Time Capsule duplicating backups and becoming full

My iMac and MacBook Air have been saving their respective backups to Time Capsule without problem for months, until last month. Then in April I started getting error messages saying it could not save a backup because Time Capsule was full.
I understand that Time Capsule normally saves multiple copies of the backups and deletes the oldest, that part is fine.
What happened here is that it actually created a second .1 backup file for each device, and then overfilled.
The finder display looks like this:
Rick's iMac
Rick's iMac 1
Rick's MacBook Air
Rick's MacBook Air 1
The file names it creates are as follows:
file:///Volumes/Data/Rick's%20iMac.sparsebundle/
file:///Volumes/Data/Rick's%20iMac%201.sparsebundle/
file:///Volumes/Data/Rick's%20MacBook%20Air.sparsebundle/
file:///Volumes/Data/Rick's%20MacBook%20Air%201.sparsebundle/
I've tried deleting the extra versions, and they come right back.
Anyone else having this problem and figured out how to solve it?

You are probably better simply erasing the TC and starting over. This kind of stuff happens when you upgrade the OS sometimes. Mavericks being the main culprit for anything bad in TM.

Similar Messages

Can I use the time capsule as backup and hard disk at the same time?

Hi.
I want to buy a time capsule.
I wondered, if I can use the time capsule as backup (over time machine) and as a hard disk at the same time?
If I buy the 2TB time capsule, I wanted to use 1TB for the backup and 1TB for hard disk.
Is this possible?
Best wishes
Sophie

It is not recommended.. the problem being anything stored on the TC only is not backed up and cannot be backed up by the TC itself or Time Machine. So what are you going to do about back.. the TC can and do die suddenly.. and the cost of recovery can be huge.
See Q3 here for the semi-right way to do it if you must.
http://pondini.org/TM/Time_Capsule.html
You can plug a USB drive into the TC and use that for files.. but note, its speed is poor.. fine for wireless as wireless is even slower but you will really notice it if you expect the drive to be as fast as the internal.. it will be a fraction of the internal drive speed. 1/2 write and 1/3 read aprox.
See http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/7

How can I use Time Capsule for backups and an external hard drive?

I have a large file/program on my iMacs hard drive that is 62GB and I would like to keep only things I need on my iMac. I have a 2tb time capsule currently used for backing up. It has roughly 1.66 TB free. How can I move the 62GB program onto my Time Capsule and still use it for backups? Also, is this stable? And don't worry about backing the program up because it came on 8DVD discs.
Thanks.

1. Mount the Time Capsule as a drive and drag the application over to it. If the application requires system components, those won't be transferred; if those are only data files, you may be able to drag them over as well and then create a symlink or alias to a folder enclosing their current location.
2. The application may work slowly if this is done. Note that Time Machine will eventually use up all the free space on the Time Capsule that isn't reserved by being allocated to a disk image.
(66649)

Possible to simultaneously use time capsule for backup + another router for internet?

I will soon be moving into an apartment in which my landlord provides wireless internet through her own router.
I also have my own Time Capsule, which I'd like to continue to use to back up my Mac via Time Machine.
Is it possible to connect to both my Time Capsule (for backup only) and another router (for internet only) at the same time?
If not, can anyone suggest a good workaround?

moskovit wrote:
I've done a little research, and it looks like I might be able to wirelessly daisy chain the two routers, using WDS (wireless distribution system), assuming my landlord's router supports it, but that this would drop the speed of the internet significantly: https://discussions.apple.com/thread/2623802?start=0&tstart=0
It works extremely poorly and the landlord would need to agree to it.. plus it would require use of WEP security which is hackable by children with internet hack kits in about 2min flat. Don't go there. Apple have made their products incompatible with most other routers. So any suggestion of a workaround will involve spending some money on your part.
You could buy a airport express and plug that into the main router by ethernet.. again if allowed. Your TC can do wireless bridge to another apple product very well. Messy but could work. It is not that expensive to get a second hand AEBS and use that. You don't need the latest products but wireless range would be better in the AEBS than AE.
So I'm still wondering: Is there another workaround? Is there a way to get my mac to connect to my time capsule (for backup) and another router (for internet) simultaneously, or is that just technologically impossible? If it's impossible, is there another solution?
You cannot wirelessly connect to two different wireless devices at once on one client. You need to either have a second wireless client in the laptop.. for instance a USB stick which can be fairly tiny nowadays. It is just you need to find one with Mac drivers. Or the TC must have internet connectivity. You could get that by buying a wireless bridge, and using that in your room, with the TC plugged into it. Universal wireless bridge devices are fairly cheap, but can be a pain to setup. Look for products that work with the main router and use as fast a speed as possible. It can be a tricky setup as you need the wireless bridge working on one channel and the TC working on another. What I am suggesting is the WDS solution you found but using two different boxes to do it. And not using WDS at all, unless the main router is suitable, but rather universal bridge.
The hassle of all that suggests to me,, I would go for the wireless stick, so your Mac laptop has two wireless clients.
http://www.ebay.com.au/itm/iMAC-MAC-Apple-Airport-G3-G4-G5-OS-X-USB-WIRELESS-CAR D-/290538112833?pt=LH_DefaultDomain_0&hash=item43a56bc741
I have no idea if this works just to show you what I mean. Please do research it yourself.
An ethernet connection to the TC is far superior solution albeit would require you to plug and unplug it.

