Time Capsule disk access SLOW! 2TB - Dual band

I have a Time Capsule (2TB, Dual Band, Firmare at 7.4.2)
Its been working like a dream, backing up 3 Macs for the last 8 months.
I also use it for connecting two or three other disks via USB and then making those accessible over the LAN, and there is also about 100GB of data on the Time capsule disk itself that i use as a dump for files so i can get to them from anywhere on my LAN.
Lately I started to notice EXTREMELY slow disk access, even when i am connected via ethernet (1000 base) - and equally when I am connected via wifi (n)
for example, copying over a 2Mb photo can take minutes when it should take seconds.
i've been trying to figure out whats going on here for a while and so i checked out the sizes of the backup files.. the sparseimages that time machine creates.
one of them was nearly 1TB, while another was around 500GB and the other was around 120GB
that plus my data meant there was only about 300GB free on the 2TB disk.
I have a feeling the slowness could be down to extreme fragmentation of the drive... ??
so i decided to dump the backup files and copy off my other data and do a erase of the disk and start again.. but get this.. i can't even delete the 1TB file ! I have been trying for about 3 days now and it just will not delete.. i get the Deleting msg box and it just sits there, literally ALL night...
i know it isn't just hanging on the Mac (10.6.4) because deleting the other two images also took a long time (but not this long!)
i can't just wipe the disk now because i can't get my other data off either.. I have tried copying it over the network and onto a USB disk connected directly to the Time Capsule, but 3 days later and i'm still copying files..
to put some context into this, I copied over 1.8Gb today and it took about 4 hours...
has anyone had this problem before?? what on earth is going on?? is it down to fragmentation, or something else?? the TC has been working fine up until a few weeks ago when i started to notice slow speed.
any ideas ?
thanks
Adam

if anyone ever has this issue ....
it must have been EXTREME fragmentation. I bought another 2TB external disk, connected it to the TC, did a complete archive, which took around 24 hours... then i wiped the TC and put stuff back... it now works fine again...

Similar Messages

ARD&TC Apple Remote Desktop & Time Capsule (disk access, remote management)

Hello!
Could You help me? I have two problems with access to my Time Capsule.
I have wireless network at home based on Time Capsule, with *one static IP*. I have conected it (wireless) with two iMac's. Me and my girlfriend we have also two macbooks and when we are out of home we want to acces data on our Time Capsule disk. I need access to disk to edit data on it while being long way out of home. Second problem is to access data on our iMac's. I bought Apple Remote Desktop software, it's incredible what it can do but only when I'm connected to my wireless network LAN. I need to control my iMac while being out of home. How to configure Time Capsule and ARD to acces disk and control iMac's? Let me remind You that I have *one static IP for Time Capsule router WAN*. Please help and I would be very very thankful for screenshots of configuraion, I'm newbie in this.
Thank You very much.
Kind regards.
Adam Milwiw-Baron

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

Time Capsule Disk is very slow

Hello,
I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
It took about 16 hours and at 90% it crashed.
After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
I turned off Spotlight completely without a difference in copying speed.
I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
Thanks a lot!

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Cannot Access Time Capsule Disk from Boot Camp

Hi,
I've set up a Time Capsule and I've been able to read and write from:
1) My MacBook Pro and another MacBook
2) A Windows XP (SP3) PC connected by Ethernet
3 )A Dell Laptop running Windows XP (wirelessly)
I can copy files to and from the disk and perform Time Machine Backups (on the Macs).
However, I have not been able to even connect to the disk (but I can use the internet normally) on the Time Capsule on my MacBook Pro Boot Camp Windows XP SP3. I can connect wirelessly and surf the net on the 5 Ghz (and 2.4 Ghz) (non-public/Guest Shared) network. (The password I entered to access the disk are the same on all machines listed, which was not confused with the Network Password) Does anyone face such a problem or know the cause/fix?
Thank You in advance.

I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

Access to Time Capsule Disk via MobileMe Web

I would like to see my Time Capsule Disk appear in my MobileMe account when I'm logged into it via Safari, similar to the way my MobileMe iDisk shows up on my MobileMe login via a browser. Is this possible?

no. You won't be able to access it via mobileme website. although using mobileme login details, you will see it as a drive in your finder window if you set it up right.
http://www.appleinsider.com/articles/09/03/03/airportextreme_time_capsule_gain_mobileme_sharingsupport.html
not sure of the details yet.. am trying to do same thing.

