Time capsule discovery with Migration Assistant

When using the Migration Assistant, my Time Capsule is not discovered. It just spins and looks and never finds it. I rebooted the Time Capsule, but this does not seem to help. Any ideas?

Start over.. factory reset the TC. As noted below, nothing will happen to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Give the TC short names, no spaces and pure alphanumeric.
Mount the TC manually again but use IP address in router mode, and in full isolation from the network.
So you have computer.. plugged by ethernet to LAN port of the TC.
After a reset the TC will be in router mode.. do minimal setup. Ignore all the issues.. none of them matter at this stage.
Then try the migrate again.
Sometimes you will have to look beyond migrate from TM backups and use the original computer.. or do a full restore of the old backup to a USB drive plugged into a computer and manually select files. It is painful but TM has really become buggy in Mavericks.

Similar Messages

First-time Mac user with Migration Assistant woes

I'm a new Mac user with a MacBook Air. Still trying to get the migration process completed after three days so I can start using my computer. Looks nice, at least. Three questions:
1. After a 36-hour migration attempt from a PC over Wi-Fi, and with 2 hours to go, I'm getting a "Reconnecting to Mac" window on the PC. If it reconnects, how long could it take? It's still sitting there after 15 minutes.
2. If I cancel the migration process, do I have to start over and cross my fingers for another 36 hours, or does it pick up where it left off?
3. Is there any way to get a faster file transfer, say by Ethernet cable (I have the adapter), USB, anything. This is becoming painful.
I have verified the Wi-Fi connection is up and running. I can connect and reach the internet from my PC.
I don't want to schlep to the Apple Store. I bought this on Apple's assurance that the migration process would would work. If it doesn't, I'm returning it.
Thanks.

Steve, you don't have to run Migration Assistant right away. You can set it up as if you weren't going to migrate anything. You can start using your Mac right away.
Later, you can run Migration Assistant any time you want.
Depending on when you cancel MA, it is probable that whatever it did up to that point will be lost. 36 hours is unreasonable.
After you start using your Mac and are comfortable that it works to your satisfaction, connect the two with an Ethernet cable. Make sure it's a Category 5e or Category 6 patch cable (most are today). Then run MA. That ought to work and nothing will be faster.
For what it's worth I never got MA to function properly upon initial setup. It ought to work in theory but mine would get stuck at about the 99% point. Running it after initial setup has always been more reliable. I don't know why.

Insufficient space for importing TM backup with migration assistant

First of all this is not for my main Mountain Lion installation on my Mac Pro, it is on a VM Ware Fusion virtual Mountain Lion installation that is running on my Mac Pro also running Mountain Lion. So this is really more a question dealing with VM Ware Fusion (or Parallels since I have the same issue with that as well) vs. a problem with Mountain Lion. Confused yet? I sure am....
I am trying to import a time machine backup of my previous Snow Leopard drive into my virtual machine. I did not want to import this into my new drive because I am starting fresh and trying to clean up and Snow Leopard had 10 years worth of crus I am trying to get rid of, but I would still like to have my old SL drive running within VM Ware to help with the transition. I have a Mac Pro with a dual monitor set up so I want it to run in my second monitor and very slowly over the next few weeks get all the files I want and need instead of just importing a bunch of useless crap.
Anyway, here is the problem I am having and cannot seem to get past this hurdle. When I open migration assistant inside VM Ware ML and choose my time machine backup of snow leopard everything works fine until it finishes calculating the size. I deselected all the files and folder I possibly can which leaves 209GB. Even with every single folder deselcted it still give an insufficient storage error I have already resized the VMware drive to 400GB which is more than enough. In my real machine under Finder>Get Info it shows it as 400GB, but within the virtual machine it is only showing the Mac HD to be 40GB which won't allow migration assistant to import the backup due to insuffient storage.
I have a Mac Pro with tons of disk space so I have plenty of free space to allocate but I have tried everything I can think of but came up blank. Sorry if my explanation was overly verbose or confusing but I wanted to give as much detail as possible. Haven't really fiddled with the settings in VM Ware in a while so I must be missing something.
So, how do you import files showing as larger than 40GB from a time machine backup with migration assistant without getting an error that there is not enough remaining space? And again, I have already resized the disk to 400GB that shows as 400GB on my real machine but only as 40GB inside the VM Ware Mac HD. I also have Parallels if that is easier to do what I am trying to accomplish.

