Time Capsule Error Code 6753 - Cannot Configure

I recently purchased a 2TB Time Capsule. The setup went fine, I didn't do anything radical, just let it start a network. The network wifi and ethernet both work fine, time machine backups work fine. Everything works fine.
The problem is that I cannot access the TC's configuration in Airport Utility now, unless I reset the TC. After a reset I can configure it, and then next time I try it cannot be read again (error code 6753).
Airport Utility can see the TC just fine, but clicking 'continue' or 'manual setup' results only in it sitting there for a while trying to read the device, and then saying there was an error.
Does anyone have any advice?

Are you connecting to the TC from your computer using an ethernet connection?
If not, connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule and try it again.
If you continue to have difficulties, you may need to do a Factory
Default Reset.
Power off the TC for 5-10 minutes
Hold in the reset button and keep holding it while you plug the power back in to the TC
Keep holding the reset button until you see the amber light begin to flash more quickly.
Then try to reconfigure the TC, again using the ethernet connection. Please post back on your results.
Message was edited by: Bob Timmons

Similar Messages

Time Capsule Error Code 6584

What is Time Capsule Error Code 6584? What is the corrective action to clear it?

On the More Like This.. see the various very common complaints.. just to the right >>>
First one is good.. anything Pondini responds to listen. https://discussions.apple.com/message/17748380#17748380
A simple reboot of the whole network.. from off.. modem .. router/TC.. clients.. 2min gap will probably fix it.
If it keeps happening, tell us your OS. (Most likely Mountain Lion.. which has networking ability of wet string and a pair of tin cans).

Why does my time capsule error code -6584

time capsule error code -6584

There are a few causes..
Using the More Like This..
the top reference is helpful.. but you can see this is a regular problem.
https://discussions.apple.com/message/17748380#17748380
Basically reboot the whole network.. restart in correct order.. modem.. router/TC...Clients.. 2min gap
Half the time will fix it.
It can also be the backup is corrupt and needs repair.
Are you aware of the supplement to 10.7.5 to fix TM??
This is not related to your problem,, rather it is slow backups.
http://support.apple.com/kb/DL1599

Apple Airport Express Error Code -6753

HI,
I have just bought my third Airport Express. I have 2 already set up in different rooms and wanted a third for yet another room.
I have a wireless network that I want it to join along with the others.
I cannot connnect to it to configure it. Here are all the ways I have tried.
1. From a Vista laptop using the Utility that came on the disk. The device appears in teh list with the amber dot next to it, but when I try to connect to it I get a pop up that says it will connect to it, and disconnect from my existing network, which is fine. But nothing happens. So no joy.
2. Tried the same from my XP desktop PC that also has a wireless adapter. Still no joy. It detects the new wireless network but cannot connect to it.
3. From my Mac Mini. No joy whatsoever - doesnt even detect the new network created by it.
4. Coonected an ethernet cable, looked up the ip address, then tried to connect to it directly using "Other" on the XP PC. This time it asks for the password, which I enter "public" - then I just get an error code -6753.
Any ideas?

If at all possible, switch your encryption to WPA ... it just works better than WEP. If you have XP, you might need a hotfix from Microsoft.
1 Open up your router software: choose WPA PSK.
2 Type in passphrase, copy the key that is generated.
3 If your router gives you an option for AES or TKIP, choose one or the other (or mixed, if you have that).
Do not save yet. Keep the router page open on your desktop.
4 Open up your Airport Express Utility.
5 Enter the new key (not the passphrase) into the Airport Express.
6 Save this.
7 If you have any other devices on your network that require the key, open them and change the key.
8 Now, return to the router/access point page that is open on your desktop.
9 Save.
9 Your wireless network card also has to be changed in order to reflect this.
10 Open up the NIC by right-clicking on the icon in the bottom right-hand corner of your desktop. In Vista, you can also access this through Network->Network Sharing ->Status -> Wireless Properties -> Security. Add your security type, (TKIP or AES) and your key.
11 Turn off your computer.
12 Turn your computer back on.
Also, unplug AE, unplug router, and unplug modem. Plug in modem, plug in router, and plug in AE.

Error code: 2147778144 Cannot find the QE property.

I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

I found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary

I am trying to update PR and PS and get error code A12E3. cannot find solution.

I am trying to update PR and PS and get error code A12E3. cannot find solution.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I keep getting a Time Capsule Error, how do I resolve?

I keep getting a Time Capsule Error, how do I resolve?

Start with #C3 in Time Machine guru Pondini's excellent support document......Time Machine -- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following: The backup

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

I cannot download ADOBE Flash. The error message is FAILED from Firefox. The other error message is "CANNOT CONFIGURE APPLICATION." Any suggestions?

ADOBE 12.exe downloaded. FLASH will download but won't install. The error message is "CANNOT CONFIGURE
APPLICATION."

