Time Capsule connecting to a Wireless Booster.

Hello, my first post on the boards and am also a Mac newbie.
I'm a recent Mac convert and pretty much have all the kit now. Previously I was using my T/C as a wireless network and backup device. I had an ethernet connection and everything worked fine.....
I'm currently deployed in Southern Iraq and my new location doesn't have an Ethernet connection. I'm writing this on my work Laptop using a Light Wave USB wireless booster as my room is too far way from the router.
I have two problems I would like to fix if possible.
1)I would like to set up my Mac to use the booster however the Mac wont run the CD that came with the USB booster so I can use it as my internet connection. Is there a way to install a driver on Mac to make this work?
2) I understand that the USB port on the Time Capsule will not allow USB modems so I assume that the booster will not work directly. If I can get an adaptor that will turn the USB into an ethernet connection, is it possible to install a driver on the T/C to use the booster to draw the internet from the wireless network?

Hello lovey80. Welcome to the Apple Discussions!
1)I would like to set up my Mac to use the booster however the Mac wont run the CD that came with the USB booster so I can use it as my internet connection. Is there a way to install a driver on Mac to make this work?
One option would be to get someone else to download the driver for you, and then, connect both devices using an Ethernet crossover cable to transfer the file to your Mac Pro.
2) I understand that the USB port on the Time Capsule will not allow USB modems so I assume that the booster will not work directly. If I can get an adaptor that will turn the USB into an ethernet connection, is it possible to install a driver on the T/C to use the booster to draw the internet from the wireless network?
Sorry, but this just wouldn't work. The TC does (natively) allow it to join another wireless network, but only as a client. It can also extend another wireless network ... but only one created by another TC or AirPort.

Similar Messages

Time capsule connect to existing wireless network

Hi I was wondering if you need to connect time capsule via ethernet to your adsl modem. Can I get the time capsule to join an existing network?
This is because I want to put the time capsule in a different place than my adsl modem.
cheers

It is far superior to use ethernet and plug directly into the adsl modem.
You can join to wireless network.. the option is not available directly in v6 airport utility but is probably part of the setup wizard. I personally just use v5 utility where it is an option.. but you do need to hold the option key to select it.
BUT when you join a wireless network.. the TC loses its ethernet.. and wireless AP modes.. it is a dumb client on the existing wireless network.. the further away it is from the modem the slower it will go.. and double hop wireless will make it extra slow. Overall it is a bad setup.

HT1178 trying to make time capsule connect to a wireless network. How?

Hi! New mba, new time capsule. Trying to connect tc to existing wireless network. Can't find 'manual setup' or 'join wireless network', only 'extend wireless network', which results in the tc disappearing from my list of networks altogether. Help!

A TC is really not designed to join a wireless network and it is a really poor way to run it. It has always been a hidden option.. and now it is even harder to find.
For manual setup it is much easier to simply install 5.6 utility and then you can find and use TC any way you want. But please note the speed will be extraordinarily slow.. all packets will have to travel via the main router that supplies wifi.. to the TC.. you will lose all direct connection.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

Connecting two macs to time capsule 1.ethernet 2.wirelessly??

Hello All,
I am trying to solve a problem that I have already raised in a previous thread, but which got unnecessarily complicated. So here is the distilled version.
1. I have a a time capsule connected to my mac via ethernet, so essentially I am using it as a hard drive for backing up only. I want to maintain this connection as this imac is my main concern and for speedier back-ups are my priority.
2. I have a a second mac which I would to access time capsule wirelessly.
3. I already have a wireless network offered by an adsl modem/router.
Even though I would have thought it would be easy to have time capsule accessible to both imacs (one via ethernet and the other via the wireless network) I cannot actually achieve this. When I set up through Airport's assistant, establishing the ethernet link with the first imac results in the wireless mode being disabled and the second imac unable to see time capsule.
Any suggestions would be most welcome.
Many thanks.

Well when I investigate through Airport utility it reports that the internet connection is 'off: bridge mode', so I assume that it defaults to that when connecting through ethernet. However it also states that wireless mode is off, so presumably I need this mode on without interrupting the ethernet connection.
Also apologies for the typing errors in the original post. My grammar isn't that bad really.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

Plug in ethernet .. in the computer.. turn off wireless.

