Time capsule does not allow me to select bridge mode or manual setup

I've got an Aztech combined router and modem. I have disabled its wireless feature, and from what I have read, understand that I need to set up the Time capsule in manual mode in order to have a bridge connection (?). I've reset the TC several times, but the manual setup option or the bridge connection option does not seem to be available. I can backup fine, but want to use the router facility given the price I paid! If I try to edit the router mode with the TC already setup, the option to change it is greyed out (DHCP & NAT)
Bit of a novice at these things, so any help greatly appreciated!

You need to make sure your ISP supports pppoe as a method of authentication.. if so then you must bridge the Aztech modem.. so it no longer handles the connection.. look up the manual for the modem to find out how to do this.
With the modem bridged.. reset the TC and the airport utility should recognise that it is now needing to run in router mode.. you are running Lion or ML and v6 utility has no manual setup.. it auto sets bridge. You need to force it to router.. but by default from reset the TC will be router.. you then need to setup pppoe client.. have no idea how to do that in v6 utility.. I am pleased to say!!
If you run lion.. download and install the v5.6 utility.. then all your troubles will go away.. it is a tool.. rather than Lion version being a toy utility.
http://support.apple.com/kb/DL1482

Similar Messages

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

When clicking on a lookup, firefor does not allow me to select from the list

When I use firefox, the website I am on has lookup fields located on it, firefox does not allow me to select my preferred option from the list. also when I slect another lookup from a list it displays the message 'invalid lookup value located in field ......'
This does not happen in IE

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How do I remove the Windows partition? Boot Camp Assistant does not allow me to select the remove option.

I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?

You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

My Time Capsule is not allowing other wifi device to connect. Even my PC which is plugged to the Time capsule. How to let all device connect and my PC too?

My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?

My Time Capsule is not allowing other device to connect. My Mac Air did the setup and connection and it is. Now Iphone and Ipad are seeing the network but are unable to connect. Same with my desktop PC connected to the time capsule and not able to reach the net. How to fix this?

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Time capsule does not appear in shared devices

All of the sudden my Time Capsule does not show up in the shared devices. It's all up to date, it is working fine as a router and internet connection works fine. It also show up in the airpot utility and the light is green however it does not show up on the shared devices so I cannot access the data folider anymore.
Furthermore Airport utility indicates that the disk is damaged but I cannot repair it because I cannot access it.
Any ideas? (beside doing a reset which I have already done)

That is bad.. the light should not be green unless you told the TC to ignore the problem.
A damaged disk has to be replaced.. if the SMART has gone off or is showing as bad or no capacity then you need to replace the disk (or if under warranty.. the whole TC).
How old is the TC?
Model number from the base A1xxx helps.
You can try doing an erase from the airport utility if the disk shows up at all. But if SMART has gone off the disk will need replacement anyway.
If less than 1year return to apple for warranty replacement.. and if you have applecare on a computer it will cover the TC for up to 3years although the rules are strict.. so check.
See instructions for removal of the hard disk.
http://www.ifixit.com/Device/Apple_Time_Capsule_Model_A1302
Certainly if the TC is older than 3years.. it might be better to consider replacement. Certainly replacing a hard disk could be just short fix until the power supply also goes.

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

HT201250 My time capsule is not allowing a back up indicating the 'time capsule is already in use'. The system is set to back up and remove the oldest back up so it is not 'in use' as far as can see. I believe something is in error. Thoughts?

I am new to this capability. My problem is that my time capsule is not allowing a back up and indicates, The Back up 'is already in use' yet I have made no changes since I set the system up and now I am seeing this failure. Thoughts?

