Time capsule disk operations very slow

Hello,
My time capsule became very slow since a few days.
File transfert from any computer s(Mac and PC) on the network to the tme capsule is now extremely slow. Does not matter if I user Ethernet or Airport.
No configuration change have been made neither network change.
Thanks in advance for any help.

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Similar Messages

Time Capsule Disk is very slow

Hello,
I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
It took about 16 hours and at 90% it crashed.
After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
I turned off Spotlight completely without a difference in copying speed.
I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
Thanks a lot!

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Just installed new Time Capsule, wifi now very slow, what amI doing wrong?

Just installed new Time Capsule, wifi now very slow, what am I doing wrong?

It's possible the reason it seems so slow, is that a backup might be in progress - and since it's the first backup everything on the disk is something that Time Machine is backing up and is being transferred across the WiFi at the same time as you're trying to use your Internet. So you're competing with Time Machine data flying across your WiFi along with your internet stuff. So if this is indeed what is happening (look at Time Machine to see if a backup is in progress), either pause the backup to a more convienent time or live with the slowness till the backup is done this first time, and after that you probably will not notice the "competition" on your WiFi. I like to schedule the Time Machine backups to late at night rather than once an hour (the default), but that schedule should be whatever you feel most comfortable with.
There is a handy free utility called "TimeMachine Editor" that you can get from http://timesoftware.free.fr/timemachineeditor/ that lets you create your own customized backup schedule. You can create several schedules to fit your working conditions. I've used it for several years with never a problem. I don't have anything to do with the company - just a happy user.
Good luck...

Time Capsule HDD is very slow

My new Time Capsule Hard disk data transfer is very slow and taking lot of time to copy single item, I connected my time capsule thru an existing wireles network instead of creating a new network, pls suggest how can i make it fast to access data or copy data.

You are connected the wrong way..
Plug into the main router via ethernet with the TC in bridge mode.
Setup wireless to roaming with the current network.. ie same wireless name = SSID and same security settings.. wpa2 AES = WPA2 Personal and same password.
Or simply turn off wireless in the TC.. use ethernet for fast speeds.

Time Capsule suddenly producing very slow internet connection

I use my TC as a router and back-up. The internet connection is suddenly very slow and unable to load some more complex web pages. I plugged the cable modem directly into my MacBook Pro and the connection is fine, so I do not believe it is our signal from the internet provider. Yesterday I was unable to locate my TC back-up files on my computer, but today I could.

thomsenbrønshøj wrote:
Same scenario. firmware 7.7.3. Drops from 8Mbit direct to 0,2Mbit through the Time Capsule (latest version 2TB).
Have a try naming the two wireless bands differently.
ie TC24ghz and TC5ghz .. then force the Sonos to use 2.4ghz and force the computer to use 5ghz.. do you get any improvement??
If not the TC could be faulty on the wan side.. to test you need to do actual file transfer tests between the client and the TC.. copy a large file to the and from the TC hard disk.. it should go at up to 50MB/s over ethernet and around 10-15MB/s over wireless.
The WAN issue with some modems is difficult to track down.. if the TC is new return it.. or still in warranty at least get apple to test it.

4Th Generation Time Capsule Running Backup very Slow

I am having a problem with my 4th generation time capsule as it is running very slow , it shows that i need to backup 151 Gb data and for the last 2 days the device backup only 150 mb, pls advise what is the problem? setup of the wireless network seems fine to me without any problem
please help

When you use ethernet, make sure your wireless is turned off in the computer.
It can be worthwhile isolating the TC to the Computer so there is nothing else happening.
Also for Mavericks ensure you have ipv6 set correctly to link-local.
A 100GB backup certainly should not take 20hours..
Although the 2008 (gen1 TC is much slower than later versions).
A first backup of the computer must deal with loads and loads of little files, as a warning can go slow.
A different backup software will be just the same.. it is the speed over network and handling small files that is the issue. Once that first backup is done the later incrementals should not be a problem though.

Time Capsule + Airport Extreme very slow internet connection

first time post here, looking for some help.
I have a small wireless network at home which runs as follows.
Modem - time capsule (acting as wireless router to macbook pro) - ethernet connection to iMac
I would like to extend the range of the wireless network as we dont get signal upstairs. To do this I have added an airport extreme to extend the signal (as someone gave me one for christmas!).
The network works fine, signal is great all over the house however internet traffic is very very slow when devices are connected to just the extreme station (ie when out of range from the time capsule).
Does anyone have any suggestions as to why my internet connection upstairs is very very slow?