Time capsule functionality through a wireless connection (Airport Express)

Hi all,
I've searched through quite some topics though i did nog find an answer to this probably easy question. Either it was to technical for me or i just did'n look that good...
Can i connect a time capsule through an existing wireless network (newly bought airport express) and use all functionality from the TC? For example the dual network possibility. (2.4 GHz and 5 GHz), connecting the TC to a printer via USB, connecting desktop computer through an ethernet connection. etc, etc,
So the set up would be the following:
1. Airport express downstairs connected to the modem from the internet provider
2. Upstairs 2nd floor, TC wireless connected to the airport express.
Hope you can help!
grt Walter, (from the netherlands)

Your express is a G wireless model and not compatible with the N wireless TC.
You can use it but only by using it with ethernet and setting it up as AP.. you also need to use 5.6 utility not v6.. apple removed support for G wireless devices from v6.
LOL..
I was 2min late.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
Neighbour's wireless Router = Time Capsule = My Macbook
If I can please tell me how to set this up in details please. thanks for your time.
Message was edited by: Thomas Pink

You are trying to set up the Time Capsule as a Wireless Router
and Repeater? - To share an existing wireless network, wireless?
The AirPort Extreme was capable of repeating (like a transceiver)
to and from an existing wireless network, to expand upon it; but
only did this with another AirPort product, such as an Express.
The Time Capsule and many of its features are outlined here, with more
information: AirPort + Time Capsule: http://www.apple.com/support/airport/
You may have to direct your question regarding expanding an existing
wireless network, to the Discussions section for the specific products.
Usually, the "extend a network" wireless feature in the software setup
only applies to the use of a second Apple AirPort-type base station;
such as the Extreme, Express, etc. The compatibility is between the
AirPort-like Apple products; but a bridge could be made if an Express
were attached to the other wireless network via Ethernet cable, then
the Time Capsule may be able to see it. This would require testing.
Apple - Support - Discussions - AirPort (+ Time Capsule)
http://discussions.apple.com/category.jspa?categoryID=140
Good luck & happy computing!

Time Capsule Connection Help Needed (Flashing Amber)

Guys,
I've been trying to troubleshoot my Time Capsule connection for a week now and I have had zero luck.
I have a Imac with OSX 10.6.8 that uses AirPort v 5.6.1. I have a Cat-5 (ethernet cable) plugged from my Time Capsule port (looks like this <-->) into an available port in my cable mode/router. My Imac is also plugged into this router. The two cat-5 (ethernet) cables are side by side.
So....
Every time I plug in the Time Capsule I get the following prompt via AirPort.
AirPort Utility found a Time Capsule 802.11n (4th Generation) that is
reporting problems.
Time Capsule's Name : My Capsule
          IP Address: 10.0.1.1
          Versino: 7.6.1
          AirPort ID: 12:88:93:CC:FF:72
If this is not the AirPort wireless devise you want to setup you can select another from the list on the left. If you don't see it make sure.... Blah blah blah....
To make a long story tollerable I do see my Time Capsule on the left at the top. Its the only one and its selected by default. So I do the next logical thing right? I click "Continue" and AirPort reads the Time Capsule's configuration.... and then...... I get the error
An error occurred while reading the configuration.
Make sure your Apple Wi-Fi base station is plugged
in and in range of your computer or connected via
Ethernet and try again. (-6753)
Can anyone help me understand why I can grab the Time Capsule's IP Address but AirPort can not read the hardware's (Time Capsule) config?
I'm at a loss.
Could my ethernet cable be the issue?

Hackintosh,
Thanks man... Yes, I plugged it into the circle symbol with no joy. I also went to Wal Mart and baught a new seven foot cat-5 for $10. Again I still have the flashing amber light.
After plugging in the ethernet cable into the circle icon port AirPort returns the following prompt.
I reset the TC (ball point pen to the reset hole untill fast blinking amber light occurs) and entered the needed params and it returns this error.
An error occured close the configuation window and try again.
It must be a config parameter that I'm setting incorrectly. There's a bunch so who knows what I'm doing wrong.
I just need the to talk to my Imac so i can get a backup executed. A wireless connection will take too long.
FYI: The cat-5 is brand new and is 100% functional (green light on the TC and router.)

Setting up a Time Capsule as just a wireless backup device

All I want to do is set up a Time Capsule as a backup wireless device. I already have a functioning network on a Linksys rounter (and some of the users on this network have PC's and want NOTHING to do with my Apples-MacBook and MacBook Air). Where exactly do I connect the ethernet cable? The router as some suggest or the modem? And which ports? The set instructions are unclear and before I throw the network into chaos with an unwanted router, I would love some exact suggestions. I have connected nothing as yet. Thanks.

