Time Capsule does not show backups but

Timw Capule does not show backups but the Time Machine Preferences shows the dates of the oldest and latest backups. I shortened the name of the Time Capsule even though it was not over 27 letters. Sill can not see any backups when I enter Time Machine. It only shows NOW.
This occurred today, June 1st. I has a problem when I connected for the first time in May and it eliminated all prior backups for over 6 months and began with a total new backup. It does not seem to like new months.

This problem is typical of Time Machine on Mavericks.. have you upgraded a computer. When you started using Mavericks it will probably destroy all your old backups. But if you are trying to find a particular file, use the method in Pondini here to open the sparsebundle in Finder. You will not see anything via the TM in Mavericks.
http://pondini.org/TM/15.html
You can and should read all the FAQ from 14-17 to understand other options for accessing old backups.

Similar Messages

Time capsule does not show the blue bars near backing up. Any idea why?

Time Capsule is not showing that it is backing up. Any idea why?

For some reason it was going in a loop. Support had me omit some com.apple....plist files. Retarted and Tiime Capsule started as though it had never seen the external hard drive. I set it up again and it worked fine.
Thank you,

Time capsule does not appear in shared devices

All of the sudden my Time Capsule does not show up in the shared devices. It's all up to date, it is working fine as a router and internet connection works fine. It also show up in the airpot utility and the light is green however it does not show up on the shared devices so I cannot access the data folider anymore.
Furthermore Airport utility indicates that the disk is damaged but I cannot repair it because I cannot access it.
Any ideas? (beside doing a reset which I have already done)

That is bad.. the light should not be green unless you told the TC to ignore the problem.
A damaged disk has to be replaced.. if the SMART has gone off or is showing as bad or no capacity then you need to replace the disk (or if under warranty.. the whole TC).
How old is the TC?
Model number from the base A1xxx helps.
You can try doing an erase from the airport utility if the disk shows up at all. But if SMART has gone off the disk will need replacement anyway.
If less than 1year return to apple for warranty replacement.. and if you have applecare on a computer it will cover the TC for up to 3years although the rules are strict.. so check.
See instructions for removal of the hard disk.
http://www.ifixit.com/Device/Apple_Time_Capsule_Model_A1302
Certainly if the TC is older than 3years.. it might be better to consider replacement. Certainly replacing a hard disk could be just short fix until the power supply also goes.

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

Time Machine does not show after installing Lion?!

I upgraded to Lion and now my Time Machine does not work. When I connect the disk it starts and then shuts down. It does not show neither on desktop or on Time Machine. Any ideas. I hate the thought of reinstalling Snow Leopard but...
Thank you in advance
Matej

No reason to reinstall Snow Leopard.
What's shown on the Time Machine Preferences window for Latest Backup? If it shows "Error" in red, see #C2 in Time Machine - Troubleshooting.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

When I turned on my device the inbox mail was empty, in time machine does not show options to find old back up, only inbox is not listed... how I can get my inbox emails back?

I turned my macbook on and all the emails of inbox were gone. In time machine, only the inbox option does not shows option to get back old back ups... how I can get my inbox emails?

I figured it out. I couldn't see the old backups because the sparsebundle had not been properly unmounted in a previous session, so it kept giving an "already in use" error. The problem was solved by restarting the Time Capsule through the Airport Utility, mounting the sparsebundle by double-clicking it, and then going through the "Browse other backup disks" option in the Time Machine menu bar icon.
The following links were helpful in figuring this out:
http://pondini.org/TM/C12.html
http://pondini.org/TM/17.html

Time Capsule does not indicae space available/used

I recently purchased a new computer and restored information from my Time Capsule, which worked perfectly previously.
My problem is...when I open Time Machine Preferences...it will show the Name of Time Capsule, Oldest Backup time, Latest Backup time, and Next Backup time...what it does not show is Available Space...by that category it looks like this...Available:-- . If I start the backup it will show up and when backup is completed it drops off...
Please advise...

"Available ---" is what I see as well. In normal conditions the Time Capsule disk is only mounted when a backup is occurring or when you're running Time Machine. At other times the disk is offline to your computer. It Time Machine tried to give you storage statistics at that point, in the general case it couldn't guarantee that the numbers were accurate.
If you always want Time Machine statistics, then always mount your Time Machine disk.

Report does not show data , but data exists in the cube.

Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)

Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK.

SE19 does not show implementation but SE24 shows me the z class why?

