Time Capsule does not appear in iPhone 4 wifi network setting

I just set up Time Capsule on my IMac. I was able to connect to the wifi network but do not see the TC on my phone's wifi network settings. I have the Airport Utility app and I do not see my phone on the any of the Airport utility maps on the Mac or phone. I tried to set up my IPad 3 and no luck it only recognizes the wifi network and not TC.
I tried to use the demo that appears on Apple's TC info link and I do not see the same info on my phone when following the directions. I am a new IMac user my be I have a setting wrong. Please help.
http://www.apple.com/timecapsule/wireless.html

The iOS devices seem to have issues if the wireless name is AFP type..
I suggest you go back into the TC setup.. you may need to use 5.6 utility.. to get finer controls.
http://support.apple.com/kb/DL1482
Change the wireless name to short, no spaces pure alphanumeric.. I also recommend a different name for 5ghz wireless in the advanced wireless page.
Set the wireless to fixed, a/n - b/g
And then lock the wireless channel.. for 2.4ghz, set to 1, 6 or 11 in turn as the only non-overlapping channels.

Similar Messages

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

Time capsule does not appear in shared devices

All of the sudden my Time Capsule does not show up in the shared devices. It's all up to date, it is working fine as a router and internet connection works fine. It also show up in the airpot utility and the light is green however it does not show up on the shared devices so I cannot access the data folider anymore.
Furthermore Airport utility indicates that the disk is damaged but I cannot repair it because I cannot access it.
Any ideas? (beside doing a reset which I have already done)

That is bad.. the light should not be green unless you told the TC to ignore the problem.
A damaged disk has to be replaced.. if the SMART has gone off or is showing as bad or no capacity then you need to replace the disk (or if under warranty.. the whole TC).
How old is the TC?
Model number from the base A1xxx helps.
You can try doing an erase from the airport utility if the disk shows up at all. But if SMART has gone off the disk will need replacement anyway.
If less than 1year return to apple for warranty replacement.. and if you have applecare on a computer it will cover the TC for up to 3years although the rules are strict.. so check.
See instructions for removal of the hard disk.
http://www.ifixit.com/Device/Apple_Time_Capsule_Model_A1302
Certainly if the TC is older than 3years.. it might be better to consider replacement. Certainly replacing a hard disk could be just short fix until the power supply also goes.

Time Capsule does not appear in AirPort Utility after Yosemite upgrade

Just upgraded to Yosemite and the Time Capsule appears as a shared device in Finder, but does not appear in AirPort Utility. Any solution to this so I can manage my Time Capsule again?

I'm having the same problem. Did you reset your Time Capsule to factory settings or simply restart it?

My external hard drive connected to my time capsule does not appear in Finder

My Mac formatted external hdd doesn't appear in the TC folder in finder. It did once, but every time i shut down the computer or don't use it for a long time, it dissapears and only appears again if i disconnect it, connect it back again and try this 4-5 times. I do have the latest software updates on both computer and TC so that's not the problem. The hdd has it's own power supply aswell.
I know this is a somewhat common problem for airport extreme users, but so far no one has given me an answer good enough so the problem still exists.

Well, let's see...
I've updated the software on the TS
I formated the ext hdd to mac os x and then copied all my stuff back again.
I've tried to disconnect it and reconnect it.
I've tried to use the ext both WITH the power supply and WITHOUT it. In both cases the hdd starts up as I connect it to the TS, the blue light is turned on (on the hdd) and you hear the drive spinning, but it has a really hard time showing up in finder.
Whenever I connect the ext hdd to my computer it always appears, so it's clearly no problem with the hardware.
Unfortunately I don't know any one else who has a TS och Airextreme, otherwise I would've tried it on their.
Sometimes it just appears in finder as it should after some reconnecting, but I have no clue when or why.

