Time Capsule DIsk Image Can't Be Mounted - GRRRRRRRR

I have a 1TB time capsule and successfully back up a macbook air & a macbook pro to it. My imac suddenly stopped backing up to it. I have changed the name of the time capsule to less characters (although the other machines had no problem). The message changed to could not mount disk image for imac only (others still work fine). Imac can back up to another disk without any problems. Did a "repair disk permissions" on imac and followed instructions to restart etc etc - still same problem. I have checked all the keychain passwords, I have deleted the timecapsule.plist file and restarted and checked sharing permissions. STILL THE SAME MESSAGE and only for the imac. I have searched the the posts on this site and done every action I can find...

Every day, my Internet connection goes off line. The connection is Time Capsule to a cable modem. I had no problem like this with my old Airport Extreme. I have 3 Macbooks and one is always being disconnected from Time Machine. I have to reboot the laptop to re-connect. Sometimes the other MacBooks stay connected, and only one is off line. My iPod Touch never gets disconnected.

Similar Messages

  • Time Machine / Time Capsule Error: Backup disk image could not be mounted

    So I'm trying to back up to time machine, which used to be working fine, but I have this problem happening on two computers now (which probably means the error is in my Time Capsule.)
    The Time Capsule shows up on my "shared" list in my finder windows.
    I can connect to it, and open the folder inside, and SEE my two disk image files in there.
    But Time Machine gives me a "The Backup Disk Image Could Not Be Mounted" error. No other information.
    If I double-click on the disk image file directly, I get an error "The Following disk images failed to mount" and then it lists the file and says "Resource temporarily unavailable."
    Help, please.

    I'm caught in the same loop, with no end in sight. I've only been using Time Machine and Time Capsule for 2 months. This week it stopped working. First error message:
    "Unable to complete backup. An error occurred while copying files to the backup volume."
    Checking the Time Machine preferences, "Last backup" would read "backup failed"
    When I got this error, all the wireless functions went offline, even thought the TC light was still green.
    I would shut down, shut down the Time Capsule, shut off my modem reboot everything in order.
    Next error message:
    "Disk repair. The disk 'Backup of [my computer]' was not repairable by this computer. It is being made available to you with limited functionality. You must backup your data and reformat the drive."
    Then: "Time Machine Error: The backup volume is read only. To select a different volume ... Time Machine preferences ... "
    I spoke to someone at Apple, who sent me the Time Machine Troubleshooting page:
    http://support.apple.com/kb/HT3275?viewlocale=en_US
    I went through:
    1. updated my system software
    2. updated the TC firmware to 7.4.1
    3. dragged the sparsebundle to DiskUtility. It took a while (more than an hour?) but said the disk could not be repaired. When I tried again, the repair function wouldn't run.
    4. tried to delete the sparsebundle, but it would choke at almost the end, sometimes it would just crash the finder, sometimes say "Sorry, an unexpected error occurred," sometimes "Operation cannot be completed because the item 'bands' is in use." I even tried to Stuff the bundle with 'delete original' checked, but the stuffing, after about 15 hours, jammed near the end (stuffed 20 gigs of 35 gigs).
    5. tried to reselect the TC, and run backup anyways ... now it can't find the volume, back to the error messages and crashing Finder
    6. checked password in Keychain, all ok.
    Now what??
    Do I use Airport Utility to erase it? At least TC is still showing up there. Or press the rest button on the back of the Time Capsule to reset to factory defaults?
    I've resigned myself to losing my backups. Now I would just like to get it up and running again.
    In hopes,
    Linda

  • My Time Machine / Time capsule gets the error:  The backup disk image could not be mounted

    My time machine / time capsule gets the error:  The backup disk image could not be mounted.

    Reboot the TC.
    If you normally have multiple computers backing up, under Lion there seems to be some issues.. you need to force other users off the system. You can do that through the Airport utility, manual setup, disks, disconnect all users. Note carefully if you use Lion you probably need to download the real airport utility.. 5.6 to accomplish anything useful.

