Time Capsule hangs at end of full backup, Disk Utility "not responding"

I'm running a Mid 2011 iMac 27" with OSX 10.8.4 and using a WiFi connected 3TB Time Capsule (4th Gen).
I've noticed that the Time Capsule seems to get stuck at the end of a full back-up (let's say 260 GB of 260 GB) and won't end, even after hours of being left alone.
When I mount the Time Capsule Sparse Disk Image Bundle and then try to run Disk Utility, Disk Utility is shown as "Gathering Information," but the Finder and Activity Monitor list Disk Utility as "not responding."  (No disk information is shown in Disk Utility.) This happens both when I connect via WiFi to the Time Capsule and when I connect directly using an Ethernet cable.  If I don't mount the Sparse Disk Image Bundle, Disk Utility works fine, immediately showing my iMac's Hard Drive, so it only happens when the Time Capsule Sparse Disk Image Bundle is mounted.
1.  Is Disk Utility truly "not responding" or is it just taking forever to load because of the 3TB hard drive?
2.  If it truly isn't responding, what can I do to see if the TC needs to be "repaired"?
3.  What's going on with my TC that it hangs up at the end of a full backup?
Thanks.

thefliss wrote:
I see an occasional deep node traversal, but sounds like that can be normal.
Not normal, exactly, but TM's way of handling a problem.  See below.
Aug 17 21:35:50 Erics-iMac.local fseventsd[48]: event logs in /Volumes/Time Machine Backups 1/.fseventsd out of sync with volume.  destroying old logs. (86990 10 86991)
Aug 17 21:35:50 Erics-iMac.local fseventsd[48]: log dir: /Volumes/Time Machine Backups 1/.fseventsd getting new uuid:
Something went wrong with or on the TM drive (Time Capsule in your case), such as a power failure or abnormal disconnection, where OSX was unable to "close it out" properly, so is unsure if all the changes are in the File System Event Store.  If you're not familiar with the Event Store, see the blue box in How Time Machine works its Magic for details (it's talking about the one on your internal HD, but OSX keeps one on every drive/partition and disk image, including your TC backups.)
Aug 17 21:36:07 Erics-iMac.local com.apple.backupd[1728]: Event store UUIDs don't match for volume: Macintosh HD
That's one of the causes of a deep traversal.  The UUID (Universally Unique IDentifier, the long string of numbers and letters) for the Event Store on your internal HD doesn't match the one in TM's records from the previous backup, so it must do a deep traversal instead, comparing everything on your Mac to the latest (completed) backup.
Aug 17 21:42:09 Erics-iMac.local diskarbitrationd[22]: mds [39]:22019 not responding.
Aug 17 21:42:09 Erics-iMac.local diskarbitrationd[22]: fseventsd [48]:17923 not responding.
Aug 17 21:42:15 Erics-iMac.local fseventsd[48]: disk logger: failed to open output file /Volumes/Time Machine Backups 1/.fseventsd/0000000000362fde (No such file or directory). mount point /Volumes/Time Machine Backups 1/.fseventsd
Trouble talking to a disk.  The first two probably involve the TC, the third one definitely does -- it's trying to create the new Event Store.
Aug 17 21:44:03 Erics-iMac.local com.apple.imfoundation.IMRemoteURLConnectionAgent[1789]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.imcore.imremoteurlconnection  (IMTransferAgent:1786)
Aug 17 21:44:03 --- last message repeated 1 time ---
Aug 17 21:44:03 Erics-iMac.local com.apple.imtransferservices.IMTransferAgent[1786]: [Warning] Remote loader crashed for request: <NSMutableURLRequest http://init-p01md.apple.com/bag>
Aug 17 21:44:03 Erics-iMac.local com.apple.imtransferservices.IMTransferAgent[1786]: [Warning] Bag loading failed! Error (__kIMRemoteURLConnectionErrorDomain:-1): The operation couldn’t be completed. (__kIMRemoteURLConnectionErrorDomain error -1.) (null)
Out of my comfort zone, but sure looks like some sort of connection problem . . . with something.
Aug 17 21:48:08 Erics-iMac.local com.apple.backupd[1728]: Deleted 3 backups containing 299.76 GB total; 300.65 GB now available, 209.78 GB required
TM did (finally) connect, figured out how much sp it needed, and started deleting old backups to make room.  Since it did, actual copying would have started just after that was sent.
Aug 17 22:07:03 Erics-iMac.local com.apple.SecurityServer[15]: Session 100018 created
Aug 17 22:07:06 Erics-iMac.local ScopedBookmarkAgent[1853]: CFURLCreateByResolvingBookmarkData failed with error [Error Domain=NSCocoaErrorDomain Code=4 "The file doesn’t exist."].
Aug 17 22:07:08 --- last message repeated 7 times ---
Aug 17 22:07:08 Erics-iMac.local QuickTime Player[1845]: It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil.  This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be logged only once.  This may break in the future.
Aug 17 22:08:37 Erics-iMac.local WebProcess[1866]: objc[1866]: Object 0x7fec4841c8c0 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
Aug 19 16:35:11 Erics-iMac.local mds[39]: (/)(Warning) IndexQuery in bool preIterate_FSI(SISearchCtx_FSI *):Throttling inefficient file system query
Most of that is also out of my area, but doesn't seem related to the TC or backups. 
Hard to tell so far, but it looks like problem is on your network, or power, or with the TC.  Trying backups to a directly-connected external HD would be a quick way to confirm that, and especially if these are your only backups, a wise thing to do anyhow. 
It's always prudent to keep "secondary" backups, more so if your main ones are on a network, and especially if there's the slightest doubt about them.  See Time Machine - Frequently Asked Question #27 for more info and some suggestions.
And/or, start through the list in the green box in #D2 of Time Machine - Troubleshooting.