Time Capsule crashing; not appearing in AirPort Utility

Hi all
My Time Capsule keeps on crashing, and is currently not appearing in the AirPort Utility window. I restarting it by unplugging it and plugging it back in again, but it will randomly crash again, or the sessions will be interrupted on the TC drive and the additional HDD that's plugged into it. I'm not really sure what's going on here. It's not like I'm sitting too far away from the Time Capsule (less than 3m, in fact).
The only thing that's going on that could be causing this, as far as I can see, is my attempting to migrate my files and folders from my old PowerBook to my new MacBook Pro (a procedure that is not, in all honestly, going all that well).
Thanks in advance

Rob,
If you don't mind a few more suggestions...
*_Time Capsule Weak Signal Strength / Dropped Connections_*
Forgive the size of the post, but the suggestions below have helped others with similar issues. Try each topic individually and see if things improve, If not move on to the next one.
*Keep the Time Capsule Cool*
Some posters have observed that when they positioned the Time Capsule for better ventilation and cooling, their network connectivity issues resolved themselves. Also avoid locating the devise within poorly ventilated cabinets or piling items around or on top of it.
*Time Capsule Orientation*
While the location you chose to setup your Time Capsule may be acceptable, but the direction it is oriented can have an effect on signal strength. It appears that the signal of the Time Capsule does not radiate equally from all sides of the devise.
The antennas within the devise are positioned along the 3 smooth sides. That is, there is no antenna on the side bearing the ports and cables. As a result, position the devise with the ports and cables AWAY from the direction of most of the clients that will be connecting to it.
*Cordless Phones*
Some users have discovered that the cordless phones they have in the home occupy or are near the same bandwidth as their wireless network (2.4Ghz or 5Ghz). Try temporarily disabling the handsets and their bases and see if network connectivity improves. If so you may need to change the channel that the phone uses or purchase phones that occupy a different bandwidth.
*Proximity To Other Devices*
One poster observed: “Finally have full access, full speed, and full functionality. Initially I installed the Time Capsule at the location of my cable, cable modem... which of course was next to my HDTV, DVD, Apple TV, Amplifier, etc. Get the picture? After about 4 weeks of starts and stops, resets and repeated initial backups, I moved the unit to another location, closer to my Mac, and in an area where there are no other electronics. Now, it runs perfect.” [http://discussions.apple.com/thread.jspa?threadID=1734818&tstart=0]
*Change Firewall Settings* #
Go to System Preferences --> Security.
Click the Firewall tab.
Change setting to “Set access for specific services and applications”.
The System will now ask you when each process wants to penetrate the firewall. Once you click “Allow” each time you are asked, it will be saved in the pane at the bottom of this window and it should never ask you again.
One poster observed, “Since I made this change, my wireless has been strong and Time Machine works like a champ and the impact on my network performance is minimal. I speculate that the change in performance is due to security protocols or services that run in the 'allow all incoming connections' and 'allow only essential services' modes. Whatever the reason this fix has worked for me for over 2 months without resetting my airport connection or time capsule.” [http://discussions.apple.com/thread.jspa?messageID=8348496#8348496]
*Change Time Capsules’ Channel*
Launch Airport Utility.
Select the device on the left.
Click "Manual Setup."
Select “Airport” in the toolbar.
Click the "Wireless" tab.
If “Channel” is set to “Automatic” try changing to a different one. Holding the Option key down and clicking the drop-down menu should provide more channels to choose from. If you have another wireless router operating, ensure that each devices’ channels are as far apart as possible.
Click “Update”.
Close Airport Utility.
*Preferred Networks & Airport Services*
You may be experiencing interference from other networks in your neighborhood. When you click the Airport menu are there other networks listed other than your own?
If so, is your network at the top of the list? It should be.
Go to System Preferences --> Network --> Select Airport on the left.
Click "Advanced". In the “Airport” tab note the various local wireless networks that Airport detects. Is the network you prefer to connect to at the top of the list? If not drag it to the top. Are there other networks you never intend to connect to (an old work network, or a neighbors network)? Then highlight them and click the "-" button.
Make sure “Remember any network this computer has joined” is checked.
Click "OK".
For "Network Name" be sure your network is selected and then click "Apply".
Is Airport (wireless) your primary means of connecting to your network? If so, is Airport at the top of the list of services on the left? It should be.
Click the small “Gear” button at the bottom of the window and select “Set Service Order”.
Now drag Airport to the top of the list.
Click “OK”. Click “Apply”.
Now see if network connectivity has improved.
*Transmit Power & Wide Channels*
If you are using the 802.11n only (5GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Select “Airport” in the toolbar.
Click the “Wireless” tab.
Click “Wireless Options...” at the bottom of the window.
Adjust the “Transmit Power” to 100%.
Put a check mark in the box labeled “Use Wide Channels”. (If you are using a 802.11a/b/g (2.4GHz) radio mode then select “Interference Robustness”)
Click “Done”.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network speeds improve.
*Faulty Airport Card*
One poster reported: “I reckoned the fault must be with the Macbook’s hardware so took the plunge and got a new airport card fitted to my Macbook and now everything is working fine. At last I have a working Macbook!” [http://discussions.apple.com/thread.jspa?threadID=1719326&tstart=0]
If you think this might be the case, follow the steps outlined in this KB article to determine if your Airport card is still being detected by your system:
[http://support.apple.com/kb/HT2601]
Let us know if any of the above helped improve your situation.
Cheers!

