Time capsule drive not recognized

I have installed my Time Capsule using Airport.
The internet connection works fine.
But unfortunately the capsule doesn't recognize the hard disk (or another drive connected via USB on the capsule).
The drives were available in earlier cases, but not always!.
Hope you can help,
Peter

The drives were available in earlier cases, but not always!.
Sorry but this is difficult to follow.. in what cases were the drives available.. ?? When were they not available?
The USB drive must be FAT32 or HFS+ formatted.. and it must be GUID partitioned but that seems less of an issue. It is very possible you need a powered hub, as the TC does have port issues.. and it has nothing to do with the powered drive.. it still needs a powered hub.. and just to be fun.. not all powered hubs work. There is a limited number of drivers in the TC.. the powered hub that works on a Mac does not necessarily work on the TC.

Similar Messages

OsX Mavericks and Time Capsule Drive not connecting

Hi,
I upgraded to Mavericks today and I am now trying to access my 2 TB Time Capsule Hard Drive. I get an error that says: There was a Problem connecting to "XXXX Time Capsule" Server. I also use the Time Capsule for my wireless network, which is working fine. When I go into the AirPort Utility and try to see the Time Capsule info it constantly asks me to put in my password and once I do nothing happens, but the password request appears again in a few minutes. Both my iPhoto and iTunes libraries are stored on my Time Capsule as well as my Time Machine Backups. It has not been able to perform backups either, since it cannot connect to the disk. I am running a MacBook Pro 2010.
Has anyone else had this problem thus far? Is there a workaround for this or an update I should do?
Thanks!!

Howdy seanay89,
It sounds like you are unable to make a Time Machine backup becuse the disk is not connecting correctly. I want to recommend these links from the article named:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/HT3275
Red "i" message: "The backup volume could not be mounted" or "The backup volume could not be found." appears when using network volume or Time Capsule
Time Capsule: Time Machine backups do not mount
Mac OS X 10.5.3 or later: Time Machine - "Backup volume could not be mounted" after changing network volume's password
Thank you for using Apple Support Communities.
Cheers,
Sterling

After upgrading to OS X Mavericks, Time Capsule is not recognized

After I upgraded my Mac to OS X Mavericks 10.9, Time Machine stopped backing up to my Airport Time Capsule and now the Mac no longer recongizes the TC device. It is a TC model # A1254, 500GB. Any suggestions for being able to re-connect / re-set-up the TC with Time Macine? Thank you.

Well, it turns out the Time Machine backing up to the Time Capsule (TC) worked only temporaily. Now, it is not backing up to the TC. The Airport utility has a pop-up box which states "Device Not Found Time Capsule was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Forgetting this device removes it from this network." It is in the same room as the Mac and is plugged in and powered up.
When I click on "Other Wi-Fi Devices" in the upper left of the Airport Utility, it states "No new Wi-Fi devices discovered" and "No remote Airport Base Stations discovered."
Now, I am confused, too.
Message was edited by: rprusz

Save to time capsule - drive not showing up

I am new to i-movie (latest version). I ask to see the hard drives because I want to put all my projects and events onto timecapsule. It shows my time capsule in the list of drives once the programme loads but with a hazard symbol. When I create a new movie, only my internal hard drive shows up in the place to select where you want to save to.
How do I save on time capsule?

And according to this link you can't use the USB port to mount Time-Capsule.
http://support.apple.com/kb/HT2421

Time Capsule Drive not showing up on desktop anymore

Hi, every hour when Time Machine would begin backing up data to my Time Capsule, the drive would always show up on my desktop and then disappear when it was finished. Just recently the drive stopped showing up on my desktop, Time Machine still backs up to my Time Capsule. The drive shows up in the finder sidebar. Any help is greatly appreciated

My Time Capsule shows up on my drive but I can't do anything with it. This is in Snow Leopard even after today's 10.6.2 update.
All I get is this message "The alias “TIME CAPSULE” can’t be opened because the original item can’t be found."
I then have three options - Delete Alias - which gives me "The item “TIME CAPSULE” can’t be moved to the Trash because it can’t be deleted."
Or - Fix Alias - which gives me a chance to navigate to the TC but it's all greyed out.
Or - Okay - which it plainly isn't!
I really hoped Apple would fix this. I have another Mac running Leopard and it mounts Time Capsule on my desktop and all it's files are accessible just like any other external drive - exactly how I want it!
cheers
rich

HT1178 air time capsule is not accepting external hard drive content in back up

Own a mac air and have an external seagate hard drive. Bought airport time capsule and want to include or transfer the seagate content to the airport time capsule. I used the seagate drive as external hard drive but want the content to be available in the airtime capsule. When trying to generate back up (while seagate is connected) it only inclydes the content on the mac air flash memory. In the air capsule menu I do see the seagate but I don't believe it is excluded from the backup? Again I want it included in the back up.
Thanks!

The list is backwards.. anything on the list is excluded.. it has to be off the list to be included.. by default external drives are excluded.. you must remove it from the excluded list to include it.
Please note.. sharing content of an external drive via a Time Machine backup is not going to work.
Time Machine is designed to create an exclusive virtual disk on the TC for that particular computer.. although other computers can access it .. it is specifically designed to be difficult.. nor are files in formats that can be used directly.. the file has to be restored to the computer.
Time Capsule is not designed as a NAS and usage of it that way is often going to lead to problems.
Read the info in Pondini how best to avoid the worst aspects of that.
Q3 here http://pondini.org/TM/Time_Capsule.html
Remember if you share files from the TC they have no backups and Time Machine cannot backup network drives.