Similar Messages

  • Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

    Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

    AFP - Apple Filing Protocol
    The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing.  Time Machine needs some specific features that are not typically available on generic networked storage devices.
    There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
    If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.

  • My time capsule just keeps looking for a backup disk

    I am having problems with my Time Capsule. I try to back up my mac book pro onto my time capsule and it just states "looking for back up disk" and wont go past that. It still works as a shared folder to store files, however it never comepltes a back up. It had been working fine then all of a sudden stopped. I have tried everything. I reformated it back to the factory settings and set it up again. I didn't lose any of the files I had on it using it as a external hard drive. However it still wont back up. Any help would be great as I have tried multiple things. I am currently using moutain lion.
    Thanks

    Do a full reset of TM..
    See A4 here. http://pondini.org/TM/Troubleshooting.html
    Your reset did nothing to the TC drive.
    Try a verify of the backup.. A5 in above reference.. And load the widget, A1 so you know what TM is doing.
    If you continue to have issues.. ensure the TC has a short name, no spaces and pure alphanumeric.. See C9.. same reference again. Many people use names which are far too long.. it causes issues.
    Sometimes mixing data and backups as you are doing has bad effects.. it is certainly not without issues.
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Sometimes it does just bomb.. you do have to wipe the drive.. ie erase and start over. Clearly if you are loading data as well onto the TC.. wiping will require you first off load those files. Consider using a USB drive to keep data and backups separate.

  • Can Time Capsule be used simply as a backup disk?

    Is it possible to disconnect Time Capsule from the network (with router etc) and use it simply as a backup disk for Time Machine?  I would like to go back to using ethernet for internet as it is faster.

    To be completely accurate, you cannot exclude the Time Capsule from your network, if you want to use it for anything at all. It does not have to serve as a wireless access point or your router but it does have to be available to your network.
    You should also connect your Time Capsule using Ethernet for the same reason - it is faster.