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

I purchased a time capsule last year and we have been using for our backup of our apple devices (iMac, laptop, iPad and now 5 iPhones). we have not used it as our router for wifi but would like to now switch to it. need directions for switching please.

i am using time capsule for backup only but would like to switch to it for our wifi. directions on apple discuss original set up of time capsule for wi fi but not switching from existing wi fi router. were can i get help with this?

Well, it depends on what ISP you use.
Reply back with your ISP and connection type (cable, ADSL). Also, do you use an ISP router or do you have a modem connected to a router that you provide?

HT3275 I received this message and I'm unsure how to fix it "Time Machine couldn't complete backup to Time Capsule the backup disk image"/Volumes/The Vision Board/Alex Parry.sparsebundle" is already in use

I received this message and I'm unsure how to fix it "Time Machine couldn't complete backup to Time Capsule the backup disk image“/Volumes/The Vision Board/Alex Parry.sparsebundle” is already in use

Look at the more like this on the right column of the web page.
This is the most common error here.. we answer it 5-10times every day.
Simple method.. pull out the TC power cord .. count to 10.. plug in the TC power cord.
Look at the other references for more info.

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

Can i use time capsule to backup movies and see them wireless without redirecting my itunes library to the time capsule?

can i use time capsule to backup movies and see them wireless without redirecting my itunes library to the time capsule?

It seems the ability to restore from backup discs was removed along with the ability to create them. You will need to temporarily install an older version of iTunes (e.g. 10.3) to recover the media from those discs.
See Win 7 OS,64 Bit..Going back to ver 10.3 as I wish to use the cdbackup/restore version..I for a previous thread discussing this.
tt2

Time capsule is slow and inconsistent

It seems that the wifi is much slower than my old airport extreme, and inconsistent in terms of connectibility and strength. Any hints? I've been at this for two days.

All,
Maybe trying some of these suggestions will help?
*_Slow Time Capsule Transfer Speeds_*
*Initial Backup Best Over Ethernet*
It is recommended that you perform the initial full backup via ethernet, then all subsequent backups via wireless.
*Transmit Power & Wide Channels*
If you are using the 802.11n only (5 GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Select “Airport” in the toolbar.
Click the “Wireless” tab.
Click “Wireless Options...” at the bottom of the window.
Adjust the “Transmit Power” to 100%.
Put a check mark in the box labeled “Use Wide Channels”.
Click “Done”.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network speeds improve.
*Anti-Virus Software*
Are you running anti-virus software. Disable it and see if network speeds improve. The discussion boards are filled with users who are experiencing degraded network speeds due to their anti-virus software.
One poster observed: “I had the exact same problem 5mins ago, it had taken 2 hours to back up 2GB, I realized I installed Sophos anti virus a couple of days ago. When I turned that off my back up is speeding through.”
Another contributor stated, “I am doing the first backup to my time capsule, about 71 Gb, It seems to be going about 1 Gb per hour. is this seem OK? I tried the ethernet connection and the speed was about the same. It has been going all night and after 12 hours it is at only 12 Gb of 71….I found the problem, I uninstalled Norton and the problem went away. It backed up in about 3 or 4 hours”
*Wireless Security Issue*
Some who have experienced degraded network speeds have isolated the problem to their wireless security setup. Try this:
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Select “Airport” in the toolbar.
Click the “Wireless” tab.
Change “Wireless Security” to “None”.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network speeds improve.
Granted, this is far from desirable. But it does help to isolate the problem in you instance. Maybe simply resetting the security with a new password will help?
Let us know if any of these procedures helped.
Cheers!

