I wanna use for the time being cuz I need a phone NOW...how do I do it?

I ruined my Samsung Galaxy s4 (water damage) I have a Samsung Galaxy s3 I wanna use for the time being cuz I need a phone NOW...how do I do it?
Anybody know where I can start with this? I was just gonna call in and ask a tec but duh...I don't have a working phone? Is there a link with step by step instructions?

It worked! I did put my SIM card into my replacement phone and Sha-Zamh lol! There are ez instructions as well when I logged into my Verizon acct. I clicked on "My device" then "switch my device" and followed just a few simple steps, with the final being switchin the SIM card, like you suggested. I think Verizon has to know what I was doing. In order for this to be a success I needed to obtain my "something something number" which is located on my phone (the one I was switching over to) Anyway, I appreciate your help, it led me right to where I needed to be, Thanks!

Time Capsule (brand new) needed Firmware update, now issues still

Similar Messages

Maybe you are looking for