Thoughts?
Bugs in Mavericks.
Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes, then try a backup

Time Capsule Does Not Port Forward FTP Ports

Hey there,
I recently purchased a Time Capsule, and I found out that while it fixes the NAT-PMP bug found in my previous AirPort Extreme Base Station (Gigabit-N), it introduces a new problem which makes it refuse to forward port 21 properly.
It seems to me that the Time Capsule has some sort of FTP server built in, and is either enabled but closes connection on client connection, or disabled but still listens for client connection.
This message is what I get when I connect to my IP via FTP from the WAN side (FTP port forwarded to a local machine with an IP 10.0.0.8):
421 Service not available, remote server has closed connection.
When it is accessed from the LAN of course, I can connect to 10.0.0.8 with no problem. However, what is interesting is if I connect to the Time Capsule via FTP I get this as well:
421 Service not available, remote server has closed connection.
Thus, I am 100% certain that the FTP message I see when I connect from WAN is from the Time Capsule instead of the machine I port forwarded to.
Apple needs to fix this annoying problem and at the same time fixes some VPN issues I'm having with my Nortel VPN client (4.68). It was all working when I had the AirPort Extreme Base Station.

I am having a problem establishing an FTP session that is started with my FTP Client (CuteFTP) on my local network and attempting to connect to an FTP Server with one of my hosting providers. My first few attempts used FTPS (Secure FTP) as that is what I typically use when transferring FTP packets over the net. Well, this didn't work so I thought maybe the Time Capsule had a problem inspecting the encrypted packets so I switched to standard clear-text FTP just to see if the Time Capsule handles FTP session management functions correctly. This didn't work either. I'm using PASV FTP and have never had a problem before with my CISCO Router or with another consumer-based NAT router. I don't believe that the Server on the Internet gets the initial request on port 21 as I believe the Time Capsule is not allowing the packet to pass and my FTP Client spits back an error message : "Couldn't access FTP service " "Connection Failed". I have also used "Terminal" and initiated the ftp utility and attempted to connect to the same server and receive the following error message : "421 Service not available, remote server has closed connection.". I have attempted to put my computer in the DMZ by using the Default Host feature on the Time Capsule but that resulted in the same errors. I believe that I have tried most of the settings available on the Time Capsule to attempt to get this to work but no luck yet. If the packet is getting through to the server and the response back on the current ephemeral port is not getting through the Time Capsule I'm really hoping the solution is not having to port map all ephemeral ports as this is in the tens of thousands. Has anyone successfully established an FTP Session (Secure or Not) from your local client through the Time Capsule to a Server on the Internet. If so, could you help by providing any Time Capsule settings that were required for this to function properly....Thanks in Advance.
Note: I have attempted to ftp to several different public ftp servers on the Internet and get the same error results. I have no problems ftping to local serverson my local network.

TS1398 My Iphone does not allow me to select the Wi-Fi setting. It all grey and says no Wi-Fi, need assistance to know how to fix this.

My iphone does not allow me to select the Wi-Fi setting. It is all grey and says no Wi-Fi. How can I fix this problem?

Thank you for that. I've been on the web trying to work it out and resetting my phone etc and no luck. Thank you so much for your help. Guess I'll be making plans for a trip into Apple.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Time Capsule will not allow new Port Mapping

Set up a new time capsule, did not migrate setting from old just in case I needed it for a backup,
Gave the new time capsule the same name and all other information, just as the original to clone it.
With the exception of all the port mappings; system allowed me to setup "Personal Web Sharing, IMAP Mail, IMAP Mail with SSL, POP Mail, SMTP Mail and Apple Remote Desktop, but will not allow me to add any others with names like, Kerio Workspace, VPN, SSL Web, some have the same Private IP as the allowed port mappings and other have different ones.
what am I doing wronge?

Loads.. one of them being vpn passthrough having issues due to the TC using IPSEC internally for BTMM.
You might find this is not possible to fix.. but make sure the TC is not double NAT.
If you have another router in the network the TC must be in bridge.. but if the TC is the main router and no double NAT you might need to replace it with something less Apple!! Something that tells you by logs and SNMP what is going on.. and keep the TC bridged for TM backups and wireless..
Sometimes it is easier to surrender.. than fight city hall.

Time capsule does not show the blue bars near backing up. Any idea why?

Time Capsule is not showing that it is backing up. Any idea why?

For some reason it was going in a loop. Support had me omit some com.apple....plist files. Retarted and Tiime Capsule started as though it had never seen the external hard drive. I set it up again and it worked fine.
Thank you,

Time capsule does not allow me to select bridge mode or manual setup

Similar Messages

Maybe you are looking for