  • Time Capsule - Time machine error "backup disk image could not be mounted"

    Recently I lost a folder and attempted to resore from my Time Capsule backup (which I started when it first shipped) not only did it fail, but know I get the message "backup disk image could not be mounted" when I try to backup. I have used Airport Utility to try and sort - that shows green light and it is connected by ethernet 9and shows in network (I can see the sparsebundle). I have been trying for a couple of weeks now - any ideas??

    John & Joel,
    I've done some research and put together some ideas.
    "The backup disk image could not be mounted"
    *“Disconnect All Users…”:*
    If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
    Open Airport Utility and select the Time Capsule on the left.
    Click “Manual Setup”.
    Select “Disks” at top of window.
    Click “Disconnect All Users…” at bottom of window.
    Now try Backing up again.
    *Stalled .inProgress Files:*
    Select the TC in the SideBar of the Finder window.
    Click "Connect as...". Enter your TCs password.
    Double click the blue folder that appears in the finder window. The sparsebundle should now be visible.
    Double click the sparsebundle and then click “Skip” in the checksum message.
    Once “Backup of (Users Computer)” mounts in the Sidebar open the folder containing past backups. Are there any “.inProgress” files there. Delete them.
    Unmount the backup drive and try backing up again.
    *Permissions Issue:*
    Select the TC in the SideBar of the Finder window.
    Click "Connect as...". Enter your TCs password.
    Double click the blue folder that appears in the finder window. The sparsebundle should now be visible.
    Highlight the sparsebundle and “Get Info” (Cmd-I). At the bottom of the Get Info window open the “Sharing & Permission” section. Beside “Everyone” it should say “Read & Write”. If it does not, change it.
    Now try performing a backup again.

  • Time machine - "the backup disk image could not be mounted"

    SInce a few days, I am unable to backup via Time Machine.
    I always get the message:
    TIME MACHINE ERROR
    The backup disk image could not be mounted
    I use an Apple Time Capsule and still have more than enough free space on it.
    Use OS X 10.5.5
    Help.....
    Tks

    Rosy,
    *_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
    First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
    Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
    *Unmount the Backup Disk Image* (TC)
    If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
    Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    *“Disconnect All Users…”:*
    If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
    Open Airport Utility and select the Time Capsule on the left.
    Click “Manual Setup”.
    Select “Disks” at top of window.
    Click “Disconnect All Users…” at bottom of window.
    Close the Airport Utility.
    Now try Backing up again.
    “I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    Let us know if any of the suggestions above resolves your issue.
    Cheers!

  • Time machine error: The backup disk image could not be mounted

    Time Machine worked OK for several months. Now I get this error every 10 minutes or so.
    I unplugged Time Machine capsule and "Change Disk" in Time Machine options.
    Nothing helps, I continue to get this error.
    I cannot Enter Time Machine either. "Connecting to Server, Connecting to backup" does not work.
    Help please because I will probably have to archive and reinstall Leopard. I need the backups,
    Christine

    Christ1ne,
    Before you reformat the disk, consider these causes of this error.
    *_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
    First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
    Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
    *Unmount the Backup Disk Image* (TC)
    If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
    Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    *“Disconnect All Users…”:*
    If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
    Open Airport Utility and select the Time Capsule on the left.
    Click “Manual Setup”.
    Select “Disks” at top of window.
    Click “Disconnect All Users…” at bottom of window.
    Close the Airport Utility.
    Now try Backing up again.
    One poster reported: “I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    # Try removing the apostrophe from the disk images name (sparsebundle).
    *A Stalled .inProgress Files:* #
    It may be that the previous backup attempt was ungracefully interrupted leaving remains that Time Machine can’t deal with.
    Stop any current backup attempt. Choose “Stop Backing Up” from the Time Machine menu.
    Open the Time Machine Preferences and turn “OFF” Time Machine.
    Open your Time Machine drive.
    Open the folder labeled “Backups,backupdb”.
    Now open the folder containing backups of the computer in question.
    Are there any “.inProgress” files there. Delete them by dragging the file to the Trash. Or Ctrl-Click the file and select "Move to Trash" from the contextual menu. (Give this time as deleting a large file on an external disk can take a while.)
    Turn Time Machine back “ON”. Now try backing up again.
    NOTE: If the above procedure becomes impossible to perform, try accessing the disk image from another Mac. Some have discovered that attempting a repair from another computer succeeds where the original computer failed.
    Let us know if any of the suggestions above helped to resolve your issue.
    Cheers!