  • Time Machine won't restore a critical backup - disk space not sufficient error

    Using Time Machine Restore Backup says my Macintosh HD has 55 GB available. I need to restore a 50GB Time Machine Backup from an external disk to the Macintosh HD device as the transfer destination of the restore copy it it gives me a message 'This Disk does not have enough space to restore your system'. In fact trying to restore all my many time backups over the past months give the same error even though the backup size is less then my Macintosh HD destination.
    So I used the Time Machine software to delete many of my documents in the backup that I want to restore, now it is 30 GB through the Time machine finder, but restoring still gives me the same error. However, time machine made a new backup of my system today of 30 GB but when I go through the backup process using this, there is no error about there not being enough space.
    It seems although the finder in Time Machine recognises that file is just 30 GB, in the restore process it doesn't recognise that file has been reduced to 30GB

    If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
     ▹ System Preferences... ▹ Time Machine
    If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

  • Is Time Capsule Apple's way of admitting AEBS Disks does not work?

    The support/discussion area is full of posts from many of us who have struggled to find a working solution for our Airport Extreme Base Stations with an attached disk drive; our frustration and patience has been tested as this was a promised technology, advertised to work at sale of the AEBS. Moreover, Apple touted the wireless backup with Time Machine as Leopard got close to shipment, but pulled the technology at the last minute.
    So my question to Apple is, are you now admitting that AEBS + Disk simply does not work, and if so what are you going to do for those of us to bought into a technology promise that has simply failed?
    Any insight, suggestions, patches, or even communication would be a HUGE and welcome change given the misinformation we have endured to date.

    Interesting points from several of you. I am sure if these are global issue I might not have encountered them due to my light usage of AEBS external disk to date. That stems of course from my heavy usage of my Linux server mentioned earlier. I am sure that I might encounter some of them if a moved all my data onto an "Air Disk."
    It sounds however that the problems are more OS X / Air Disk Client issues than AEBS from this point of view. Without actively troubleshooting them it's hard telling. Just a couple thoughts - please ignore if already covered elsewhere:
    1. For the "after a couple days - vanished" issue: Have you also tried another OS other than OS X? (Windows, Linux, Solaris, BSD, anything with a samba client) Are you connecting via Air Disk or SMB? I do not know the internals of Air Disk, but I have been using the samba services of the AEBS.
    2. As for automount, this very much sounds like a problem with the Volume Manager in OS X. Have you sniffed the network to determine if the VM is sending out the request for mount?
    3. Finder not showing unless displayed/accessed via Desktop sounds 100% OS X problem.
    4. 10.4 vs. 10.5 issue again points to OS X.
    5. Access permissions: This is a common issue with NAS storage. Most times it comes back to end user not understanding the capabilities or poor/incomplete documentation of the product again causing misunderstanding. I would guess given the "it just works" mantra that the documentation is somewhat lack luster causing end user confusion.
    6. Time Machine Target: I agree and they should fix this. Especially with another near identical product being released. I expect an firmware update for the AEBS when TC is released.
    I am not trying to be a PITA, just trying to lend my knowledge/experience to the community. I have been working with carrier class networking and storage for nearly a decade. That being said, I don't expect this device to keep pace with those environments or feature sets. This is old news for that space, but cutting edge for the SOHO and consumer space. There will be bumps in the road caused by both the vendor and end user.
    I think the most important things to determine is if "Air Disk uses SMB/Bonj/etc or a proprietary application protocol. Then if the problem is with Air Disk or direct SMB access (or both.) Lastly it needs to be determined if this is a client (OS X / Air Disk) or server (AEBS) problem. These issues can not be solved until one device is pinpointed as the cause for each of these issues. Many of these in fact sound like client issues in OS X and it's supported applications. (Particularly TM sounds at fault since I can not use my SMB shares on my Linux server as a target.) I am willing to help troubleshoot, but only to an extent since we all paid Apple the money not me. =)

  • Airport Time Capsule gets hung up on virifying backup

    Occasionally when I am backing up my MacBook Pro (2011) with latest software to my Time Capsule the verifying backup step gets hung up and does not complete.  What do I need to do to keep this from happening?  This may happen several times a day.

