Time Capsule e Samsung serie 9000 con modem alice

Salve, ho acquistato una TC da 2 Tb, l'ho collegata in modalità bridge al mio modem alice, adesso vorrei che il mio televisore Samsung serie 9000 la leggesse per poter vedere video, foto, etc su di essa. Come fare?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

Similar Messages

  • Time Capsule won't connect to Arris Modem?

    I'm trying to connect my Time Capsule to an Arris Touchstone Telephony Modem. The modem works with my gf's Belkin router, and I can plug directly into the modem and get Internet access, but my Time Capsule will not work with the modem. The green light comes on, the signal is broadcast, all wireless devices in the house connect to the signal, but nothing connects to the Internet. I've tried the turn the modem off (and take out the battery) trick a dozen times with no luck. Any ideas on what to try next? The two just don't like each other.

    Leave the modem off overnight.. with the cable disconnected. But you often need the modem off at least 15min for the dhcp at the ISP to reset. Try for increasingly long times..
    You can also ring the ISP and ask them to reset the port because you have changed the router.. they should be prepared to help... Make sure the TC is the only thing connected.
    I am presuming the Arris is only a modem without a router in it.
    There are other tricks we use to get this working but the TC has such a limited setup presented to the end user there is nothing else you can do.
    Just make sure the TC is set to dhcp on the ethernet WAN setup.. and has the connectivity leds come on when you plug it in.
    Otherwise bridge the TC and use it plugged into the belkin.

  • I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

    I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.  Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

    I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
    Excellent plan.
    Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
    Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
    This Apple support document will show you how to hookup and configure the second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Airport Time Capsule 3TB can't connect to modem via ethernet

    Hi all,
    Thanks in advance for any assistance on this issue ...
    I am having extreme difficulty in connecting my Airport TC to my modem via ethernet.  Ideally, I want to use it to extend the range of my wifi, as well as back up my machines.
    I can't get the AP TC to add on to an existing network in initial set up as , even though the option is available, the Airport Utility (6.3.2) doesn't seem to keep it selected, and wants to create a new network.
    When I create the new network, my internet connection drops out, even though the modem indicates that it is connected.  I then edit the internet connection in AU by telling it to extend the existing network (add in the SSID etc) which picks up the internet connection again, but then the Airport TC drops out, and all I get is a blinking amber light and a message saying no configured Airport Base Stations detected, continuing to search.
    I have no doubt that it is something I am or am not doing.  I have soft, hard and Factory reset the TC, reset the modem, changed cables, pretty much everything my tiny brain can think of.
    I have looked through the support pages and follwed thier advice, with no luck.
    Help please.

    I  can't get the AP TC to add on to an existing network in initial set up as , even though the option is available, the Airport Utility (6.3.2) doesn't seem to keep it selected, and wants to create a new network.
    "Add" would be used for a wireless connection....and you indicate that you are using Ethernet to connect the existing modem/router and Time Capsule together....so the correct setup would be to create a new network using the exact same wireless network name and password as your existing network.
    Connect an Ethernet cable from one of the LAN <--> ports on the current modem/router to the WAN "O" port on the Time Capsule.
    Here, I am assuming that the TC will be located at least a room or two away from your main wireless router. If it is located any closer, there will likely be wireless interference issues between the two routers. The wired connection between the modem/router and Time Capsule must be maintained.
    AirPort Utility will suggest a setup that looks somewhat like this.....except you will see a Time Capsule instead of an AirPort Express as illustrated below:
    Network Name would be the name of your existing wireless networik
    Base Station Name is a device name that you want to call your Time Capsule
    Password is the wireless password of your existing wireless network
    Verify confirms that password
    Click Next and the setup utility will auto configure things for you in a minute or two
    When you see the message indicating Setup Complete, click Done and you should have a green light on the TC.

  • Airport extreme time capsule yellow light - no Internet - cable modem does work

    Is their a reset button on the time capsule or am I out of luck.
    Yes I have turned on and off etc. the cable modem has been tested and is functioning ... Do jthese units go bad.
    Thanks friends

    Airport Extreme
    or
    Time Capsule
    These are two different devices?
    You have a yellow light on both of them?
    However, yes, you can reset either one of them.
    A yellow light could mean there is just an update for each one of them.
    But if yours isn't working there is another problem.
    See this Apple doc about the blinking yellow light:
    http://support.apple.com/kb/TS1589

  • Time capsules and samsung blue ray player

    i am trying to connect my samsung c6500 to time capsule and it reference some gateway ping issues.  any clues what to do?