I just solved the problem! And this is actually a pretty big deal because experts at the VM Ware Fusion website and many other forums told me it was impossible.
So here is the guide to running Mountain Lion in VM Ware Fusion or Parallels with a partition larger than 40GB and allows you to import an old user account from Tiger, Snow Leopard, Lion, etc..
1) Make sure to shut down Mountain Lion in VM
2) Under VM settings expand hard drive to whatever size you like
3) You will need either a disk image or an actual DVD of mountain lion, mount that in your VM and choose it as start up. After rebooting open disk utility and partition Mac HD. Instead of only showing the 40GB limit it shold now show the size you created from step 2. Close disk utility and install Mountain Lion as normal. Reboot and unmount disk image.
4) You now have a virtual Mountain Lion with whatever hard disk size you chose.
5) Open migration assistant and do your time machine back up as normal from previous systems.
The reason you might want to do this are many. In my case I wanted to have my old Snow Leopard user account open and running on my second monitor since I just did a fresh install on my Mac Pro. It is easy to import audio, photos, videos but there was a lot of other things I want to take my time bringinging over. There are also many cases where I needed to open up an app and view settings. Now I have my old machine essentially running at the same time as my new install side by side which is fantastic.

Backup will not restore with migration assistant.

This is long and complicated but here goes. Had a 10.5 machine PPC that was backing up to a time capsule. IMac blew out PS so was toast. Took it home and took another iMac 10.5 machine that had a bad HD. Put new HD into that machine and installed 10.6 and then ran migration assistandt from the old iMac HD drive from the unit with the bad PS. The restored iMac with the new HD was a perfect close of the older iMac and everything was perfect. Took to customer site and they were happy. Time machine started backing up again to the same time capsule as before. It created a new backup image on the time capsule with the EXACT SAME NAME as the older iMac had. I did not know that until a year later when the new hard drive in the rebuilt iMac failed. I took a newer iMac of the Intel variety with 10.7 on it to the customer site. I told migration assistant to restore from the time capsule users and data file. I di not want it to restgore programs since I knew the ones on the newer iMac where newer versions and probably not compatible. Restore seemed to go just fine. Users were all there and desktop looked the same as the older iMac with the dead hard drive. I had to install a printer driver but all appeared okay. Customer called the day later and said all files for pages and numbers and address book appeared a year old at the newest. See where this is going.
I went to the site and started looking at the backup files on the time capsule drive. Taht is when I noticed that two exact backup named files existed. So I started drilling down through them ( Not using time machine casues it only had 1 day history on it ) and looked at the dates of the files. Sure enough, one of the backup images had files that had all ended a year ago when the original iMac blew out the PS and the other backup file with an identical name had files much more current in the current month and year. Simple I said to myself. I just happended to pick the older file to restore from. So I renamed the older file so I could not get them confused. Double checked that the one with the current files was named correctly. Went to migration assistant again and ran it again. Completed just fine but sill no file less than a year old. NOw I am really puzzled so I tried a test of one simple file to see if I was wrong in my assumptions. The address book file was one of the files that was a year old. I went to the time caplsule and drilled down to the exact file that address book makes. I had already thrown the corresponding file away on the new machine so I copied the file from the exact same location on the time capslue back up to the same location on the new machine. I then fired up address book on the new machine and the address book worked perfectly with the new and updated and current records.
So now I am sure that the drive image that I have been playing with on the time capsule has the up to date backups. But migtration assistant will not move them to the new machine. It will take a very long time to move every pages and numbers files scattered around in various folders to do this manually. What is wrong with migration assistant that it will not work correctly.

I am not asking if there is anything on the card. I'm not worried about the backup or recovering all of my information. I'm asking if setting up the replacement phone as NEW will change anything at all when I use the OLD sim card.

I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

What's the fastest way to transfer files with Migration Assistant?

I am trying to transfer everything from an iMac 21.5 over Ethernet with Migration Assistant and it is 20+ Hours estimated transfer time. Once I strt can I switch to Thunderbolt? Everything I've read states this is the fastest means.
Thanks!

