Time Capsule Can't delete a sparsebundle

i have a time capsule which i used to backup 3 macs. but having 3 macs eventually filled it up completely and now i am backing up the macs on other separate time capsules. but on my original time capsule, i find i still have the old sparsebundles for the backups of the other macs there.
i just tried dragging one to trash since it was huge (500GB!) and a window popped up saying preparing to delete, and then it said it couldn't delete it because some item 'bands' is in use.
how can i force delete this sparsebundle? am i forced to reformat the whole thing, even losing the backups of the single machine i'm still using it for?
thanks in advance!

Plug your TC into your computer by ethernet.
Change it to bridge mode.
Update the TC.
Plug it by ethernet into your dad's TC LAN port.. to any port on your TC although by convention we use WAN.
Now check again when you connect by wireless to your dad's network.. or ethernet direct to your TC.. it should come up and be accessible.

Similar Messages

TS1253 Once I save my photos to the airport time capsule; can I delete them from the computer drive?

Once my photos have been saved by the airport time capsule can I delete them from my computer hard drive.

Please think about this for a moment.
If you move your images to the Time Capsule...and delete them from your computer's hard drive......then, the only copy of the images that you will have will be on the Time Capsule.
So, now your "originals" are on the Time Capsule....since you deleted them from the computer's hard drive to create more space.
When...not if....the Time Capsule has a problem and you cannot access your images.......where will your backups of your images be?

How can I close my Time Machine Sparsebundle so Time Capsule can do a scheduled backup?

"Time Machine couldn't complete the backup to "Your Time Capsule". The backup disk image “/Volumes/Steven Weinberg's Time Caps-1/Steven Weinberg’s MacBook Pro (4).sparsebundle” is already in use."
I have both a Time Capsule and a 2Tb external drive using Time Machine to back up my laptop.
Is it as simple as when the Time Capsule goes to do a backup and finds that the other drive is in the midst of using Time Machine to do its backup that I get this notice on my desktop?
It's 10:30 AM now. The last Time Capsule backup was almost 12 hours ago.
There have already been 6 Time Machine backups today on the 2nd drive.
Sounds like the Time Capsule really is being blocked from doing its job.
THe 1 Tb Time Capsule backs up to a .sparsebundle document which fills the Time Capsule at 985 Gb. You can't open and peek inside the .sparsebundle backup file.
The other drive backs up to a .backupdb folder within which are subfolders for each backup which appears to be a complete recreation of thebacked-up 500 Gb hard drive on my MacBook Pro laptop. And even though there are 37 separate folders with backups going back to Sept 2013 when I installed the second backup drive, it's only used about 500 Gb of its 2 Tb capacity.
1. How can I solve my primary problem of freeing up the .sparsebundle file for the Time Capsule?
2. Since both drives are using Time Machine to do the backup, why are they producing such diffrent backup file structures?
Steve

David Bean wrote:
So copying from a one-week-old TM volume was failing
Have you run Repair Disk on it?
I now realize that the folder in which the problem file(s) are stored on the backup,.DocumentRevisions-V100, is the folder in which OS X stores its versioning data for all users. I am now trying to work out whether I can safely delete these files from the backup
That does get damaged on occasion. I haven't seen it in quite a while, so it's pretty rare.
You can delete it from the backups, via the TM interface, but you must be able to show invisible items).
First, open the Terminal app (in your Applications/Utilities folder). Be very careful with this app. It's a direct link into UNIX, the underpinnings of OSX, but without the protections of OSX.
In Terminal, the prompt looks like this: <Computer Name>:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor.
Copy, do not type, the following after the prompt:
defaults write com.apple.finder AppleShowAllFiles 1
and press Return.
You should just see the prompt again.
Then see Time Machine - Frequently Asked Question #12 to delete all the backups of it.
and from the live system filestore so they don't get copied out to a backup again.
Yes. You will, of course, lose all previous versions, but since the file is corrupted, you may have lost some, most, or all of them already.
When done, run the same command to hide the invisible items, but replace the "1" with a zero.

Time Capsule - can you recover deleted files?