    Are you trying to connect with wireless or ethernet?
    Does the TC have a windows compatible setup.. ?
    this means using names for everything in the TC that comply to windows network standards..
    Short.. 2-20 characters
    No spaces
    Pure alphanumeric.
    For everything that the Samsung is going to see. But it is better to apply it to everything.
    It can be a help to set windows workgroup as well but you won't see such thing unless you use the 5.6 or earlier utility.

  • Trying to "See" time capsule on samsung tablet. Can it be done?

    Trying to see our time capsule from a samsung tablet, can it be done?

    What does "see" mean?
    You can connect to internet.. that should be no problem.. but set wireless correctly.. using correct windows type names, not APPLE NAMES.. with spaces and illegal characters like apostrophe.
    Use wpa2 personal security..
    If you mean hard disk access.. that depends.. can galaxy tablet open a network drive..
    Set the hard disk to windows name.. ie no spaces..
    in file sharing, turn on the guest account to read and write access.
    Put the correct workgroup into the TC.. generally WORKGROUP.

  • Time Capsule with TP LINK MR3420 3G Modem

    I am considering buying a IMAC and Time Capsule (TC), one of the reasons would be single vendor backup via Time Machine.
    However my present network has a TP Link MR 3420 Router (TP), that handles a modem connection to a 3G Mobile Braodband Dongle.
    I wish to keep this.
    I have seen alot of discussion about connecting the TC in Bridge Mode, and still allow the TP to handle Network DHCP etc. Whilst this may work, a £249 TC relies on a £ 33 router ?
    I have read about putting the TP into DMZ mode, swich off DHCP and foreward the traffic to a DMZ host IP Address.
    How can this be configured in reallity, the present TP settings are
    Lan IP 192.168.1.1 Mask 255.255.255.000
    DHCP 192.168.1.101 to 192.168.1.999 default gateway 192.168.1.1
    What are the principal Lan IP address for each device,?? do they both share a common lan address system, or each has a different Lan IP address system.
    I would appreciate all help, advice and experiance
    John Pierce

    You basically cannot have two routers in the network.
    Nor can you bridge the 3G router and still pass the IP to the TC.. as indeed most 3G do not allow that kind of setup.
    You need the TC to have extensions to plug 3G wireless USB modem .. we will wait until doomsday before that happens.
    Since you have to be dependent on a £ 30 router to control my home network so be it..
    The actually ability of the router is not necessarily a big issue. The router in the TC is actually nothing particularly wonderful and the TP-Link will have a lot more ability.
    Unless you run into some major issue I would just stick with the TC in bridge.
    You can double NAT.. use DMZ as you suggest.
    The problem here is that you are still totally dependent on the TP-Link NAT.. and you have added a second NAT to make it worse.
    It is possible to setup the TC in a transparent mode where it is functional as dhcp but not double NAT.. this of course does make the TC appear as if it is the main router.. but it is appearence only.. the TP-Link is still the main router.
    See https://discussions.apple.com/message/22695632?ac_cid=tw123456#22695632
    For this method which is designed to avoid the DNS of the TP-Link more than what you are trying to achieve but the effect might do what you want.. Do not use DMZ.. or if you do, use the end computer IP which should be accessible to the TP link as the TC is not actually forwarding. 

  • Connect Time Capsule with Samsung LED TV via LAN - will it work?

    Hi. I am from Germany and my englisch is very bad. Sorry for that.
    I want to by a Time Capsual and a Samsung LED TV with LAN integrated.
    I want to connect the Time Capsual via LAN to the TV to watch Movies, listen Musik and watch Pictures. I have not found any informations, if that will work.
    I hope you understand my question and somebody can help me. Thanks

    narfist wrote:
    Hi. I am from Germany and my englisch is very bad. Sorry for that.
    hi narfist and welcome to the discussion area !
    I want to connect the Time Capsual via LAN to the TV to watch Movies, listen Musik and watch Pictures. I have not found any informations, if that will work.
    it will not !
    consider getting an Apple TV. you can store content locally on the ATV or you can keep your iTunes media folder on the time capsule but would need iTunes to be running on your Mac to stream content to the TV (via Apple TV).
    good computing

