Time capsule for moving files from PC to MAC?

Hello,
Any know if I can use the time capsule to move all my files from my PC to Mac?

I don't see a response to your last question, so I will chime in, as I have the same issue. I just bought a Macbook and have an old PC. I would like to use my Time Capsule to back up my PC and then transfer these files to my Mac. I read another post that said I should be able to do this by going through my PC "My Network Files" then adding my TC's address. However, when I do this is pops up my e-mail address and asks for a password. I put in the one associated with that particular e-mail address, but it won't accept it. When I tried the one I use for my Mac it then says the folder I am trying to access if not available. Any thoughts on how to proceed?

Similar Messages

  • HT4889 moving files from pc to mac book

    Hi have down loaded to set up moving files from pc to mac book pro but keep getting an error message on pc  saying error occurred whilst  preparing your info for transfer ! i am running visa on pc any help pls thanks

    Look at these links.
    *How to use your iPod to move your music to a new computer*
    http://docs.info.apple.com/article.html?artnum=300173
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
     Cheers, Tom

  • Moving files from outlook to mac

    I'm switching from a PC to Mac.  How do I move or export email files from outlook to mac.  My email account is IMAP at Gmail.

    Hi Ed,
    If you're using IMAP there's no "export" necessary as all of the emails are stored on the GMail mail servers and just made available to you locally. Now, if you've opted to create local (offline) folders for archiving purposes that's different.
    Regrettably there's no easy to way to move from Outlook into Mail, for free. There's a program you can buy called Outlook2Mac.
    Link -> http://www.littlemachines.com/
    For $13 it's a great program. There are some work arounds but it involves using Thunderbird.
    Link -> http://guides.macrumors.com/Moving_Email_from_PC_Outlook_to_Apple_Mail

  • How can I use my time capsule to save files from my windows PC (Windows 8.1)?

    I have been to see the iStore close to where I live but I am frustrated to say that they are no help what so ever. The technical desk there freely admits that they do not how to do it and all they say is "apparently it is easy. Just follow the instructions on screen" which helps me no end!
    I have the Time Capsule set up on my mac and want to use part of the disc to save my files from my Windows PC (running Windows 8.1) that is on the same home network.
    I have found the apple forums so helpful in the past that I am pinning on my hopes on anyone that can help me via the forum now!

    Load the airport utility for windows. Sadly the most recent one is old.
    http://support.apple.com/kb/dl1547
    Although it is for windows 7 it does work on 8 and 8.1 .. tell us if you have problems loading it. Some people find it won't work without using safe mode.
    The utility will not help a lot to setup the latest model TC.. it is fine for Gen4 and earlier. But it does load bonjour for windows and a disk access agent.
    The TC should run simple names.. Short.. keep them below 10 characters if you can. No spaces and pure alphanumeric.
    That includes the base station name and wireless name.
    Once all of that is correct, open windows explorer and type in the address bar.
    \\TCname or \\TCipaddress where you replace TCname with the new short name or TCipaddress with obviously its actual IP.
    You will then get a request for username and password. Username is whatever.. admin will do. Password type in your disk access password.. public by default.
    TC is not designed to allow partitions so you cannot partition the TC disk. Create a folder and simply copy and paste your files to the folder.
    NOTE:: The TC cannot back itself up. So make sure you do not move files to the TC without having another copy.
    NOTE:: The TC does not happily mix TM backups and data.
    See http://pondini.org/TM/Home.html For info about TM and the TC.
    This area in particular.
    Q3 http://pondini.org/TM/Time_Capsule.html
    On mixing data and backups.

