Time capsule compatible with Plusnet Wireless...?

Hi there
I am thoroughly confused - my home wifi comes from Plusnet Wireless and al I want to know is ... will the Time Capsule work on Plusnet?
Cheers!

Does the Plusnet router have ethernet.. if so plug the TC WAN port to the LAN port of the router.. and set the TC up in bridge mode.
If the Plusnet is wireless only your doomed!!
TC can join a wireless network but it is really poor.
So please explain and we can work from there.

Similar Messages

Is the time capsule compatible with a wireless printer

I am trying to use my HP wireless printer with the time capsule. It is not working. Is it compatible?

Yes, it should be ok..
BUT the rest of the WORLD speaks SMB.. as in fact does iOS.. and so you need to make things look nice to SMB.. in other words windows type networking.
By default the TC seems to end up with names which are wrong..
Use short names with no apostrophe.. or any other special character.. pure alphanumeric.. no spaces..
Passwords also .. nothing more than 20 characters.. names do not need to be long, 8-12 pure alphanumeric is plenty.
eg I name my TC.. TC
Name 2.4ghz wireless, TC24ghz
Name 5ghz wireless TC5ghz (I recommend this to keep them separate and prevent auto swapping)
Lock the channel (This is optional but I find helps stability.. mainly for 2.4ghz.. there are three channels.. 1, 6, 11) Try each channel in turn.
Plug the printer into the computer by usb and run through the setup.
Put the wireless into infrastructure mode and put in the wireless name and security settings and passkey.
Complete the printer setup wizard and then disconnect the usb.. it might well be a good idea to restart everything.. Make sure the printer is in a position where there is good wireless signal.
Now what I found happens is the printer driver is confused by the fact you had it plugged in by usb. So see if the printer is accessible now.. if not delete the printer and start again.. it should pick it up now as a network printer.
I don't know what model printer you have so to get all the specifics right read the instructions.. You know that old saying.. when all else fails.. and after you post on the forum.. actually read the instructions.

It´s Time Capsule compatible with 10.7.2 Mac OsX Lion and iOS5?

Hi. I want to buy Time Capsule of 2TB but.. it is compatible with Mac OSX Lion MacBook Pro Middle 2009 and with my iPhone 4 iOS5?

As far as backing up your Mac, yes it is. Time Capsule serves no purpose as far as backup for the iPhone though. It will give the iPhone a wireless signal though, using dual band technology. iPhone backups must be done through iTunes or iCloud.

Time Capsule Interfering with office wireless

I would like to setup my Time Capsule to be able to do my backups and to print to two different printers. Today the IT guy said that I will not be able to use my Time Capsule as Wireless Router to get to the internet because it is assigning an IP address (10. something) that is interfering with the other router in the building.
Is it possible to still use my Time Capsule to print to the two printers (one USB and one network) and do my backup wirelessly without having the TC interfering with the wireless network? I don't need the TC to get to the internet.
I just got a replacement TC from Apple because the old TC died. I had the old TC connect printing to both printers and performing backups but it was connecting to the internal network and it was a hotspot. It was the only hotspot in the office for over a year but within the last year a few wireless routers were placed throughout the office. The wireless routers were knocking individuals off a lot and the IT guy could not figure out what was wrong. I guess when I hooked the new TC the last night it knocked out both the wireless routers and also the main router. Once they unplugged my new TC all routers came backup.
I hope I can still use the internal network cable but not create an access point to the internet.

Does the Plusnet router have ethernet.. if so plug the TC WAN port to the LAN port of the router.. and set the TC up in bridge mode.
If the Plusnet is wireless only your doomed!!
TC can join a wireless network but it is really poor.
So please explain and we can work from there.

Is there a way to make the Time Capsule compatible with the iBook Clamshell (2000 not 1999)?

We upgraaded our router to the new time capsule over christmas break and it works great but our old ibook clamshell doesnt work with it. is says an error has occured when i try to connect to it.
Is there someway to connect the Clamshell?
Thanks!

What type of security is defined for your wireless network? I may be wrong, but I don't believe that the AirPort Card supports anything better than the very weak WEP encryption. It also only works on the 2.4 GHz band. I'm presuming you configured the Time Capsule to support that band.

Is the time capsule compatible with thunderbolt?