Thanks for the reply. It seems to have helped a little - should I expect slower speeds from the extended network?

Time Capsule connection is very slow on windows 8

Time Capsule wireless connection is very slow on a Samsung windows 8 computer.
Any advice? It is placed next to my mac and the speed is 20% less (often more)
If I move the computer into the livingroom (about 10 meter) the speed is reduced with 95%.

Windows 8 drivers are still developing.. download the drivers from the wireless manufacturer not Samsung and try it.
I am not surprised though at differences between wireless.. card using different chipsets and different antennas will give totally different results.
But you can help a bit.. setup the TC with SMB names.. short, no spaces, pure alphanumeric.
Set the name for 5ghz different to 2.4ghz so you can change over.
Set the security to WPA2 Personal which is the only one suitable for N wireless at home without a server.
Set 2.4ghz to manual radio channels and test, channel 1, 6, 11 in turn.
Try up close using 5ghz as it is faster.. but to get full speed you need a broadcom 450mbps card..
Remember wireless chipset like atheros and broadcom never quite see eye to eye.. it is one reason you buy the same brand.
Solution.. buy a cheap edimax wireless router.. plug it into the TC and use it for wap only.. I just did this for a friend.. works much better than TC or airport extreme on a PC. But I have not used win8 yet.. no idea if that is going to be problematic.

Time Capsule external drive very slow for backup

I am experiencing very, very slow backup times using an external drive attached to my Time Capsule. When I recently added a 3 TB Rocstor external drive to my mid-2011 iMac using FireWire, I included it in the drives to be backed up. The internal 2 TB of storage in my Time Capsule was no longer enough, so I plugged a 4 TB WD My Book Studio drive into the Time Capsule's USB 2.0 port and specified this WD drive as the only backup storage. The first backup took almost 48 hours. Now the Time Machine keeps trying to back up about 400 GB - 500 GB (though there haven't been any changes) and is transferring about 400 KB/sec over Ethernet from my iMac to the Time Capsule's external drive. What am I doing wrong? (I recently upgraded the iMac to OS X 10.10.2 Yosemite.)

Frankly, I have no way to gauge your network setup, so I can't really tell you what you should expect. I can tell you from my own experiences using a local network based on a 3rd Gen. Gigabit Ethernet AEBS that using Ethernet the average throughput (not interface) was in the neighborhood of 16-20 MBs/sec. The average throughput for a USB 2.0 drive connected directly was about the same.
This works out to an average throughput of around 60 GBs/hour. Depending upon file sizes and number of files being transferred a USB 2.0 drive might reach 100 GBs/hour, but that is a rare outcome. The USB 2.0 drive interface speed is about the same as FireWire 400 - 400 Mb/s or roughly 50 MBs/sec. This is what I know from measurement. Do not expect Ethernet to be any faster for throughput.

Time Capsule 3T WiFi very slow, just 0.4Mbs.

When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
I tried to turn everithing off and turn them on one-by-one, from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
How can I fix it?
The AirPort Utility does not offer any resource to do it.
It had been running just fine since installed on October/2013 and I noticed that it was getting slower in the last 5 weeks and now it is slow all the time.
I can do the basic on MacAir but AppleTv just do not allow me to watch a movie on Netflix (I can browse through all windows but the movie won't start).
Thanks for an answer,
edudrey

edudrey wrote:
When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
Just need to confirm a few things.. 2.5Mbps is very slow.. if you use b for bits as we try to do.. if you mean Bytes, then that is ok. We try and use B for Bytes.
from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
So you are getting internet via wireless.. not from standard cable or adsl modem?
What is the modem and is it a router as well??
How is the TC connected to the modem router and in what mode??
If you use any client on the TC wired, can you test it??
If you use wireless have you made sure to use all names that are short, no spaces and pure alphanumeric.
Mavericks now uses SMB networking by default so it can help..
More importantly the ipv6 is set correctly to Link-Local.

Time Capsule/Airport is very slow...