Setting up Time Capsule for backup only on existing wireless network

I have a wireless network already set up with a NetGear wireless router. Cable plugs into router, router connected via ethernet cable to my Power Mac G5 desktop, plus 2 PC laptops in the house also connect wirelessly to the home network via this router.
I want to set up Time Capsule as an external hard drive to back up all three computers -- I don't necessarily need to use it as a wireless router although i'm not opposed to that if it's easier to do it that way.
When i try to set it up using AirPort utility, i get the amber flashing light. Airport utility is able to discover the device, and then always asks if it's OK to switch networks. I've tried both "switch" and "don't switch"; either way when i try to set it up, AirPort utility stalls out on "Reading Time Capsule Configuration"; eventually giving me the error msg: "Base Station Error: AirPort Utility was unable to find your Apple wireless device."
All i want to do is mount it as an external hard drive so i can use Time Machine for backup, and be able to use it to also back up the PC laptops wirelessly. I need help in the following three areas:
1. How should I be physically connecting my devices if i want to do this? Which cables go in which ports? There is only one ethernet port on the back of my G5. The G5 can connect to the router either wirelessly OR via ethernet cable. I've tried G5-->Time Capsule-->Router, G5-->Router-->Time Capsule, Router-->G5 PLUS Router-->Time Capsule, and I've tried every variation on the regular ethernet and WAN ports. What's the right way to do this.
2. If i'm not setting up the TC as a Wireless Router, is AirPort utility even the right tool for setting it up? it seems to be confused by the two wireless networks and won't let me get past that point. Am I supposed to click "Switch" when it asks me to switch networks? Is there a way to just mount it as an external drive and bypass the AirPort utility setup entirely?
3. Once i get it set up so it's visible as an external drive and usable for Time Machine backup, how do i then make it available to the other PCs on the network so they can back up to it also?
Thanks for your help.

sarah,
You already have an existing wireless network.
You do not need to plug the Time Capsule into anything except power.
Set the Time Capsule to "Join an existing wireless network"...
That is all you need to do.
Then all the computers should see the Time Capsule.
If you can't see "Join an existing wireless network" in the choices, hold down on the option key and then click on the choices.
Give that a try.

Time Capsule: WI-FI and Ethernet at the same time

Hi everybody,
I've connected my mac book (Lion) to a 2T time capsule via wifi and it works fine. The TC is connected via wifi to an existing network (and internet connection).
Unfortunately, using this configuration, ethernet connection between the macbook and the TC (to speed up file copying) doesn't work: it just keeps connecting via wifi.
I've also tried to switch of the wifi connection on the macbook to "force" the use of the ethernet cable but it doesn't work.
Is there any way to use the wifi connection but, when needed, just connect the macbook via ethernet without changing the TC configuration?
Thanks in advance
M

When you configure the TC to "join a wireless network" as you have likely done, it performs no routing functions in this type of setup.....and the Ethernet ports are not enabled.
In effect, the TC becomes a wireless hard drive when it "joins" a wireless network.
You would need to consider whether you want to reconfigure your TC in a a diffferent way......(connecting it to your main wireless router using a wired Ethernet cable)......if you want to have Ethernet capability on the TC.

How to divide time capsule for Mac and PC back up

Want to know if a cant use my time capsule to do back up for my MacBook and do manual back up for the PC of my wife

How to divide time capsule for Mac and PC back up
It is not possible to divide or "partition" the Time Capsule disk......unless you pull the hard drive from the Time Capsule (which voids the warranty), place it in a separate enclosure or caddy, connect the enclosure directly to your Mac, and use Disk Utility to partition the disk. Then, you must reinstall the disk back in the Time Capsule.
This is a lot of work....best done by an experienced technician. The operation will likely cost more than the cost of the Time Capsule.
Life would be tons easier if you used the Time Capsule with your MacBook and added a separate USB drive to the PC.
If you do not need to divide or partition the Time Capsule storage space, and you are willing to have the Mac and PC share the same space, take a look at an application like Macrium Reflect to backup the PC to the Time Capsule disk.
Still, having done this in the past, things would be much faster and easier for you if you use a separate USB drive for the PC.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

Mackeeper has detected a virus in the time capsule back up - it is not possible to dele - it ite the file. Do I find time capsule in finder and delete the whole computer back up, then crate a fresh back up? Is that the only solution please?

mackeeper has detected a virus in the time capsule backup, it is not possible to delete the infected file. Do I mount time capsule in finder and then consign to junk the whole computer backup then create a fresh backup? Is that the only solution please.

Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components. Never install such junk on a Mac.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.
May I suggest that you review the following setting in System Preferences?
Although you may easily override that setting, it will serve to protect you from inadvertently installing garbage. The overwhelming majority of Macs I come across have the MacKeeper installer file already present in their Downloads folder, often multiple copies of it. The downloaded file itself can do nothing until it is opened and installed, and the above setting (known as Gatekeeper - not to be confused with MacKeeper) will prevent that from occurring.

Time Capsule duplicating backups and becoming full

Similar Messages

Maybe you are looking for