Time Capsule can't import

I have Apple Time Capsule 3TB, the internet set up fine, but I can't copy files into my hard drive. I don't want to use the 3TB as a time machine, but just a separate external hard drive. When I drag files into it, it would ask to authenticate with admin & pw, but there is no location to do so. I tried different setting for the Disks, under "Secured Shared Disks--with accounts, disk passwords, devices passwords..etc" None of the setting would work.  I even restart my TC. This capsule worked before with my old Mountain Lion, but it's no longer work with my new Yosemite 10.10.2. Is it the operating system or I don't have my settings set correctly?

Stock standard Yosemite.
Mount the TC disk manually in Finder.
Use Go, Connect to server from the top menu.
Type in SMB://10.0.1.1 (replace with the actual IP address of the TC which you can get from the airport utility)
When it discovers the resource you will be asked for a  password.. type in your disk access password to the TC and don't forget to save it to the keychain.
If it doesn't work .. factory reset the TC and start over.
Here is the long version.. since I post the same stuff a dozen times a day now.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ

Similar Messages

  • The item  can't be moved because AirPort Time Capsule can't be modified

    have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
    "The item  can’t be moved because AirPort Time Capsule can’t be modified"
    how do i change this
    many thanks

    pooldoc58 wrote:
    have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
    "The item  can’t be moved because AirPort Time Capsule can’t be modified"
    how do i change this
    many thanks
    How are you trying to add files??
    You cannot add them to the TM backup?
    TM owns the sparsebundle and you should not add files to any sparsebundle.. do not even attempt to.
    You can create a new directory in the Time Capsule and copy files to that.. as long as you have turned on file sharing and give correct access permissions.
    Mixing data and backups does have consequences though.
    See Q3 here.
    http://pondini.org/TM/Time_Capsule.html

  • I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

    Time capsule has been working perfectly for months.
    Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
    Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
    I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

    What OS are you running??
    It is very typical Yosemite issue.
    1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
    From my screenshot you can see the TC address is 192.168.2.57
    It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
    2. In Finder use Go, Connect to server.
    Type in SMB://192.168.2.57 (replace with IP you discover).
    If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
    This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
    Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

  • Time Capsule "can't be found" as a hard disk in Snow Leopard

    I've had a Time Capsule for a year and a half. No problems until I installed Snow Leopard.
    Time Machine seems to work fine, my backups proceed regularly, but if I try to actually mount the hard disk and upload or download files from the drive, I can't. The path "My Computer/Network/Time Capsule" shows up in a Finder window, but when I click on the icon for the Time Capsule drive, it says "The alias 'My Time Capsule' can't be opened because the original item can't be found." I can "Delete Alias", "Fix Alias..." or "OK".
    Clicking on Fix Alias leads to the file selector dialog box. If I select the drive, it claims that it is already connected. So the only available option in the dialog box is "cancel".
    Clicking on Delete Alias gives the error message "The item 'My Time Capsule' can't be moved to the Trash because it can't be deleted."
    Clicking on OK, naturally, accomplishes nothing.
    I tried going to Disk Utility and repairing disk permissions and rebooting. Nada.
    I tried connecting directly to the Time Capsule via ethernet. Didn't make a difference.
    Help!!!

    I'm having the same problem. Internet connection is fine; backups work correctly. But I get a message telling me there's an update I should install for Time Capsule, and when I click to install it, it tells me it can't find the hard drive.
    I also can't print, although my printer driver is installed and the image of the printer appears. My printer is connected to the Time Capsule.

  • Time Capsule can't be find anymore

    Hi all,
    I've a Time Capsule within a shared office WiFi.
    Unfortunately the office Wifi crashed & we had to set up a new one (with a new name & pw).
    My problem:
    My Time Capsule can't be find anymore over the AirPort service programm. Whether by
    wifi or by ethernet.
    Does anyone have an idea how I can to update the Wifi-connection in my TC?
    Thank you in advance.

    This has to be reset.. you have no choice if the setup was join a wireless network, because it is completely locked out from wifi and from ethernet.
    Plug into a computer by ethernet and do a full factory reset.. nothing on the hard disk is lost just the router settings.
    Factory reset method.. hold in reset then power on the TC.. keep holding in reset and wait about 10sec until the front LED starts flashing rapidly.
    It is much better to plug the TC into the main router by ethernet and run it in bridge mode.

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

    Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.  

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • I have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    i have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    Open the airport utility.
    Click on manual setup.
    Click on advanced.
    Click on Logs and Statistics.
    Click on Wireless Clients
    Voila!!

  • If i connect an external hard drive to a time capsule, can i access this drive via internet?