I have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

i have mac book air os x 10.8.2 i create a photo library on iPhoto and i moved it to my time capsule disk now i try to access library from my wife mac book running on mac os x 10.5.8 i always receive library locked on locked disk

Unless you can set the Time Capsule's drive to have it's ownership ignored
you won't be able to use the library on the same volume as the Time Machine backups.
OT

MacBook Air 11" can't access Time Capsule Disk

Hi:
I have two Minis, a MPB 13" and a MBA 11" connected to my Time Capsule. My MBP and the two Minis can access the Time Capsule disk with no problem. It's a different story for the MBA.
From the MBA, I can see my Time Capsule in Finder (Bonjour) and I can click on it, however the disk never appears. Clicking "connect as" doesn't do anything either. From Finder if I go "connect to server" and I type the IP address of my Time Capsule it connects without problems, but it won't connect with its name.
I am able to connect the disk on my other Macs from the MBA via Bonjour, just not the Time Capsule. As mentionned earlier, the Time Capsule disk is available from my other Macs and even from Windows.
I rebooted a few times and confirmed that the username/password are properly saved in the keychain of my MBA.
Any idea how to fix this?
Thanks!

Are your other Macs connected via Wifi or ethernet? It sounds like some sort of network configuration issue. If they are connected via Wifi then I'd make sure the MBA has the same settings for it's network. Alternately I'd get rid of the keychain entry on the MBA and re-enter it to make sure it's correct. As a last resort I'd restart the Time Capsule and see if it makes a difference. I'm connecting a MBA to a Time Capsule so it should work.

Access Time Capsule Disk from Linux Fedora

From my Linux Fedora, I am connected to the main wireless network for the TC. When I go to "Browse Network", I can see 2 destinations named M's TC (FileSharing), when I try to access the first one it opens but has no content at all! While the other one gives an error:
Could not dispaly "Ms-TC.local (afp)"
The file is of an unknown type
Do you know how can I access the TC disk from Fedora?
Thanks.

I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

Access Time Capsule disk from iOS device (iPad, iPhone)

My intended goal is to use Time Capsule disk as cloud replacement for MobileMe iDisk which is being discontinued in June.
I've done Time Capsule 7.6.1 update with iCloud support, entered my iCloud account settings, and authorized disk access via WAN. Everything appears to be configured properly as I can access my Time Capsule disk on Mac computers from outside my home network. How do I access this disk on iPhone and iPad?

I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

Time capsule disk operations very slow

Hello,
My time capsule became very slow since a few days.
File transfert from any computer s(Mac and PC) on the network to the tme capsule is now extremely slow. Does not matter if I user Ethernet or Airport.
No configuration change have been made neither network change.
Thanks in advance for any help.

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Time Capsule Disk not mounting

Since a couple of days, my 2 TB Time Capsule (1st generation, software version 7.6) disk (2 partitions) will not mount. Neither does it show up in the TimeCapsule preferences list. It has a wired ethernet connection with my MacMini and I use AirPort with my MBP and iMac. AirPort (sofware version 5.5.3) still works. I tried resetting, going through the fast-and-slow amber blinking lights, and the light on front is green again. What is the problem and do I get access to my data?

sterrenman wrote:
Since a couple of days, my 2 TB Time Capsule (1st generation, software version 7.6) disk (2 partitions) will not mount.
I'm curious: How did you manage to partition the internal disk of your Time Capsule?
The first 2TB Time Capsule was a 2nd generation model.
Neither does it show up in the TimeCapsule preferences list.
Please explain what you mean by "the Time Capsule preferences list".