  • Time Capsule + 2Wire 1701 HG Gateway DSL Modem/Router

    I'm posting this note in that hopes that maybe some lost soul will stumble across it and take heart. Some things do indeed "Just Work," but it might take 10 or 15 person-hours to reach that state.
    This was Trouble with a capital T.
    It took me about a week, the ISP tech support people a couple of hours in two phone sessions, and finally Apple Support about a half hour to get it running.
    The first two times I tried to set it up (even though I'm kind of an RTFM kind of guy) the Time Capsule and I managed to completely bring down my network and to disable the modem all the way to hard reset.
    The third time, I got Apple Support to talk me through it, and now it's happily munching away, backing up my main drive.
    The root problem, according to Apple support, was that the 2wire is a combined modem/router, so that, unless the guy at the keyboard pays very close attention to the step descriptions and understands all the subtleties, he can get both 2wire and TC trying to assign addresses on the network and really screw things up.
    The Apple-phone-support-prescribed sequence that ultimately worked was shutting down everything attached to the modem then restarting in order, modem, TC, finally MacBook. During the re-setup process the 2wire website somehow detected the need for a modem firmware upgrade and offered to download and install it.
    Finally the TC's green light came on, and everything seems to be working to spec.
    Now I'm a happy guy, but there's no possible way I could have gotten that out of a manual, and if it hadn't been for Apple's willingness to provide human phone support, the TC would have been on it's way to the dump. Well ok, I would have waited 'til the next E-waste day. Apple support gets point for running a down home blues on their 'hold' track.
    Hope this helps someone,
    rj

    This 2Wire modem/router has been nothing short of a pain in my nether region.
    Is it possible to disable the 2Wire's router capabilities and use only the Time Capsule's router capabilities?
    I'm going to give your suggestions a shot. Keeping my fingers crossed.

  • Is the new AirPort Time Capsule compatible with a fibre optic modem?

    I will be having fibre optic set up in my new home.  The new AirPort Time Capsule states that it si able to connect to cable or DLS modem for internet access.  Will I be able to connect this device to a modem designed for fibre optic internet?
    Many thanks
    CS

    Yes. All it needs is a modem (cable, fiber, satellite, DSL) with an Ethernet output (not USB).

  • I want to hard line time capsule to imac so uverse router, modem, and wireless is the primary connection?

    i want to hard wire time capsule to imac, so att uverse's modem, router, and wireless is the primary connection. i don't think the competing wireless features will play nice together.

    If your goal is to provide Internet access to the iMac via an Ethernet connection to the TC ... and, in turn, have the TC connected by wireless to the Uverse gateway, then as you have already guessed, this combination won't work as the two routers are not WDS compatible. Your only option with this set of networking gear would be to connect the TC to the Uverse gateway by Ethernet.

  • Can time capsule connect to Huawei E398 4g modem

    Can I connect a LTE 900 Mhz, Huawi E398 modem (4G) to my Time Capsule?

    Sorry, but no.
    The Time Capsule needs an Ethernet connection, which the Huawei does not provide...according to their specifications.

  • TS1317 Time Capsule won't connect with Motorola modem

    Using a Motorola Cable modem, that's known to be good Time capsule shows no Internet connection, put Linksys wireless router back in the system, then use Ethernet cable out of Linksys router to Time capsule everything woks ok ???? I'm totally without any ideas as to why.

    Leave the modem off overnight.. with the cable disconnected. But you often need the modem off at least 15min for the dhcp at the ISP to reset. Try for increasingly long times..
    You can also ring the ISP and ask them to reset the port because you have changed the router.. they should be prepared to help... Make sure the TC is the only thing connected.
    I am presuming the Arris is only a modem without a router in it.
    There are other tricks we use to get this working but the TC has such a limited setup presented to the end user there is nothing else you can do.
    Just make sure the TC is set to dhcp on the ethernet WAN setup.. and has the connectivity leds come on when you plug it in.
    Otherwise bridge the TC and use it plugged into the belkin.

  • Do I need to reconfigure my Time Capsule when I get a new modem?

    I have recently upgraded to AT&T Uverse internet; since then I have had experienced frequent slow speeds from my Time Capsule router.  I have disconnected the router built into the AT&T modem, and AT&T has come out several times to ensure that the issue is not with the phone line nor the modem itself--when we connect the modem to the computer via and Ethernet cable, everthing works fine.
    My question is, is there some sort of reconfiguration process I need to go through to make the Time Capsule router work faster with the AT&T Uverse modem?

    No problem.
    You can factory reset from the airport utility. Just select the TC in the airport utility.. it must be highlighted to work.. go to the top menu area and use Restore Default Settings.
    Or do it manually.. I prefer this method.
    The Factory Reset TC Gen1-4. Or AE Gen1-5
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec.
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset TC Gen 5 or AE Gen 6
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort AE or TC still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AE/TC .. hold in reset and power the TC/AE back on.. without releasing the reset.. wait until status led flashes rapidly.

Maybe you are looking for