  • Time Machine Error Message: "The backup disk image could not be mounted"

    I just installed Time Capsule and the initial back up was going smoothly. Now
    all I get is a and the Error message "The backup disk image could not be mounted". Can anyone help me troubleshoot this problem? Thanks.

    This works, if there is no corruption in the sparse image. But after weeks of backups, my sparse image on a USB disk attached to an Airport Extreme was corrupted.
    I am right now repairing it by connecting the USB disk directly and using disk utility. It recovered the file system and is not rebuilding the B-Tree. I hope that works, otherwise it will have to be disk warrior...
    On Time Capsule, I have heard folks having success with attaching the image, and then repairing it:
    hdiutil attach -nomount -readwrite /path/to/sparse/image
    Your mileage may vary, but you do not have a lot to lose in this circumstance...
    This functionality should really be in the Airport or Time Capsule, or at least Disk Utility or Airport Utility.

  • Referenced images on time capsule disk

    hi,
    because i'm running out of space on my mbp's hard disk, I'm thinking of putting referenced images on a time capsule disk, keeping the library on the mbp, wil this disk be fast enough. The network will be "n" and i'll connect anonther disk to it for back up?
    wil this setup be possible?

    The setup is possible but it will be slow, especially if you are using raw or tiff files. Most jpegs are probably workable.
    Just get an external drive for your MBP and connect using hardwire of some type.
    I have my library on my 15" MBP (and yes, I have previews turned to match 1440x1440) so that I can view the overall content of my library - and also share with iWork/iLife suite. My referenced masters are all on external dirve (2x, one being a backup).
    Cheers

  • Time Capsule disk cannot be mounted nor found by Time Machine

    Suddenly Time Machine can't find my Time Capsule disk to back up to.
    I've tried setting up my Time Capsule in various ways, even resetting to default factory settings.
    My network seems to work fine and Time Capsule is shining brightly green, but clicking on Time Machine Preferences, it asks me to Choose Backup Disk. Clicking on that I just get an empty list. No disks. My only choice is to Set Up Time Capsule, which I've now done a couple of times without change. The Apple Support suggest a change to a shorter name... Needless to say, this is not the problem. Tried that too.
    When I click on Manual Setup and check the Disks tab, there are no disks available there either.
    Patience running on empty... Anyone found a solution to this or is my only option to shut off this expensive machine forever (seeing as it doesn't back up and that it's started to hum annoyingly loudly)?
    Any help at all would be greatly appreciated! Thanks!

    My last resort was to connect my laptop and the time capsule with an usb cable.
    The bad thing is that nothing happened. So for me this means heading back again to apple care so they tell me whats wrong with it (i just received it today from apple care because it stopped turning on 2 weeks ago and they didn't knew what was wrong with it).

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • Why does Tiger always mount Time Capsule disks automatically?

    I have a Time Capsule (early 2009) with wireless connections to an iMac running OS 10.5.7 Leopard and a PowerBook G4 running OS 10.4.11 Tiger. The G4 always automatically mounts on the desktop the TC Data disk (i.e., backup volume disk) and any disks physically connected to the iMac. Even if I unmount them, they will come back to the G4 desktop. The iMac requires manual mounting of disks except for the Data disk which mounts automatically during a backup. How do I stop the G4 from automatically mounting disks?