  • Moving files from windows to mac

    Hi All,
    Some time soon my son is going to buy a Mac Pro or if they come out w/ a new model I will buy a new one and give him this one which is not too old. He now uses a windows XP pc. the question I have is how do I / he transfer his files from the pc to the mac pro
    Thanks
    Mike

    Apple - Support - Switch 101

  • Folder settings when moving files from pc to mac

    Hi all. I have a embarassingly simple question, but I just haven't been able to figure it out on my own or find the answer under the search function. I recently got my first mac (a macbook pro, osx lion), and I've just gotten around to transferring some of my old pc files to the new macbook.
    I had thought all I had to do was to drag and drop the files onto an external hard drive and then drag onto the desktop of the macbook (for example, the My Documents folder, etc.), and that's exactly what I did.
    Here's my issue: when I open the "My Documents" on the desktop, the window is completely empty (Get Info shows that I am supposedly able to read&write). However, when I go to Finder > All My Files, I do see files from my pc, and the extension bar says that they are located in Desktop > My Documents.
    So what gives? Is there a view/preference setting I haven't quite figured out yet? For organizational purposes, I would prefer not to sort through the files from my pc in the All My Files window.

    http://forums.parallels.com/
    And maybe some tips or troubleshooting tutorials on dealing with XP and Windows.
    I thought Parallels now included Acronis or something? maybe Paragon.
    Even Fusion, which can import a Parallels installation might be worth talking to and looking into.
    http://communities.vmware.com/community/vmtn/desktop/fusion

  • Moving files from pc to mac - directory structure gets all messed up - help

    Hi, I just got my new Mac Book Pro (mid-2009) and I am having trouble bringing over my 70gb of data from my old pc. I am using VM Fusion and have also downloaded NTFS-3G. I cloned my PC HD onto an external USB HD (formatted with NTFS) and have plugged it into the Mac. I can mount the drive, read and write files from the drive, but when trying to copy files, it would start, but would not finish the job (threw an error after 50mb saying something about trouble copying a file and then froze). I called apple and they said try to do the copying through Fusion. I have one large Mac partition, no Windows partitions on my Mac drive and am running Fusion with XP Pro. I tested the copy function in Windows from my external HD to the "documents" directory in my Mac directory under my user node and small directories (.1 - 2gb) copied fine. But when I tried to copy a 20gb node, it started putting subfolders in random places within the tree structure under the root node I was copying. With 92,000 files, its hard to go re-sort the sub-folders into the right places. Why is it doing this and is there a better way? I'm leaving for 2 wk trip tomorrow and don't want to have to lug my PC with me. Anybody have any ideas? Thanks very much. Larry

    You are not in a MacBook forum.
    And I would use Boot Camp to set aside a Windows partition and install Windows natively.
    Fusion can run Windows on the Boot Camp partition just fine.
    MacFuse + 3G? or there is Paragon NTFS 7 for Mac OS X. Sometimes free is fine, sometimes commercial product. And Snow Leopard may have ability to read HFS+ from Windows (like MacDrive7/8 only that can write to HFS+ also).
    Corrupt directory?
    Bad filenames?
    Filenames that are valid for Mac Extended may not be valid on NTFS, but haven't heard of the reverse being a problem.

  • Moving files from PC to MAC using iPod

    So, I followed all the directions that I found on Apple's site about moving my files from my old PC to MAC. When I go to my MAC so I can pull over the files that I have on my iPod, I must be missing something because its not doing what it should be. I should be able to find on the iPod where are the files I put on it are stored but I'm not...help!

    Look at these links.
    *How to use your iPod to move your music to a new computer*
    http://docs.info.apple.com/article.html?artnum=300173
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
     Cheers, Tom

  • Can i use 2 time capsule for the back of the same Mac computer, for improve the security of the data store

    I will save my data in 2 time capsule at the same time for improve data security

    Mountain Lion added this ability.. it doesn't do two backups at the same time but each time it backs up it uses the alternative location.
    Under Lion you can manually set it to use a different target.. this isn't difficult but you must do it.

  • Moving files from PC to Mac System

    I want to move all my old PC files stored on my NAS to my new MAC system. How do I make those files readable to the MAC? Do I need to reformat the NAS?

    llangstom,
    I am curious.... have you already tried?  or is this more of a theoretical question?  I would be surprised if your macintosh was unable to see the files on the NAS.  I would be less surprised if you needed some software to open the file.  IF the files are word files and Excel files then you should be able to use programs from the iWork suite to open and view the files (or any of the free office suites like LibreOffice).
    If you have pther kinds of files it would be helpful to know what they are.
    All the best...
    Wayne

  • Moving files from PC to Mac

    how do you move files from a pc to a mac ( my documents , my pictures, I tunes)

    I think I understand. *My Documents* is on your Windows desktop isn't it? That's actually a shortcut to the real *My Documents* folder so you aren't actually copying a folder of documents, you are copying a file that the Mac doesn't understand. Double click on your *My Documents* folder so that the actual folder is opened and then copy those folders inside it to the Mac.
    You can tell the difference between a shortcut and a real folder or file because a shortcut has a badge in the bottom corner to denote that it is a shortcut. Note: the Mac OS has a similar feature called an alias that performs a similar task of pointing to where the actual file is located.