You can try to run the Flash installer as Administrator.
Latest Flash player versions here:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Time capsule error 111

hey
im having a problem with my time capsule error 111
worked fine until last week and i heard it was an error with lion which i upgraded 6 months ago and worked fine until last week.
I've tried some of the things said on these discussion boards but until now nothing....any other suggestions??
thanks in advance

I bought MacBook air last June 2011 with snow leopard os, then bought 3rd Gen time capsule 2tb. Tried to use it as backup but error 109 appeared. Then, I tried all tips in the net but nothing happened. I upgraded to lion os, tried to reinstall and back up again but error 111 appeared. Now my time capsule is just a router and one big paper weight. This apple product is an epic fail. It's really frustrating.

I keep getting an error code 6753 trying to set up airport express

I've been trying to install the airport express with no success. I restarted, pressed the reset button and it's back to factory settings. When i try to do anything it generates an error code 6753. Any thoughts?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

Time Capsule Error: Unable to complete backup...

For the past two days I've been getting the following Time Capsule Error message whenever it attempts to back up my system, "Unable to complete backup. An error occurred while creating the backup directory." I can't get any more information about the error than that. If I reset my TC, will it lose all of my previous backups? Restarting my Mac didn't help. All other functions are fine, i.e. WiFi is good and I can still print to my printer hooked up to it. Any ideas?

I'm having the exact same problem. If a b/u does kick off, it shuts down the Mac. I get the darkened screen with the window that says a reset is required.
Anyone know how to fix this?

Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc?

My Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc? Please help

Hi there,
Thanks for the reply.
I plugged my usb hard drive in and what looked like time capsule started automatically on my mac. The same hard drive worked perfectly on my laptop pc before, now it connects but isn't visible in my computer.
My second hard drive works perfectly well on both my pc and mac, so I am not sure what has happened to the one in question.
Regards,
Stephen

Error parsing enveloped data (Error Code: 101): Cannot decrypt request

When my player requests http://<server>:8080/flashaccessserver/<tenant>/flashaccess/license/v1 the following happens:
- HTTP 500 is returned
- in the log file, an ERROR is appended, copied below:
[#:10] 2011-01-14 12:19:37,381 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
[#:10] 2011-01-14 12:19:37,385 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ]
Error occurred processing license acquisition request
com.adobe.flashaccess.sdk.protocol.HandlerParsingException: com.adobe.flashaccess.core.pkcs7.PKCS7Exception: Error parsing enveloped data (Error Code: 101):
Cannot decrypt request
        at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:73)
        at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
        at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
        at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
        at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
        etc...
The Validator says that the config is ok, but I can't get this /license/v1 url to work.
Can you help?
Thank you!

I have managed to get past that 101 error, but now there is another error... and I have no idea where to continue... can you help?
Thank you in advance!
This is my log file:
[#:3] 2011-01-14 16:38:53,623 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/, file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/flashaccess-licen se-server-ext-sample.jar]'
[#:3] 2011-01-14 16:38:53,626 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
[#:3] 2011-01-14 16:40:26,933 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Error occurred processing license acquisition request
java.lang.UnsatisfiedLinkError: com.rsa.Native.JN_SHA1.NativeDigestInit([B)[B
        at com.rsa.Native.JN_SHA1.NativeDigestInit(Native Method)
        at com.rsa.cryptoj.n.fN.a(Unknown Source)
        at com.rsa.cryptoj.n.qE.a(Unknown Source)
        at com.rsa.cryptoj.n.qE.f(Unknown Source)
        at com.rsa.cryptoj.n.bA.a(Unknown Source)
        at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
        at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
        at com.adobe.flashaccess.core.crypto.jsafe.RSASigVerifier_JSAFE.<init>(RSASigVerifier_JSAFE. java:46)
        at com.adobe.flashaccess.core.crypto.RSASigVerifier.getInstance(RSASigVerifier.java:30)
        at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:82)
        at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:164)
        at com.adobe.flashaccess.core.pkcs7.SignedData.verifySignature(SignedData.java:335)
        at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.parseMetadata(V2Conten tMetadataImpl.java:189)
        at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.<init>(V2ContentMetada taImpl.java:155)
        at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.parseLicenseMessage(Lice nseRequestMessage.java:565)
        at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.<init>(LicenseRequestMes sage.java:137)
        at com.adobe.flashaccess.sdk.protocol.license.LicenseHandler.parseRequestMessages(LicenseHan dler.java:128)
        at com.adobe.flashaccess.sdk.protocol.AbstractBatchHandler.parseRequestMessage(AbstractBatch Handler.java:124)
        at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:75)
        at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
        at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
        at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
        at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
        etc.

Time Capsule Error Code 6753 - Cannot Configure

Similar Messages

Maybe you are looking for