Welcome to the discussion area, dcarmel!
To configure the Time Capsule (TC) for backups only when another router is already present on the network, you would do the following:
Connect an ethernet cable from one of the LAN <-> ports on the Linksys router to the WAN (circle icon) port on the Time Capsule.
Open AirPort Utility - click Manual Setup
Click the Time Capsule tab below the row of icons to establish a name for your TC, a device password (write that down) and adjust time settings.
Click the Wireless tab
Wireless Mode = Off
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update and the TC will restart and you should have a green light in 30-40 seconds. That's it.
Backups will occur over the Linksys wireless network. But, for the first main backup of your Mac(s), it would be great idea to connect them using an ethernet cable to one of the LAN ports on the Time Capsule since you'll be backing up the entire computer on the first pass. Ethernet will be much faster than wireless. You can do subsequent incremental backups using wireless since these normally only take a few moments.
Message was edited by: Bob Timmons

Time capsule not working as wireless router

I am having trouble with my time capsule working as a wireless router. It appears in airport utility and the green light is on. It is backing up my computer which is hardwired with via ethernet. The network setting is on bridge. Any thoughts?

Your first statement and last statement are in conflict.
I am having trouble with my time capsule working as a wireless router.
The network setting is on bridge.
If the TC is set to bridge it cannot work as a router. To be a router the TC must be set to dhcp + nat.
If you already have a router, then the TC should be in bridge. That is correct. If the modem is pure modem then the TC is in the wrong mode to work.
You should have the wireless set to create a wireless network..
Use all short names, no spaces and pure alphanumeric. Set a different name for 2.4ghz and 5ghz until you sort the problem.. if it is just connection to wireless issue.
Please clarify what is the problem.

Time capsule: will it work wirelessly without disrupting my wireless system?

Time capsule: will it work wirelessly without disrupting my wireless system?

This type of setup is difficult, and not officially supported by Apple for good reason.
Before you attempt this, you should know that this type of setup will require a "double hop" wireless connection for backups.
In other words, for your Mac to back up, the wireless signal must travel from your Mac to your wireless router......hop one.....and then travel from the wireless router to the Time Capsule....hop two.
This doubles the chances of an error occurring and unfortunately also doubles the amount of time that it will take for a backup to occur.
I've tried this type of setup a few times as an experiment. It gives new meaning to word "SLOW".
In addition, the Ethernet ports are disabled in this type of setup on the Time Capsule, so it is not possible to use them for any purpose.
Bottom line....the fact that the Time Capsule can possibly be configured this way.....does not in any way imply that it should be configured this way.

Installing Time capsule with U-Verse Wireless Network

Hi all,
I am not a techy, but I get by. I am going to install the Time Capsule and I realized that I don't think this will work with my existing U-Verse Fiber wireless network. After some thought, I believe I should just use this for wireless backup and peripheral operations rather than the internet as my current wifi also operates the televisions in the house.
I'm hoping to get some guidance from the community as to how to use this device without having to purchase more equipment or re-wiring my entire home. Can I just plug it in and use it for wireless backup or will it interfere with my internet service (which I am happy with)?
Any thoughts?

Welcome to the discussions!
You are correct to allow your existing setup handle internet connections.
The simplest setup would be to configure your Time Capsule to "Join" the wireless network created by the U-Verse router. Your computers will be able to backup via wireless assuming that you have a good connection.
If your U-Verse router provides ethernet ports for devices (it likely does), you would also have the option of connecting the Time Capsule to the U-Verse router with an ethernet cable. This would make sense if the Time Capsule will be located near the U-Verse router as ethernet is both faster and more reliable than wireless.
Not to get too technical here, but if you connect the TC this way, you will set Connection Sharing on the TC for "Off (Bridge Mode)".
If you connect the Time Capsule via ethernet, you would also have the option to setup the Time Capsule to "create" its own wireless network. So, you would have two wireless networks available...one created by the U-Verse router and the other created by the Time Capsule.
If you have computers capable of wireless connections at "n" speeds, they could connect to the Time Capsule and your other "g" devices would connect to the U-Verse. In fact, if you purchase a new dual band TC, it will be capable of creating two wireless networks on its own.
So, you have a number of options available. Just depends on how simple or complex you want things to be.

Time Capsule connecting to a Wireless Booster.

Similar Messages

Maybe you are looking for