Thanks. Through further investigation my old iMac does not have a Thunderbolt port so that's out of the question. I think it was going over wifi instead of Ethernet so I disabled my router and am now migrating from Time Machine via USB 2.0. Estimated around 3+ hours now.
Any idea how to get my old iMac out of migration mode?

HT4796 Help needed with Migration Assistant, can't find files?

I've just purchased my first Mac (macbook Pro 15in) so please be kind, I'm so clueless it's ridiculous! Using migration assistant I've transfered aprox 100GB of files from my PC which seemed to take about 2seconds, but have no idea where they are or how to access them. The files were mostly music but when I opened itunes there is nothing in my library. The rest of the stuff was pics, docs, email accounts but none of that seems to be there either.. From the few articles I've read I seem to have somehow created another user account which is labeled Guest User/Sharing only, but I can't seem to log in as that user to find the files.. What have I done?! HELP!!

Congratulations!
... Using migration assistant I've transfered aprox 100GB of files from my PC which seemed to take about 2seconds, but have no idea where they are or how to access them.
It sounds as though Migration Assistant did not do a thing. With Migration Assistant, 100 GB will take time, no matter how the two computers communicate it will be at least an hour. Probably more. I recommend you connect them both to a wired network and make sure the PC is really using it. Wireless will take a lot longer.
I suggest you read the following step by step. On your Windows PC, you will need to download Migration Assistant. That link and everything else you need to know is in this document: OS X Lion: About Windows Migration Assistant. Follow its instructions to the letter.
The "guest" user is a feature of OS X and will not contain your files. Don't concern yourself with it.

TM Backup Volume after restoring with Migration Assistant

Hi there,
I recently restored my system from a time machine volume via migration assistant (NOT while first boot, because it hangs on caluculating amount of space there) to be able to use Boot Camp (my partition seemed to be too much fragmented). There are a whole bunch of files in older backups I still need. Therefor I need to know for sure if I can choose the external HDD with the old Backups as the new TM Backup Volume WITHOUT loosing my old backups.
I haven't found satisfying information about it in this forum but of course it is possible that I've overlooked it.
What do you think about it?
Thanks a lot!

ragob66,
Welcome to the Apple discussions!
Try this:
*Accessing Time Machine Backups From Another User Account or Computer*
Yes, you can do this using the Time Machine interface.
Attach the drive containing the TM backups to your computer.
Control-click the TM icon in the dock and select "Browse Other Time Machine Disks...".
Highlight the desired disk and click “Use Selected Disk”. This will now allow you to browse those TM backups via the ‘time travel’ window. From here you can restore what files you need access to. Bear in mind that any files moved will have the permissions of that previous user account. Thus you may be prompted for the user name and password of that previous account. However, once verified you should be able to adjust “Sharing & Permissions” in the files “Get Info” window.
Let us know if this resolved your issue.
Glenn

Pb with migration assistant

Hello,
I try to install a new Macbook Pro with Migration Assistant.
I connect the Ethernet cable between macbook pro Lion (Source) and macbook pro Lion (Target) and i start.
When i arrived on the screen Transfer Information to this Mac, i select "From another Mac" and i launch Migration assistant in the source.
The target view the source but source can't view target.
I have always "looking for another computer" and nothing.
Thanks for your help.

Hi,
Sorry for my mistake with Pb, I'm frenchman and it's the first time I write a post..And sorry if my english is not correct... If you understand me...it's perfect
So, in the Pondini's Setup New Mac,(thank you very munch for that) he wrote :
Usually, the best way is to use Setup Assistant, when you first start up your new Mac. It will set the new Mac up just like the old one: all configuration, settings, users and data, and all applications (except newer versions already installed).
I make that, but nothing.
So I select "Do not transfer the know", and when I created the user, I do not choose the same as the source, otherwise there are a problem with migration assistant. and after, I used Migration Assistant to install all applications, configurations...But I think it isn't normal.
Today, i will try to install a new Mac with Time Machine.
Thanks for your help

Weird: why would a network drive named "time-capsule-de" with an icon of an old-fashioned PC monitor appear on my home network?

