Time capsule drops connection

Mac book has problem with dropping connection to newest Time Calsule.

NHawk wrote:
The first problem is that the time capsule quit performing backups for my laptop.
Welcome to Apple's discussion groups.
For help with your Time Machine problem, check the FAQ and Troubleshooting items at the top of the Time Machine section for OS X 10.6:
http://discussions.apple.com/forum.jspa?forumID=1342
the Time Capsule started blinking yellow and airport utility came up saying there was a problem finding a wireless signal (i think).
Please describe your local network configuration, including brand(s) and model number(s) of all equipment, as well as how everything is connected. It sounds like your Time Capsule is configured to connect wirelessly to a network created by your cable company's router.

Similar Messages

  • Airport Express w/Time Capsule drops connection

    I just integrated my new Time Capsule into our all-Mac network here a couple of days ago and its been fine for the most part but I've noticed that the existing airport express flashes amber for a few seconds every so often (usually once per hour or so) and disconnects everyone sharing files and connections. I have Leopard Server 10.5.2 running as well and this didn't seem to be happening before introducing Server to the mix (it was connected about 48 hours AFTER the time capsule) but the problem seems to lie with the Airport Express. Things are connected as follows:
    Cable modem --> Airport Extreme
    Airport Extreme --> 2 ethernet connections to Macs, 1 ethernet connection to Time Capsule
    Time Capsule --> 1 ethernet connection to Mac Mini running Leopard Server
    I have bridge mode set up and a couple of portables connected to it as well as an Apple TV, all of these seem to be connecting and staying connected just fine - it's the two Mac's connected directly to the Airport Extreme that get hit - the light on the unit (AE) flashes amber for maybe 2-3 seconds and I lose connection to any other macs I was connected to - I can easily re-connect with no problems at all but its obviously kind of a pain when you're working on files from the server, etc. and everything more or less locks up while OS X loses these connections.
    Does anyone have any insight into why this might be happening? I've never had any trouble with this prior to Time Capsule/Leopard Server, both of which I allowed to more or less set their own settings on the Airport Extreme figuring that it isn't too complex a set up or anything, it's not like we're a full on 20 client office here or something, just 5 total macs, no pc's, etc.
    any guidance would be greatly appreciated.

    I'm running into exactly the same problem. Configuration is the same as Jackoschild's. I get about an hour of good connection, then signal drops off and I get a rapid set of connects then disconnects. Very frustrating. I'm considering turning off the Airport on the Time Capsule and going with my 54g wireless built-in to the FIOS router it is attached to. Total of two iMacs running 10.5.2 (one 20" G5, one 24" iMac) and four PCs (Windows XP SP2) demonstrating the problem. I NEVER had a drop issue with the FIOS ActionTek wireless.
    Any solutions?

  • Issues with Time Capsule- Dropping connection daily

    I own a 1TB Time Capsule and use it to store backups and my iTunes library. I have a large library, and I wanted to have a dedicated drive to store all of my songs so they could be accessed by both my PC and MacBook, so I was pointing in this direction at the Apple Store.
    When trying to move files over to the TC from my Macbook, my Macbook will often freeze, and the TC can no longer be found, along with my wireless network. The light remains green, but it is unusable unless it is unplugged from the wall and plugged back in. This has happened daily for the past few weeks, but today has happened 5 times in the past hour.
    It most commonly happens when I am adding songs to my iTunes Library, both from CDs and from files. It should be noted that, when the TC goes down, I also can't access the internet on my PC, which has an ethernet cord from my TC plugged in.
    I'd appreciate any help whatsoever - this is starting to get very irritating.
    Thanks!

    Hi I had similar problems. I moved houses got my own cable modem and tried to use the TC as my wireless, as i had it in my other home. The connection would drop constantly and i was unable to use the TC as a wireless device, it would also freeze my computer (mac book Pro). After asking everyone for help i found that when i moved the TC next to the cable modem in the garage it all worked. Apparently the ethernet cable that ran from the garage to the living room was only using 4 of the 8 pins and thus was dropping the connection. i am now connected directly from the modem to the tc and it has not failed yet (cross my fingers). After all this was suppose to be wireless and thus i don't need to have it right next to my computer. The signal is strong and it has not caused any problems. I didn't mess with the settings after i did a hard reset on the TC. So far so good. hopes this helps.

  • Time Capsule drops connection to iMac

    I've recently got a late 2009 iMac 21.5" and am having issues using it with my Time Capsule. Intermittently the iMac loses connection, it appears to still be connected the the TC but it can't communicate. I've set a ping going to 10.0.1.1 in the Terminal app with no reply and then turn airport off and back on again and hey presto it starts receiving a reply. I've looked at interference, change channel on my TC, no difference. So I ran an ethernet cable into a LAN port on the TC and no it works fine, two days with no drop outs. I don't know what to try next any ideas?