Just bought a new 1TB Time Capsule. I replaced my old G router, set it all up in Airport Utility and Time Machine. My network consists of two MacBook Pros, a silver-door G4, and an Apple TV. I'm using the WPA Personal security - the one that requires 13 characters. I'm having two problems...
1) The performance of my network seems significantly slower than it was with my old Linksys router. Web pages access seems slower, and now a movie that should take only 30-40 minutes to download into Apple TV is now going to take 5 hours?
2) Because I'm going to back up three computers, I decided to only set one to do it's first big backup at a time. I set it (the G4) to start a backup when I went to bed, and when I got up only 3 gigs had been backed up.
Although I wasn't expecting lightning, I did expect the performance between the Time Capsule and the MacBook Pros to be faster. And is the backup really supposed to be that slow? I could be waiting over a week or more to get my first computer totally backed up. Am I missing something?
Bill

Forgive the size of the post, but the suggestions below have helped others with similar issues. Try each topic individually and see if things improve, If not move on to the next one.
*Keep the Time Capsule Cool*
Some posters have observed that when they positioned the Time Capsule for better ventilation and cooling, their network connectivity issues resolved themselves. Also avoid locating the devise within poorly ventilated cabinets or piling items around or on top of it.
*Time Capsule Orientation*
While the location you chose to setup your Time Capsule may be acceptable, but the direction it is oriented can have an effect on signal strength. It appears that the signal of the Time Capsule does not radiate equally from all sides of the devise.
The antennas within the devise are positioned along the 3 smooth sides. That is, there is no antenna on the side bearing the ports and cables. As a result, position the devise with the ports and cables AWAY from the direction of most of the clients that will be connecting to it.
*Cordless Phones*
Some users have discovered that the cordless phones they have in the home occupy or are near the same bandwidth as their wireless network (2.4Ghz or 5Ghz). Try temporarily disabling the handsets and their bases and see if network connectivity improves. If so you may need to change the channel that the phone uses or purchase phones that occupy a different bandwidth.
*Preferred Networks & Airport Services*
You may be experiencing interference from other networks in your neighborhood. When you click the Airport menu are there other networks listed other than your own?
If so, is your network at the top of the list? It should be.
Go to System Preferences --> Network --> Select Airport on the left.
Click "Advanced". In the “Airport” tab note the various local wireless networks that Airport detects. Is the network you prefer to connect to at the top of the list? If not drag it to the top. Are there other networks you never intend to connect to (an old work network, or a neighbors network)? Then highlight them and click the "-" button.
Make sure “Remember any network this computer has joined” is checked.
Click "OK".
For "Network Name" be sure your network is selected and then click "Apply".
Is Airport (wireless) your primary means of connecting to your network? Is so, is Airport at the top of the list of services on the left? It should be.
Click the small “Gear” button at the bottom of the window and select “Set Service Order”.
Now drag Airport to the top of the list.
Click “OK”. Click “Apply”.
Now see if network connectivity has improved.
*Transmit Power & Wide Channels*
If you are using the 802.11n only (5GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Select “Airport” in the toolbar.
Click the “Wireless” tab.
Click “Wireless Options...” at the bottom of the window.
Adjust the “Transmit Power” to 100%.
Put a check mark in the box labeled “Use Wide Channels”. (If you are using a 802.11a/b/g (2.4GHz) radio mode then select “Interference Robustness”)
Click “Done”.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network speeds improve.
*Reduce the DHCP Lease Time*
Some have found that reducing the DHCP lease time improves their network connectivity.
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Click “Internet” at the top of the window.
Select the “DHCP” tab.
Change “DHCP Lease” to a shorter time.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network improves.
Let us know if any of these suggestions improve your situation.

Time Capsule disk access SLOW! 2TB - Dual band

I have a Time Capsule (2TB, Dual Band, Firmare at 7.4.2)
Its been working like a dream, backing up 3 Macs for the last 8 months.
I also use it for connecting two or three other disks via USB and then making those accessible over the LAN, and there is also about 100GB of data on the Time capsule disk itself that i use as a dump for files so i can get to them from anywhere on my LAN.
Lately I started to notice EXTREMELY slow disk access, even when i am connected via ethernet (1000 base) - and equally when I am connected via wifi (n)
for example, copying over a 2Mb photo can take minutes when it should take seconds.
i've been trying to figure out whats going on here for a while and so i checked out the sizes of the backup files.. the sparseimages that time machine creates.
one of them was nearly 1TB, while another was around 500GB and the other was around 120GB
that plus my data meant there was only about 300GB free on the 2TB disk.
I have a feeling the slowness could be down to extreme fragmentation of the drive... ??
so i decided to dump the backup files and copy off my other data and do a erase of the disk and start again.. but get this.. i can't even delete the 1TB file ! I have been trying for about 3 days now and it just will not delete.. i get the Deleting msg box and it just sits there, literally ALL night...
i know it isn't just hanging on the Mac (10.6.4) because deleting the other two images also took a long time (but not this long!)
i can't just wipe the disk now because i can't get my other data off either.. I have tried copying it over the network and onto a USB disk connected directly to the Time Capsule, but 3 days later and i'm still copying files..
to put some context into this, I copied over 1.8Gb today and it took about 4 hours...
has anyone had this problem before?? what on earth is going on?? is it down to fragmentation, or something else?? the TC has been working fine up until a few weeks ago when i started to notice slow speed.
any ideas ?
thanks
Adam

if anyone ever has this issue ....
it must have been EXTREME fragmentation. I bought another 2TB external disk, connected it to the TC, did a complete archive, which took around 24 hours... then i wiped the TC and put stuff back... it now works fine again...