Weird: why would a network drive with the name "time-capsule-de" and an icon of an old-fashioned PC monitor suddenly appear on my home network?
It happened shortly after I'd set up a new Time Capsule with our iMac and had transferred the configuration for it over from my old Time Capsule.
I'd just taken the old Time Capsule into another room and powered it up with my MacBook to confirm that Airport Utility's wiping of its settings hadn't affected the old Time Machine backups still stored in it.
I was in the process of tinkering to see how I could use the old Time Capsule, when Airport Utility offered to "extend" my home network, so I tried that setting, and then got a warning that the old Time Capsule and its wifi networks were not yet secure or private. While I was working to fix that, I noticed that in the Finder sidebar and in my Network settings, this mysterious "time-capsule-de" (with an odd old-fashioned PC monitor for an icon) had appeared. I tried to click on it, but could not access it. I also could not eject it. I shut down my old Time Capsule and my MacBook. When I turned the laptop back on, "time-capsule-de" was gone.
What do you all make of that? Should I worry about the security of my home network? I live in an apartment development, so there are more than a dozen stray wifi signals pouring in from other units.
I'd welcome any thoughts or suggestions. Thanks!

What is the name of your old Time Capsule? Did you change the name to the new one?
It appears in Finder .. that is to be expected.. it is after all a network drive.. and it has PC symbol more than likely because you are using Mavericks which defaults to SMB network.. ie the computer thinks it is a windows computer.
There is nothing bad or sinister going on.. but you certainly need to ensure your own wireless network is secure..
That is otherwise all fine.
If the TC shows up again, check that it is also in the airport utility and check its MAC address with the label on the bottom.. It will show in the Utility .. then you can compare and check you are reading the right thing.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

Transfer emails with migration assistant.

My boss asked me to transfer all his old email from old macpro to his new one. Do i have to set up his email account on iMal first before i transfer them with migration assistant? Or will that set up autmatically while transfering?

On the old Mac. User/Library/Mail. Copy the folder to the new Mac to the desktop. Then on the new Mac from the Finder menu hold down the option key and click on Go. Select Library. Drag the Mail folder from the Library to the trash (don't empty). drag the Mail folder from the old Mac into the Library. Now launch Mail and check to see that all the email is there. If all is well empty the trash.

Time Capsule shows with wrong name on Time Machine

I changed the name of my Time Capsule using airport. However, Time Machine still shows the old Time Capsule name, with the new name underneath. When I try to back up using this disk, it shows the following error message:
"Time Machine could not complete the backup. The backup disk image "/Volumes/Old Time Capsule name/My laptop name.sparsebundle" could not be accessed (error -1)."
I don't know how to fix this. I have looked everywhere. I deleted the NetworkInterfaces.plist file in Library/Preferences/SystemConfiguration, and even made sure to do a secure empty trash. I even did a soft reset of the Time Capsule to the factory configuration, and renamed the Time Capsule all over again. I restarted the computer several times during this process, and yet no luck, it still shows the old Time Capsule name.
Does anybody know how to fix this? Thank you!

Ok, the MacBook is backing up now. Here is what I did:
After manually changing the name of the Time Capsule Disk as above, Time Machine was still not able to back up. I kept getting the error message
"Time Machine could not complete the backup. The backup disk image "/Volumes/Old Time Capsule name/My laptop name.sparsebundle" could not be accessed (error -1)."
The problem is that "My laptop name" Time Machine was using is wrong. I had changed the laptop name in Network Perferences>Sharing before, but it still kept looking for the wrong .sparsebundle file in the Time Capsule. I don't know why, and I even deleted the NetworkInterfaces.plist file again with no success.
I entered the Time Capsule from the Finder menu, found the .sparsebundle file with the wrong name, and manually deleted it. Finally the MacBook was able to backup. However, although the MacBook name is the same as it used to be before, and even though there was already an old .sparsebundle file with the correct name, Time Machine created a new .sparesebundle with the same name, and began an entirely new backup. I am just letting it do this backup, and then I will manually delete the old backup, so it doesn't take space on the Time Capsule. I don't need the past backups (and hope I won't swallow my words), and I am tired of dealing with this, so this will be it.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Time capsule discovery with Migration Assistant

Similar Messages

Maybe you are looking for