    I had looked in the G4 (OS 10.4.11) System Preferences/Accounts/Login Items and found an item called Airport Base Station Agent listed as an application. This also appears in the Login Items on the iMac (OS 10.5.7). So I didn't see that as the culprit. I didn't see the Time Capsule listed in the Login items on either computer. Maybe this application or some preference file is corrupted on the G4. I don't know how Airport Base Station Agent got installed so I am reluctant to remove it and later find out that wireless no longer works. Maybe when Airport Utility is installed? I was unable to locate it using Find File. The G4 remounts the Time Capsule disk on a Restart so it must have something to do with the Login. But I don't know what.

  • The backup disk image "/Volumes/Time Capsule Disk/Earl Burroughs's MacBook Pro.sparsebundle" is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....

    The backup disk image “/Volumes/Time Capsule Disk/Earl Burroughs’s MacBook Pro.sparsebundle” is already in use. This is the message I get when it tries to back up, it had been working fine prior to this.....

    The Backup disk image ... sparsebundle ... is already in use.

  • MacBook Air 11" can't access Time Capsule Disk

    Hi:
    I have two Minis, a MPB 13" and a MBA 11" connected to my Time Capsule. My MBP and the two Minis can access the Time Capsule disk with no problem. It's a different story for the MBA.
    From the MBA, I can see my Time Capsule in Finder (Bonjour) and I can click on it, however the disk never appears. Clicking "connect as" doesn't do anything either. From Finder if I go "connect to server" and I type the IP address of my Time Capsule it connects without problems, but it won't connect with its name.
    I am able to connect the disk on my other Macs from the MBA via Bonjour, just not the Time Capsule. As mentionned earlier, the Time Capsule disk is available from my other Macs and even from Windows.
    I rebooted a few times and confirmed that the username/password are properly saved in the keychain of my MBA.
    Any idea how to fix this?
    Thanks!

    Are your other Macs connected via Wifi or ethernet? It sounds like some sort of network configuration issue. If they are connected via Wifi then I'd make sure the MBA has the same settings for it's network. Alternately I'd get rid of the keychain entry on the MBA and re-enter it to make sure it's correct. As a last resort I'd restart the Time Capsule and see if it makes a difference. I'm connecting a MBA to a Time Capsule so it should work.

  • I have "lost" the time machine disk on my time capsule. How can I get it back?

    I went to restore a Word document from January 2010. When I went into Time Machine to restore it, I found that the current backups only go back to May 2013. I've had the Time Capsule at least a couple of years longer than that. I tried going into Time Machine to select disk, and ended up deleting the existing disk and being offered a new one.
    However, I know that the old backups (from May 2013 onwards, anyway) are still there. How can I reconnect to them via Time Machine?

    It was the alt key that did it
    Interesting, since it is the control key that works on my Mac....not option or alt.
    Unfortunately, if you cannot select the disk in Time Machine Preferences as a Time Machine backup destination, you will have to go with what you have.
    If it were me, I would probably erase the Time Capsule disk and simply start over again with a new backup set.

  • Mounting Time Capsule disk breaks Time Machine

    Mounting my 1TB Time Capsule Disk (location of my iTunes Library) breaks Time Machine. Time Machine says it cannot mount the disk. Ejecting TC's hard drive, fixes it. Is there a work-around for this or is this a bug? This makes using TC's disk a bit tedious.
    Thanks
    Graham

    Graham,
    That's interesting. While I don't use the TC hard disk for anything other than TM backups, I mounted the drive in a finder window so that I could see the sparsebundle of my backups. Then I initiated a "Back Up Now". I had no problem completing an incremental backup. But then again, I don't have other data occupying the drive.
    I wonder if you have some other factor preventing the backups. Or do iTunes and iPhoto libraries externally stored on the TC somehow occupy bandwidth and prevent communication with TM?
    Maybe someone already has setup what you wish to do and had better success.

Maybe you are looking for