Time machine backup is very slow after migration to Mountain Lion

After I migrated to mountain lion, Time machine backup is very slow. Time machine preference says there is no previous back up although I had Time machine on before migration. It did not help verymuch to connect an ethernet cable between my timecapsule and my Macbook Pro
Here are the screenshots I see:
Should I erase the previous backup made on Lion before backing up on Mountain lion? in this case how do I transfer the Lion backup file on another disk just in case something goes wrong before I have a good backup under Mountain Lion? just like any other file?

After further reading on the forum, the problem was solved: I used the possibility to back up on a second disk (in the preferences Time Machine choose a disk and save on both disks) to make a back up on another usb disk, and then erased the old .sparsebundle file on my Time Capsule. I have then re defined time capsule as the back up disk and then the backup was muuuuuch faster (one night instead of less than 1 giga after 3 days.....)

How to health check time capsule disk

how to health check time capsule disk?
when doing time machine backuping and copying files into time capsule, it would take ages and very long time.. is the disk going to die soon?
is there anyway i can check the disk?
my time capsule is 2TB current model.
please help.
thank you.

Time Machine automatically checks the backups on the disk. It does a quick check (a few seconds) before every backup, and periodically (every month, I think) does a much more thorough check.
You can do that yourself, by holding the Alt/Option key while selecting the TM icon in your menubar, and selecting Verify Backups. That may take quite a while, if you have a lot of data. I'd recommend connecting via Ethernet, as it will still be slow, but 2-3 times faster than WIFI.

Unable to delete files from Time Capsule disk

A while back I copied my user folder from my iMac on to my Time Capsule disk, which is mounted as a drive on my iMac's desktop. I now want to delete that copy. After some struggling with locked files I have managed to get it so that all I have left is a small hierarchy of folders containing no files. When I try to delete any of these folders, though, I get the error message: "The operation cannot be completed because you do not have sufficient privileges for some of the items." Info says that I have read & write privileges to every folder in the hierachy.
Can anyone suggest a way that I can get rid of these few remaining folders? They are really bugging me!

Some of you are going to love this!!
Ok, after talking with someone at Apple, I was reminded of a simple Unix Command to do the job, even on Time Capsule. Here's what worked for me:
Time Capsule is connected to my Mac, via an Ethernet cable-- I don't know if this matters or not, maybe it will work over the wireless connection too, let me know!
You'll need to pull up Terminal in Applications > Utilities. It's a dangerous tool that Unix and Linux people use with skill all the time, but you have to be careful, cause it will cause permanent changes-- that is what I want here, of course. Just be extremely careful, ok? You have been warned.
type "cd /Volumes"
press Return
Now you're in the "Volumes" folder
type "ls" (as in the letter L)
press Return
You should see your Time Capsule folder (whatever you named it)-- type "cd " and that particular name
Navigate till you can type "ls" and you can see the folder you are trying to delete.
Then, the command that worked for me is this:
(Please double check that "myFolderToDelete" is indeed the one that you want to delete!)
sudo rm -rfd myFolderIWantToDelete
After a few seconds for the hard drive in the time capsule to spin up, it worked! Yea!
In fact, to be safe, if I were you, I would even go into Finder first and try to rename that folder, call it "myFolderToDelete" !!!
Why didn't I try this before? I've used Terminal, I should have thought of it before! bad nerd!
But the important thing is, problem solved .
A few things to note is that I was trying to delete a folder full of "Locked" files. If I wanted to delete several locked files that are not currently in a folder, I could make a new folder, and drag those files into it... now you have a folder you can delete. Just rename it "toBeDeleted" or something like that.
Finally, note that I am not currently using Time Machine (the automated backup program) with this Time Capsule, so I don't know if it will delete the Time Machine backup -- haven't tried that yet.
Good Luck!

Time capsule disk operations very slow

Similar Messages

Maybe you are looking for