  • Moving Files From PC to Mac When Parallels Crashes?

    My Parallels has crashed and won't open. It's stuck at the "press ctrlaltdelete to unlock this machine" Whatever. I'm ready to cash out.
    *How do I get my files back from Windows to Mac?* The Finder couldn't find any My Documents or My Pictures folders. I don't know where they are?

    http://forums.parallels.com/
    And maybe some tips or troubleshooting tutorials on dealing with XP and Windows.
    I thought Parallels now included Acronis or something? maybe Paragon.
    Even Fusion, which can import a Parallels installation might be worth talking to and looking into.
    http://communities.vmware.com/community/vmtn/desktop/fusion

  • Moving files from PC to MAC - what goes wrong?

    And how can i get access to these files? Had to return my laptop at work (PC) and backed everything up to my external HD...brought it home, plug it in to my MAC, and all the important documents will not open. Some word documents that were in zip files seem ok...can these files that won't open be repaired? I tried the NEO program, same thing, they ask what to convert them to.
    PLEASE GUYS, throw me some clues!
    Could it be because the drive is in a win format? But, some other type files do work!

    Does the drive mount when plugged into another PC?
    How is the drive formatted? FAT32 or NTFS?
    FAT32 is the most compatible PC format (it can be read and written to). However, it is an older format for devices. NTFS is the newer preferred format for big hard drives on Windows. The caveat is that other systems (OS X or Linux) can generally only read from these drives. In my experience, devices formatted with NTFS are also more troublesome if there is any sort of error in the filesystem that has not been corrected.
    Your best bet is to format the drive as FAT32 in Windows and recopy the files again to the hard drive. It should mount with no problems when plugged into your Mac.

  • Moving files from a Power mac 7600

    Hi,
    My friend's Dad has 2 Macs, a power mac 7600 and a iMac.
    He would like to get a bunch of files off a power macintosh 7600 on to an external hard drive, to be accessed on the imac. Is this possible and what external hard drive would you recommend?
    Thanks for any insights!
    cheers!
    davej

    Whew, this isn't going to be easy at all of the 4 ways I can think of due to the ports involved on both ends!
    1. Compressing them & eMailing them if the 7600 connects to the Internet.
    2. Ethernet & File Sharing, not easy to connect the 2 but possible.
    OSX.4.x lost the file transfer ability of Appletalk... 10.1.5 thru 10.3.9 had it!
    http://docs.info.apple.com/article.html?artnum=301183
    With OS9 set with Appletalk to using TCP/IP, and or Chooser>AppleShare+IP, you can connect to the 10.4.8 machine.
    Another solution is OpenDoor's $39 Shareway IP, (some OS7, 8, 9 releases had a limited version included)...
    http://www.opendoor.com/shareway/
    Which makes OS9 Tiger compatable.
    "Mac OS X 10.4 and later don't support Personal File Sharing (or other AFP) over Appletalk, though by initiating the connection from the opposite direction you could still achieve an IP connection from a Mac OS 8 computer to a sharing Mac OS X computer. The Network preference pane in Mac OS X 10.4 and later still offers the AppleTalk checkbox, but it is for browsing AppleTalk-advertised resources and zones. The subsequent connection must be over TCP/IP."
    http://docs.info.apple.com/article.html?artnum=106461
    3. Finding a hard to find SCSI external Drive & an even harder to find  Firewire<->SCSI converter.
    4. Via Floppy Disk & Finding a USB Floppy for the newer on. Can't remember if they had an Internal Floppy on the 7600.

  • I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    I recently moved my Aperture Library file to an external hard drive.  Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

    One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
    Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

Maybe you are looking for