Hi
I implemented 2 badis 1) change_matmas 2) check_data.
When I moved it to production and go to SE19 system does not show me the implementation but if I go to SE24 , I can see the implementing z class. What has gone wrong? if there is any problem how can i correct it. I am updating a custom table through these badis and that custom table is not getting updated . That means the badis have not been implemented???
Need help
Thanks in advance

You forget some objects in your transport request (forget a request or used a $TMP like local package)
When a new BADI is transported, there must be in the transport request, at least TWO objects
- R3TR SXCI <implementation name> - the Business Add-Ins - Implementations
- R3TR CLAS <generated class name> - the Class (ABAP objects)
Look for the request containing the BADI implementation with transaction SE03 in your dev system, there should be a request with this object, else create a new request with it and transport it (add the implementation via SE01/SE09 or call transaction SE19 and deactivate/reactivate the implementation)
NB: If the BADI implementation belongs to a local package (eg. $TMP) change the object directory entry via SE03 (node : Change Object Directory Entries ) or SE19 (menu : goto, object directory entry) - A transport request will be generated
Regards,
Raymond

Time Capsule Does Not Port Forward FTP Ports

Hey there,
I recently purchased a Time Capsule, and I found out that while it fixes the NAT-PMP bug found in my previous AirPort Extreme Base Station (Gigabit-N), it introduces a new problem which makes it refuse to forward port 21 properly.
It seems to me that the Time Capsule has some sort of FTP server built in, and is either enabled but closes connection on client connection, or disabled but still listens for client connection.
This message is what I get when I connect to my IP via FTP from the WAN side (FTP port forwarded to a local machine with an IP 10.0.0.8):
421 Service not available, remote server has closed connection.
When it is accessed from the LAN of course, I can connect to 10.0.0.8 with no problem. However, what is interesting is if I connect to the Time Capsule via FTP I get this as well:
421 Service not available, remote server has closed connection.
Thus, I am 100% certain that the FTP message I see when I connect from WAN is from the Time Capsule instead of the machine I port forwarded to.
Apple needs to fix this annoying problem and at the same time fixes some VPN issues I'm having with my Nortel VPN client (4.68). It was all working when I had the AirPort Extreme Base Station.

I am having a problem establishing an FTP session that is started with my FTP Client (CuteFTP) on my local network and attempting to connect to an FTP Server with one of my hosting providers. My first few attempts used FTPS (Secure FTP) as that is what I typically use when transferring FTP packets over the net. Well, this didn't work so I thought maybe the Time Capsule had a problem inspecting the encrypted packets so I switched to standard clear-text FTP just to see if the Time Capsule handles FTP session management functions correctly. This didn't work either. I'm using PASV FTP and have never had a problem before with my CISCO Router or with another consumer-based NAT router. I don't believe that the Server on the Internet gets the initial request on port 21 as I believe the Time Capsule is not allowing the packet to pass and my FTP Client spits back an error message : "Couldn't access FTP service " "Connection Failed". I have also used "Terminal" and initiated the ftp utility and attempted to connect to the same server and receive the following error message : "421 Service not available, remote server has closed connection.". I have attempted to put my computer in the DMZ by using the Default Host feature on the Time Capsule but that resulted in the same errors. I believe that I have tried most of the settings available on the Time Capsule to attempt to get this to work but no luck yet. If the packet is getting through to the server and the response back on the current ephemeral port is not getting through the Time Capsule I'm really hoping the solution is not having to port map all ephemeral ports as this is in the tens of thousands. Has anyone successfully established an FTP Session (Secure or Not) from your local client through the Time Capsule to a Server on the Internet. If so, could you help by providing any Time Capsule settings that were required for this to function properly....Thanks in Advance.
Note: I have attempted to ftp to several different public ftp servers on the Internet and get the same error results. I have no problems ftping to local serverson my local network.

Why some times jdeveloper does not show a coreect design view ?

Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanks

Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald

An app does not show up but is found in search

after setting up my new phone i have at least one app that's icon is not showing up on any of the pages. yet when 'searched' for on the phone it is found and can be used. the app does not show up in my updates list for the app store either, so the phone must know it's installed. what could cause this icon to not be visible and how can i correct this?
thanks.

Any error message?
Is the app stuck on "waiting"?
What happens when you try to redownload it?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Try downloading on computer and syncing to the iPod.

Time Capsule does not show backups but

Similar Messages

Maybe you are looking for