Thinking of getting a new iMac for Xmas and the 3 TB Time Machine with builtin router. My question is can I connect the new Time Machine to my Mac via the thunderbolt port and access my data even faster?

Gigabit ethernet is way faster than the data can be streamed off the hard disk. Typical hard disk speed can be seen in the review here.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7
Just over 80MB/s is well within gigabit capability.

Is the 3 TB AirPort Time Capsule compatible with PC?

I'm in the process of converting over to Mac from PC and I need to transfer all my files (over 2 TB worth) from my Sea Gate external harddrive to an Apple compatible one. If I buy a Time Capsule first, is it possible to hook it up to my laptop (PC - Toshiba) to get everything from the other external harddrive?

Yes you can transfer your files between drives.
Better still, if the Seagate external drive supports USB, you can also just connect the drive to the USB port on the Time Capsule. Most likely, you will need to reformat this drive if it currently formatted in NTFS to HFS+ if you go this route.

Is time capsule compatible with pc

Wanted to use it with Apple and PC products. Was wondering if there is a program one can get to use Time Capsule with the PC side of the house?

Was wondering if there is a program one can get to use Time Capsule with the PC side of the house?
If you are asking about a backup program here, you might want to take a look at Genie TimeLine Pro, which is similar to Time Machine.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...

Is the new AirPort Time Capsule compatible with a fibre optic modem?

I will be having fibre optic set up in my new home. The new AirPort Time Capsule states that it si able to connect to cable or DLS modem for internet access. Will I be able to connect this device to a modem designed for fibre optic internet?
Many thanks
CS

Yes. All it needs is a modem (cable, fiber, satellite, DSL) with an Ethernet output (not USB).

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard 753S Mobile Hotspot)??

will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??

Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible.

Time capsule functionality through a wireless connection (Airport Express)

Hi all,
I've searched through quite some topics though i did nog find an answer to this probably easy question. Either it was to technical for me or i just did'n look that good...
Can i connect a time capsule through an existing wireless network (newly bought airport express) and use all functionality from the TC? For example the dual network possibility. (2.4 GHz and 5 GHz), connecting the TC to a printer via USB, connecting desktop computer through an ethernet connection. etc, etc,
So the set up would be the following:
1. Airport express downstairs connected to the modem from the internet provider
2. Upstairs 2nd floor, TC wireless connected to the airport express.
Hope you can help!
grt Walter, (from the netherlands)

Your express is a G wireless model and not compatible with the N wireless TC.
You can use it but only by using it with ethernet and setting it up as AP.. you also need to use 5.6 utility not v6.. apple removed support for G wireless devices from v6.
LOL..
I was 2min late.

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

How do I make airport time capsule work with Linksys cisco router?

Hi all.
I bought an airport time capsule 3T and want to connect it to the internet, using a macbook with OS X 10.9.2. Currently I am using a Linksys Cisco router model WAG54G2.
I followed the steps of the setup airport guide: Connected the WAN port of the airport with an ethernet port on the router, plugged in the power cable, filled in the internet username and password. In Airport Utility I can see the airport and the internet icon, both with green dots most of the time. But it seems to disconnect every minute or so, green dots turning orange and the status light on the airport flashing orange. The internet light on the linksys also goes on and off. When the internet is on, it is quite slow.
Advice is welcome!
Kees

No guarantees here. AirPort Utility 6.3.1 is a big drop down from the 5.x versions in Leopard and Snow Leopard.
Hold in the reset button on the back of the Time Capsule for 9-10 seconds and release
Allow a full minute for the TC to restart to a slow, blinking amber light
Click the AirPort icon at the top of the screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on Time Capsule.
The example below shows an AirPort Express. You will see Time Capsule.
As soon as you click on the Time Capsule, AirPort Setup will open up automatically and take a minute to analyze the network....and probably suggest that the Time Capule will be configured to "extend"....which is wrong.
Click the Other Options button at the lower left
Click Add to an existing network
Next to Connect To.....select the wireless network name from the drop down list....if it appears. Otherwise type in the exact name of the wireless network.
Click Next
Confirm any settings again and wait to see if AirPort Utility 6.3.1 will allow the Time Capsule to join the wireless network.
You have about a 1 in 5 chance that this will occur.
Post back on your results.

Time capsule compatible with Plusnet Wireless...?

Similar Messages

Maybe you are looking for