    If i connect an external hard drive to a time capsule, can i access this drive via internet?

    If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
    See remote access here.
    https://discussions.apple.com/community/wireless/airport?view=documents

  • In time capsule, can ethernet ports used for windows pc as a LAN?

    in time capsule, can ethernet ports used for windows pc as a LAN?

    i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

  • I just purchased a new 21.5 iMac and would like to copy my iPhoto from my old iMac's time capsule can anyone help me ?

    i just purchased a new 21.5 iMac and would like to copy my iPhoto from my old iMac's time capsule can anyone help me ?

    You might consider restoring to factory specs, as detailed in the booklet that shipped witht the machine, using the Setup Assistant on first boot, and then reinstalling those new programs. i've not moved pictures, so you could always give that a shot.

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • TS1253 Once I save my photos to the airport time capsule; can I delete them from the computer drive?

    Once my photos have been saved by the airport time  capsule can I delete them from my computer hard drive.

    Please think about this for a moment.
    If you move your images to the Time Capsule...and delete them from your computer's hard drive......then, the only copy of the images that you will have will be on the Time Capsule.
    So, now your "originals" are on the Time Capsule....since you deleted them from the computer's hard drive to create more space.
    When...not if....the Time Capsule has a problem and you cannot access your images.......where will your backups of your images be?

  • I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    A universal may work but reliability tends to be poor..
    You are much better using another airport .. extreme or express.. even a second hand older one.
    Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

  • Airport Time Capsule Can't Connect to BrightHouse Internet

    I have BrightHouse Internet service set up as follows:
    1.  Coax in
    2.  Splitter
    3.  Coax out to ARRIS modem/telephony combo (BrightHouse box) and Motorola Surfboard (BrightHouse box, for high speed access)
    4.  Cat 5 from Surfboard to Netgear WNR2000 router.
    Note:  The modem setup and splitter were installed by BrightHouse.
    I want to replace my Netgear router with the AirPort Time Capsule (which to this point I have been using only as a backup drive for Time Machine).
    Currently, when the AirPort is connected to a LAN port on the Netgear, I get internet to the AirPort (AirPort Utility says so).  With this configuration I have the following settings on the AirPort:
    1.  Network - Off (Bridge Mode)
    2.  Wireless network - Off (the broadcast conflicted with the wireless signal from my nearby Netgear WiFi)
    3.  Internet connect using DHCP
    4.  IPv6 configure automatically
    I have tried various settings to get the AirPort connected, but never works.  The Airport Congifurations seem OK (green light in AirPort utility), but the Internet connectivity when plugged into the port on the back of either modem is absent (yellow light in AirPort Utility).
    I've done all of the obvious stuff (made sure the ethernet cables are plugged into the proper ports, hard reset the Airport Time Capsule, reset both modems (even in very specific order).  No luck.
    Does anyone know if there is an issue with BrightHouse and AirPorts?

    Did you power down the modem and leave it off for at least 20min.. plus or minus.. say try 5min or try overnight.. but all cable services require the modem powered off so you can swap the router. That is because the first device to connect captures the public IP and is registered by MAC address to the ISP system. To get rid of that you need the modem off long enough for dhcp lease to reset..
    You also should factory reset the TC to do this. It is really hard to change roles on the TC by simple manual changes. Start afresh. None of your backups will be altered.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    After a reset the TC will go back to router default mode.
    Everything else on the network will also need rebooting. This is important to change over to the new router.
    Tell us how you go.
    If you still have issues what model TC running what firmware??

Maybe you are looking for

  • Time Machine and File Permissions

    'Twere I to rate this question's technicality on a scale of 1 through 10, it would rate 8. Just warning you. Unix people will be especially useful for this. Okay, so, before the problems started, my hard drive had three partitions. One for OS X, one

  • How to locate the POV intersections where Custom Document is linked to

    Hi Experts, My customer tried to delete a custom document in HFM, and received an error message saying that the document is linked. Unfortunately, he does not remember what the POV intersections were? Is there a way to find out the POV intersections

  • Payment Card Functionality

    Hello all, I need some documentations on Payment Card Functionality in Travel management in SAP. Is there any specific procedure for country specific. If any do let me know that. Appreciate with point on quick response. Please need this on an urgency

  • HT1177 how to restore itunes library?

    after reinstalling computer's system i can not restore the itunes library. in the capsule i can find specific song or album but dont find the way to the library. any body?

  • Error in fdm web logon

    Hi, I am trying fdm web login but its throwing error saying: 1.Primary Load Balance Server is unavailable -- attempting to use Backup Load Balance Server 2.Load Balance Server is not responding Regards, Sudheer