    I think I have the same issue.
    My iMac is connected to the TimeCapsule via ethernet (though I do have wifi running to synch a few apps with iphone).
    My problem is that I have my iPhoto library file on the TimeCapsule so that it can be accessed by other family members.  Almost invariably, when I plug in my iPhone, iPhoto pops up and asks which library to use even though I have indicated that the iphoto library on the TimeCapsule is to be the default. 
    So, in essence, I don't have to log back in, only re-connect almost always which is a pain.
    Any ideas appreciated!

  • Time Capsule drops connection with Windows 7 - KNOWN ISSUE

    There are several sites posting solutions to this problem (example below).
    Solution 1. - revert to older firmware of TC
    Solution 2. - change local security policies
    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
    *Thread from:*
    *http://techsupport.foreverwarm.com/time-capsule-windows*
    Windows Vista and Windows 7 cannot see Time Capsule drive
    This might be your security settings. Open the Local Security Policy utility:
    %windir%\system32\secpol.msc /s
    Navigate to Local Policies folder, Security Options view. Find “Network security: LAN Manager authentication level”. If it is set to “Send NTLMv2 response only” change it to “Send LM & NTLM – use NTLMv2 session security if negotiated”.

    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
    Home Edition users would have to perform a Registry edit as follows:
    1. Open registry editor (ref: Start > Search > Enter: regedit)
    2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
    4. Restart your PC and try the connection again...

  • Time Capsule drops wifi/internet connection and flashes amber

    Time Capsule drops wifi/internet connection and flashes amber.  I've tried unplugging it and my modem but it continues to do this every so often.  The time capsule is out in the open, so I don't think it's a heat issue.  It's running firmware 7.7.3.  Anyone else having this issue?  Any suggestions on how to fix it?  It's driving me crazy!

    Bought the time capsule in Oct 2013.  I have a Sagemcom 2864 modem from Bell but used through Teksavvy.  The 5 ghz has been flaky until I upgraded to Yosemite 10.10.1 I think.  I had a closer look at it and it appears that the wifi is ok.  I was thrown off by the wifi symbol being all animated in the menu bar.  I was able to ping the time capsule via wifi.  All the status lights on the modem looked ok.  Next time it happens, I'll see if I can get some more details.  Do you know if there's anyway to get some logs from the airport utility?

  • I can't get my airport time capsule to connect to the internet

    I can't get my new airport time capsule to connect to the internet. It works fine with my linksys router

    We cannot help with that amount of info..
    What internet type and modem do you have? Exact modem make and model may help.
    Is the linksys router also the modem? You do know there is no modem in the TC?
    How is the Linksys authenticating if it is plugged into the modem??
    If cable did you shut down the cable modem for at least 20min to change the router.. this is always required with cable system.. often the time is longer.. one hour or overnight even.

  • Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    igonneau wrote:
    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
    You can, but how are you going to back up those other files?  When (not if) your Time Capsule fails, you risk losing them.  See #Q3 in Using Time Machine with a Time Capsule for details.
    Then can i access these files only on the time capsule without connecting it?
    Not sure what you mean.  You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk. 

  • Need Help, Time capsule stoped connecting

    need help, time capsule stoped connecting. the yellow light is flashing.
    I have important file that can't lose them, how can I restore connection without losing all files?
    Hope someone can help me
    Best regards
    Chico
    Message was edited by: quicova

    Best thing to do is connect your computer to the Time Capsule (LAN port) using an ethernet cable. Once connected, run Airport Utility and it should let you know why the light is yellow and attempt to fix the problem. If the problem persists, you should either re-configure the Time Capsule properly or conduct a hard reset and start the configuration over from the factory settings.
    http://support.apple.com/kb/HT1300

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • Time Capsule not connected to Ethernet?

    Hello,
    I walked in to my office two days ago and the amber light was blinking with an occasional green (on my Time Capsule).
    The reported error was that the ethernet was not connected. It was. I ultimately disconnected the ethernet cable from my Time Capsule and connected directly to my iMac. After some configuring issues I was on line. Did what I needed to do and shut down.
    Next day  I decided to try powering down the Time Capsule and re-connected the Ethernet cable. Everything worked fine just like it has for well over a year now.
    I figured maybe the cleaning crew bumped the power and everything was fine.
    No dice.
    Came in this morning and the Time Capsule is blinking amber again (with an occasional green) same issue. "no ethernet connected."
    Now I am connected directly to the IMac and asking for help.
    Please.
    Thanks in advance for your help.
    P

    On our TC, the TC shows a green light even when it refuses our computer/device wireless connections and says the password is invalid.  However, I left the house for three hours and am now on my laptop and it is apparently working normally.  I plan to watch it very closely for the next week and see what happens. 
    I have read on here (and other Mac-centric review sites) that TC's are very unreliable, have slower than average wireless connections (and short ranges in apartments, especially through walls/several rooms), and fail within 18 months -- all of which is considered "normal" lifespan by Apple (as confirmed by the Apple employees at the San Diego Store in Fashion Valley). 
    I don't plan on purchasing another TC, and likely not even an Airport extreme.  I will look at buying a more reliable wireless router with stronger (farther) connections and connection ranges. I love apple products and have used them to the exclusion of others for over 15 years, but this is really annoying (and my friends have much better wireless networks!).