Time machine does not appear to backup an external HD. how do I get that included in the backup?

time machine does not appear to backup an external HD. how do I get that included in the backup?

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

Your computer's timezone does not appear to match your user setting of

I get this message on a top bar: "Your computer's timezone does not appear to match your user setting of (GMT- 06:00) Chicago. ''Click here'' to update your settings. Alternatively, ''hide'' this message.
My computer timezone is not Chicago. Why is Firefox giving me this error? Should I just hide it and ignore it? Well, there were a few error with a web app I am developing related to 1 hour off inputs. Something is wrong. Any guesses?

Figured out the issue and can reproduce it; it has to do with a particular website: support.atlassian.com; one gets there if they have purchased any of the company's products.
I will let them know and let it go. Thanks :)

IPhone 4 does not see my home WiFi network anymore.

All of a sudden, a few days ago, my wife's iPhone 4 (initially with iOS 6.0.1, now with iOS 6.1) does not see anymore my home WiFi network (created by a Time Capsule), to which it connected automatically.
This has worked flawlessly for years but now the home network (nothing has been changed to its configuration) does not appear in the list of networks seen by the iPhone 4 (mine, iPhone 5 - iOS 6.1 - has no problem at all) and when trying a manual connection I get an error message saying that the network was not found. When I tested, I was a feet away from the Time Capsule.
I have turned the iPhone off and on again twice, to no avail. Just to try something, I created a new WiFi network from my iMac and it was immediately seen by the iPhone 4.
I don't see what could explain these symptoms and what would be the cure.
Help welcome
Thanks
Jacky

No luck. It changed nothing to iPhone behaviour.
Thanks anyway.
Jacky

Time machine does not appear in Disk Utility

Time machine does not show up in Disk Utilities, connected by ethernet. I need to erase the disk. How to solve?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Time Machine does not appear to auto delete old backups

I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning), and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
I am using an OWC Mercury Elite AL Pro 2TB external drive with an eSATA connection. Our typical business files can range from 100 to 300MB each. In the Apple Support Mac 101 Time Machine article it states "As your backup disk begins to fill up to its capacity, Time Machine intelligently deletes the oldest backups to make room for newer ones (and will alert you if the "Warn when old backups are deleted" option is selected in Time Machine preferences)." To date, this warning has not appeared making me think no deletions have occurred.
Thanks for any thoughts, Scott

Scotttt wrote:
I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning)
The oldest backup(s) won't be deleted until there isn't room for a new one. And "warning" is a bit misleading -- when there isn't enough space, the backup will fail, without deleting anything, until you deselect the option. See #C4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Note that this has changed for Snow Leopard; it does the deletion(s) automatically, then sends a notice.
and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
Yes. That accomplishes nothing. Time Machine manages it's space automatically.
To date, this warning has not appeared making me think no deletions have occurred.
That's not strictly true; it applies only when Time Machine has to delete your oldest backups to make room for new ones. But it also deletes "expired" backups every time it does a new one. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Email sent from MacBookAir does not appear on iphone or other windows?

Hi All,
Just started using MackBook Air, love it. Can someone guide me please. When i send an email from MacBook Air, it does not appear in the "Sent" folder on the iphone or other computer?
How can i fix this issue, so that whatever email i send using yahoo or etc, appears on all, ie MacBook Air, iphone, windows.
Thanks
A

That will happen under two conditions:
You have an IMAP mail account, such as iCloud.
You select the option to store sent messages on the server in the account settings.

HT204291 Airplay icon does not appear on iphone 5 to watch on Apple TV

No previous issues with my iphone 4s. Can stream on Apple TV my itunes library but cannot watch videos or pictures from phone because the icon does not appear on my phone.

Thanks to @Winston Churchill - I found the answer. Had to reset my router. All is working again!

Time Capsule does not appear in iPhone 4 wifi network setting

Similar Messages

Maybe you are looking for