Time Machine will not backup Time Capsule drive

I was filling up my time capsule so I bought a new 2GB drive for my backups. It is attached as an air disk on the Time Capsule as I also use it to backup other computers in the house.
My problem is that I am now using the HDD in the time capsule for my iTunes and iPhoto library, so that they can also be shared, but they are not being backed up by TM.
I have checked my excluded drives list and the Time Capsule drive isn't in there.
Any ideas/help/advice on how to get the time capsule backed up too?

Sorry, but Time Machine will not backup a network drive (i.e. TC's HDD or any USB HDD attached to the TC). It can backup TO a NAS such as TC or a USB HDD attached to the TC. You can transfer your music to another external HDD that is connected directly to a Leopard-loaded Mac and TM can backup that up to TC/HDD attached to a TC.

Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

Do the usual wireless things.
Change the wireless name to simple name with only alphanumerics and no spaces.
Set to manual and use channels 1, 6, 11 in turn.
For testing take off the security altogether.
The iphone only works on 2.4ghz so only that band is relevant.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

Vista and ipod nano driver not recognized?

My computer (vista) won't recognize my ipod nano second generation. It tells me driver not recognized?
So when I plug in my ipod a little screen pops up and tells me that No drivers are installed for this device. Where can I download a driver
Thanks,
[Income For Life|http://www.website.ws/freedombucks]
Message was edited by: komrad

Apple has release a new version of iTunes 8, in responce the issues with Vista.
1.Unistall iTunes via StartMenu\Control Panel\Programs and Features
2.Delete all previous iTunes installers.
3.Download iTunes 8 from the Apple website.
4.Makes sure you close Outlook and Explorer and all non-essential programs, as it seems to prevent the install at certain points.
5.Install iTunes 8.
6.After the Install is complete, Open iTunes 8 before attaching your iPhone.
7.Unlock your iPhone if it is lock with a pass code.
8.Attach your iPhone, after a few seconds you should see that it has installed a driver for your iphone, then the iPhone will appear in iTunes.
I hope this helps, as I did spend some time with this issue myself.

Use time capsule drive for mass storage instead of time machine

I'm considering buying a new Airport Extreme with the time capsule drive. I'd interested to know if I can use the built in drive as an additional HD verses using it for a back up drive with time machine? I'm aware I can plug in a USB external drive for network storage, but would like to use the built one for storage as well. Anyone know if this is possible?

I just got a 2TB time capsule a few days ago to use as a "poor man's file server" for my iTunes library. Bob makes valid points, and I am aware of the limitations, but I think it will meet my needs for awhile. I am in the process of ripping a large DVD collection and my iTunes library is over 350gb which was starting to feel crowded on my MBA's 512gb SSD.
I have plenty of external USB and thunderbolt drives, but I wanted wireless access to the libary anywhere in the house. With the AC wireless on my 2013 MBA, I wouldn't really classify the time capsule as "quite slow", I'm seeing about 30MB/s for FInder file copies. I have a 1TB USB2 WD Passport drive and the speed is very comparable - about 35MB/s. Sure, it's not as fast as my thunderbolt drive at 190MB/s or SSD at 700MB/s, but it seems to work well for my content (I don't use HD video in iTunes).
The only noticeable issue is that the TC disk spins down almost immediately if it isn't in use, so you get a lag of a few seconds if you pause a movie for a minute. And it takes longer to start iTunes of course. For me, these were acceptable trade-offs to allow my library to grow to 2TB without any directly connected external storage.
I wanted an AC router regardless and the TC gives me a wireless disk for $100 more. In the future I can always add a "real" media server and let the TC do backups. But for now I'm happy with the way it works.

USB flash drive not recognized on desktop or disk utility

I see a number of similar threads to this but nothing solves this problem. Any help will be greatly appreciated as I am about to go crazy!
I have 3 USB thumb drives that all worked 2 days ago - now only one does. I have tried all drives in multiple ports and the same result. I have restarted the iMac (2009 Yosemite) a number of times and the same result.
This came about attempting to create bootable USBs with each of these. I was struggling with the process on my mac so took 2 (brand new 16GB PNYs) to a PC created the live boot USBs and they booted fine on the PC (knowing this wouldn't boot my mac). I did however plug them into my mac and they were recognized. I finally found success creating a Ubuntu live boot with my old USB. With that success I wanted to try with one of the new USBs on the mac.
Here is what I did:
1. Using Disk Utility - Reformatted the drive 1 partition MS Dos FAT 32
2. In Terminal unmounted the drive and ran a dd command to copy the linux .img file successfully
3. Box came up saying drive not recognized and selected to ignore (this happened on my old one that still works also)
4. Ejected drive from terminal
5 Restarted mac and attempted to boot from USB without success.
After this the 2 new USBs were no longer recognized in any usb port while the other still is. They do not show on the desktop nor in Disk Utility. I checked them on the PC and they are still both recognized and showing the FAT 32 format.
Help please!

Thank you for the reply. I found some time to go through this process a number of times without success
Any other suggestions?

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

My time capsule suddenly stopped recognizing my computers.

My time capsule suddenly stopped recognizing both my mac book and my mac pro. It used to work fine and now every time I log into a computer I can't back up (and the time capsule has a green light). I have tried resetting time capsule but no success (maybe I am doing it wrong. Any suggestions on how to fix this problem?

So I have had the same problem, try this fix for Airport Extreme/Time Capsule .
Airport Utility > Select the Extreme/Time Capsule in question > Disks > Disconnect All Users
Reboot the Extreme/Time Capsule in question > once back online > goto Finder > Shared > Reconnect Drive
> Open Time Machine Preferences > Select Disk > Use Backup disk > Backup Now
Good Luck

Time capsule drive not recognized

Similar Messages

Maybe you are looking for