  • Time Capsule Not connecting to internet

    Hello. So recently I received a new iMac for Christmas and knowing that my wireless network is setup with MAC address filtering, I used my working laptop to connect to both the Airport Extreme and Time Capsule to add the iMac to the network. That worked and my iMac has been able to connect to the network no problem.
    Let me explain what my network setup is before I tell about the problem:
    I have the latest generation Airport Extreme (Dual Band II) and a first generation Time Capsule (1TB).
    The Airport Extreme is connected to the internet by cable modem and the Airport is the main router sharing a single IP address.
    I connected the Time Capsule to the Airport Extreme through Ethernet and set it up automatically with Airport Utility to extend over ethernet.
    Now up untill now, I had no problems but since I got my iMac, I haven't been able to ever get a list of the Airport devices connected to the network, while connected to the Time Capsule, however, when connected to the Airport Extreme 5GHz network, I'm having no problems.
    And today, the Time Capsule wouldn't connect to the internet over wifi, and all other devices wouldn't either. Of course, I tried to connect to the base station, but Airport Utility wouldn't display any devices connected. This happened with my MacBook as well.
    Since connecting to the 5GHz network from the Airport Extreme, I have no problems with internet or Airport Utility. After a while though, the Time Capsule connected to the internet again.
    Would someone shed some light on the situation?

    I normally use the manual setup mode so I'm not sure what exactly is the end-state when choosing to extend a wireless network with the Time Capsule (TC) connected to the AirPort Extreme Base Station (AEBSn) by Ethernet.
    I am guessing that the AirPort Utility configured the TC as a bridge to allow the AEBSn to still provide both NAT & DHCP services for all wired or wireless clients connected to either router.
    Let's start by double-checking some settings on your TC. Please provide the following TC settings from the AirPort Utility:
    AirPort Utility > Select the TC > Manual Setup > Time Capsule > Wireless
    o Wireless Mode = ?
    o Allow this network to be extended = checked or unchecked?
    o Radio Mode = ?
    o Radio Channel Selection = ?
    Time Capsule > Access Control
    o MAC Address Access Control = ?
    Internet > Internet Connection
    o Connect Using = ?
    o Connection Sharing = ?
    Internet > TCP/IP
    o Configure IPv4 = ?

  • Must Time Capsule be connected by cable to the DSL Router?

    The answer to this question maybe obvious, but not to me: I have a router DSL, via which I get my WiFi internet connection to 3 MACs at home. I'd like to use the versatility of Time Capsule to back up wireless and even do so for each MAC that I have. My question is: *_must Time Capsule be connected by cable to the DSL Router_*, or will it detect it wirelessly once it is plugged into the power mains?

    I think that if your router supports [WDS|http://en.wikipedia.org/wiki/WirelessDistributionSystem] then you might be able to get it to work. The problem is that WDS is not a very good standard so there's no guarantee it'll work.
    [Here is a site|http://jeremy.zawodny.com/blog/archives/002812.html] discusses the topic at length.

  • Help! Time Capsule not connected to the Internet

    Hi everyone!
    I have this problem, and hope someone can help me.
    In my house I have this network
    Modem/Router Netgear DGN2200 connected via ethernet to Airport Express.
    Airport Express is set to create a wireless network, bridge mode.
    In the house I also have a Time Capsule set to extend the wireless network, bridge mode.
    Time Capsule is connected via ethernet to my TV decoder to have extra services through the Internet.
    Ok. All worked fine until a couple of days ago.
    Then, I didn't change anything but Time Capsule (and so the TV decoder) seems to have no acces to the Internet anymore.
    But Time Capsule is still available on the local network, so I can access to it, make backups and so on.
    What should I do?!
    Thanks for your help and sorry for my bad English.
    Matteo

    Did you try a simple reboot of the network devices.. turn off all the network stuff..
    Restart in correct order..
    1. Modem.. wait 2 min.
    2. Express.. wait 2min.
    3. TC.. wait 2min.
    Then try the TV.. if it doesn't work reset both the express and TC to factory.. and redo the setup.. you had them setup correctly but please use SMB names.. since the TV will not talk apple.. SMB names are short.. 2-20 characters.. no spaces and pure alphanumeric.
    so for example the name of the Express.. AEx Name of the TC.. TC1
    Name for wireless. Aex24ghz
    Use a different name for 5ghz if your Express is a dual band latest model. Aex5ghz
    Use fixed channel so that it is locked.. eg. 2.4ghz on channel 11 5ghz on channel 40.
    The TC will follow the wireless exactly.
    See how you go.

  • Can time capsule be connected wirelessly and still use ethernet ports for other devices?

    can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

    Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
    Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
    The wireless can be setup in a number of ways.
    From your convenience point of view use it in roaming network mode..
    you simply give the TC the same Wireless Name as the existing routers SSID.
    Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
    But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
    You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

Maybe you are looking for