I've been using my time capsule as a external hard drive to store some files, I have recently purchased a mirrored external hard drive to store them on, and in the transfer some of the files that were stored on the Time Capsule have gotten deleted, prior to being fully transfered. Is there a way to run a recovery software on the time capsule?

No, you cannot do anything as the disk is a network drive.. you have to remove the disk and plug it into the Mac using a USB to Sata holder for instance.. and use the recovery software there.

The item can't be moved because AirPort Time Capsule can't be modified

have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks

pooldoc58 wrote:
have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks
How are you trying to add files??
You cannot add them to the TM backup?
TM owns the sparsebundle and you should not add files to any sparsebundle.. do not even attempt to.
You can create a new directory in the Time Capsule and copy files to that.. as long as you have turned on file sharing and give correct access permissions.
Mixing data and backups does have consequences though.
See Q3 here.
http://pondini.org/TM/Time_Capsule.html

Time Capsule "can't be found" as a hard disk in Snow Leopard

I've had a Time Capsule for a year and a half. No problems until I installed Snow Leopard.
Time Machine seems to work fine, my backups proceed regularly, but if I try to actually mount the hard disk and upload or download files from the drive, I can't. The path "My Computer/Network/Time Capsule" shows up in a Finder window, but when I click on the icon for the Time Capsule drive, it says "The alias 'My Time Capsule' can't be opened because the original item can't be found." I can "Delete Alias", "Fix Alias..." or "OK".
Clicking on Fix Alias leads to the file selector dialog box. If I select the drive, it claims that it is already connected. So the only available option in the dialog box is "cancel".
Clicking on Delete Alias gives the error message "The item 'My Time Capsule' can't be moved to the Trash because it can't be deleted."
Clicking on OK, naturally, accomplishes nothing.
I tried going to Disk Utility and repairing disk permissions and rebooting. Nada.
I tried connecting directly to the Time Capsule via ethernet. Didn't make a difference.
Help!!!

I'm having the same problem. Internet connection is fine; backups work correctly. But I get a message telling me there's an update I should install for Time Capsule, and when I click to install it, it tells me it can't find the hard drive.
I also can't print, although my printer driver is installed and the image of the printer appears. My printer is connected to the Time Capsule.

"Time Machine can't back up - sparsebundle error 1" question

Hi,
I'm getting the "Time Machine can't back up - sparsebundle error #1" message, and am trying to see if the fix posted below is the answer:
http://support.apple.com/kb/TS2048
So, when I installed Time Capsule, I gave it a password ("network password").
Fairly recently, I renamed the Airport. Now the Airport disk password and Airport base station password are the same as the network password, and the Airport network password is different.
Is this what the Apple support message I referenced is getting at? Are these passwords supposed to be the same... ???
Thanks for any help,
reluctantuser

I'm not sure what you mean by "We also used the Time capsule as a hard drive for backing up." after you've already mentioned that you use Time Machine to back up three Macs to the Time Capsule.
Check this Web page for advice on the space issue.

HELP- what does this mean- time machine error- backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?

HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html

I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

Time Capsule can't be find anymore

Hi all,
I've a Time Capsule within a shared office WiFi.
Unfortunately the office Wifi crashed & we had to set up a new one (with a new name & pw).
My problem:
My Time Capsule can't be find anymore over the AirPort service programm. Whether by
wifi or by ethernet.
Does anyone have an idea how I can to update the Wifi-connection in my TC?
Thank you in advance.

This has to be reset.. you have no choice if the setup was join a wireless network, because it is completely locked out from wifi and from ethernet.
Plug into a computer by ethernet and do a full factory reset.. nothing on the hard disk is lost just the router settings.
Factory reset method.. hold in reset then power on the TC.. keep holding in reset and wait about 10sec until the front LED starts flashing rapidly.
It is much better to plug the TC into the main router by ethernet and run it in bridge mode.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

I have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

i have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

Open the airport utility.
Click on manual setup.
Click on advanced.
Click on Logs and Statistics.
Click on Wireless Clients
Voila!!

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

In time capsule, can ethernet ports used for windows pc as a LAN?

in time capsule, can ethernet ports used for windows pc as a LAN?

i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

Time Capsule Can't delete a sparsebundle

Similar Messages

Maybe you are looking for