Time Capsule Disk Doesn't Appear in Finder or Disk Utility

I have a 500G Time Capsule (single band, I think) that I want to partition (just into disk images, not volumes) so that I can maintain separate-sized locations for my family's music library, photos, and Time Machine backups for the non-media files on each of a Mac Mini and 4 laptops. But I will ask more about that later.
My more immediate problem is that the Time Capsule Disk Volume generally just doesn't appear in my Finder or in Disk Utility at all. A couple weeks ago, for some reason, it did appear once and I took the opportunity to create a 215G Disk Image--leaving 250G for the rest of the Disk Volume which was indicated as having 465G rather than 500G actually available. But since then (as before) the Time Capsule volume hasn't appeared in Disk Utility at all, and only rarely in the Finder.
In the Finder the Time Capsule appears under the Shared heading in the left panel, with the Time Capsule disk volume appearing as a folder in the right panel (if it connects, which it usually requires a password for, but sometimes it doesn't...). If I open the folder then the right panel goes blank (indicating, I think, that I have opened the volume but there is nothing inside) and the volume (usually) eventually shows up under my own Mac in the Devices heading. (That is, the Time Capsule disk volume shows up along with Network, Macintosh HD, and Remote Disk in the right Finder panel when I select my Mac under Devices in the left Finder panel.) At that point the TC volume shows up in the Finder as a 220G Volume and the disk image shows up indented under it as a 215G Disk Image; indented under the Disk Volume there is also a 5G Sparsebundle file from a Time Machine backup. If I open the 220G Disk Volume in the right Finder panel then it shows only the 215G Disk Image and the 5G Sparsebundles in the right Finder panel. This seems to suggest that the 215G Disk Image and the 5G Sparsebundles are both treated as 'used' and the 220G size given for the Disk Volume represents what is left (although 215+5+220=440, so where the extra 25G went I don't know).
If I open the 215G Disk Image in the right Finder panel then, after a while, it shows up as a Disk Image in the right Finder panel when my Mac is selected under Devices in the left panel. I can create folders in the Disk Image and copy documents to those folders, at least.
But in any case, regardless of whether I open the 220G Disk Volume or the 215 Disk Image in the Finder, the Disk Volume never appears in Disk Utility so there is no possibility of reformatting it. The 215 Disk Image has sometimes shown up in Disk Utility (and once it apparently allowed me the option of partitioning the Disk Image into further Disk Images), but sometimes it doesn't show up and I haven't been able to figure out why it does or doesn't.
I find this all very confusing and the Finder and Disk Utility behavior seems downright erratic. I'm not sure whether something is broken or if I just don't understand how it works (starting with the difference between the Devices and Shared headings in the left Finder Pane). I would appreciate any advice on how I can reliably access the Time Capsule disk volume in the Finder and Disk Utility. Thanks.

Same problem after 10.8.2 update yesterday,
Time Machine functions but disk does not mount in finder.
The disk also shows up in disk utility when TM is running
as mounted (beneath a sparse image file) but not visible.
Is this a bug, or a feature?
LW
MBPro. OSX Mountain Lion, backing up to Time Capsule

How to health check time capsule disk

how to health check time capsule disk?
when doing time machine backuping and copying files into time capsule, it would take ages and very long time.. is the disk going to die soon?
is there anyway i can check the disk?
my time capsule is 2TB current model.
please help.
thank you.

Time Machine automatically checks the backups on the disk. It does a quick check (a few seconds) before every backup, and periodically (every month, I think) does a much more thorough check.
You can do that yourself, by holding the Alt/Option key while selecting the TM icon in your menubar, and selecting Verify Backups. That may take quite a while, if you have a lot of data. I'd recommend connecting via Ethernet, as it will still be slow, but 2-3 times faster than WIFI.

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
Thanks !!
Alain

Could that read " . . . could not access . . ."? If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

Time Machine says Time Capsule Disk unavailable

     I have the exclamation point in the menubar icon and Time Machine says Time Capsule Disk unavailable even though I have backed up to it many times before. I tried unpluging/plugging in the TC, but this did not solve the problem. Any ideas?

      However, I did have a problem periodically with computers not recognizing the TC disk before I had unclicked the "Enable file sharing" box, so I might still end up using your advice if this happens in the future.
There is a bug or several of them.. losing the disk is one thing the new 7.6.4 firmware is supposed to fix.. my deeply held suspicion is that Apple are using all of us as beta testers.. as lots of people are having trouble. But who knows it may finally fix this bug.. we are awaiting confirmation. ie people saying it is now fixed.. rather than since loading 7.6.4 my TC is now dead.. or disappeared .. or broken.. or no longer has wireless output.
Lets say maybe they fixed a bug.. and added some more.
     The reason I had unchecked the "Enable file sharing" box is because I have Mountain Lion Server and wanted to use port mapping on the TC to point to my computer as a File Server. To do this I went into Airport Utility and in Network pane tried to add File Sharing to the Port Settings. However, this conflicted with the "Enable file sharing" box from the Disks pane. Do you know of a way to have time machine backups to TC but also run a File Server from a computer networked with the TC using port mapping? Thank you for any guidance.
You only need the ports forwarded to the server to get outside access.. ie remote wan access.. Did you have wan access to the TC checked.. that will cause a conflict with AFP .. since it cannot be forwarded to multiple destinations at once.
If you do not have WAN access checked then you should be able to check "enable file sharing" since that is local lan..
Try it and tell me what happens.. I have never tried the combo you are using.
I would try simply using a different method to access if that doesn't work.. eg BTMM should work fine to the Server without needing ports forwarded in the TC.. as long as the TC is the main router.. and this whole issue is only because the TC is the main router.
You can also do it with vpn.. which is more robust and more business/pro method to access a server remotely than AFP.

Time Capsule disk access SLOW! 2TB - Dual band

Similar Messages

Maybe you are looking for