    I stopped the verify back up and then used the "Back Up Now" Time Machine couldn’t complete the backup to “Bill Lantz's AirPort Time Capsule”. It also stated "The backup disk image “/Volumes/Data/William’s MacBook Pro (2).sparsebundle” is already in use.
    Does anybody have a suggestion?

  • I can't connect to my time capsule. the machine is on but the message is the backup disk is not available.

    My Mac desktop has not backed up to my time capsule since July 10th.  The time capsule is on and plugged in but the message reads that the backup disk is not available.  What can I do?

    It helps to know what OS you are running on the Mac.. let me guess.. Mavericks.. since it is the most buggy on the network side.. although Lion and ML are also lacking the rock solid nature of Snow Leopard.
    Have you done the simple things.. ??
    ie reboot the TC?
    No luck then reboot the network.
    No luck then I would recommend a complete reset of the TC.
    I have outlined how to do this many times.
    eg Re: Why the connection from Air to Time Capsule is lost suddenly?
    As you will see this is not something unusual.
    Apple has a document.. very well hidden.
    OS X Mavericks: Time Machine problems
    It is helpful (although it doesn't go far enough IMHO).
    Try what I have suggested and tell me how it goes.. more problems then also give me more info.
    Full network info and details on the OS you are running.

  • Time Machine wants to do a full backup.  How do I point it to my previous backups so it will do an incremental backup?

    I lost my wireless connection to my backup drive for a short time.  Now time machine wants to do a full backup.  It doesn't know that I have previous backups.  How do I point it to the previous backups so that time machine continues to do incremental backups rather than doing another full backup.

    I did some more reading and I found that Time Machine would find the older backups once a new backup is completed.  The backup ended up being a little larger than previous backups (2.65 GB vs typical incremental backups of several MB's)  but when it completed, time machine updated the last backup time/date and the oldest backup time/date properly.  So I guess, I don't have a problem.

  • Time Capsule hanging frequently

    I have a 1TB Time Capsule which I use both for backup and to store my iTunes library. It regularly hangs and becomes inaccessible. The only solution I've found is to power cycle it
    The problem is intermittent, but does seem to be related to the volume of data being transmitted. It will stay up working fine for weeks if lightly used. But if I'm ripping CDs, then it hangs frequently - I've not managed to rip more than 20 CDs in a sitting and frequently it happens more often than that (I'm in the process of ripping an 800 CD collection, lossless).
    The Time Capsule is connected via Ethernet to a BT HomeHub which provides internet connectivity. After it hangs, I can't connect to it wirelessly (I get a prompt for the WEP password, but then the connection times out) or via Ethernet. AirPort Utility reports that it can't find any devices. The only solution I've found is to power cycle it
    Suggestions for what might be up would be very warmly received!
    Thanks,

    Hi Paul,
    I'm having the exact same problem with my Time Capsule. I'm thinking it is time to take it back to Apple. I have also noticed that accessing a USB disk connected directly to Time Capsule often causes the TC to reset itself (yellow light blinking & wifi unavailable). It's very frustrating.
    John

  • Cannot Connect to Time Capsule: "the backup disk is not available"

    I am having a problem that I can't diagnose with my 500 GB Time Capsule (my HD is 128GB). The firmware is current. I first did a search for 'the backup disk is not available' since that is the message displayed in the Time Machine window (with the red checkmark).The Time Machine widget says this:
    Attempting to mount network destination using URL: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
    NetAuthConnectToServerSync failed with error: 89 for url: afp://[email protected]/xxx%20xxx's%20Time%20Capsu
    I installed the widget after I went to the Time Machine - Troubleshooting user tip, here: http://discussions.apple.com/thread.jspa?threadID=2057525. Also went to Using TIME MACHINE with a TIME CAPSULE, here: http://discussions.apple.com/thread.jspa?threadID=2296894
    I also renewed the DHCP lease, tried to do 'connect as' from the Sidebar window, also via go-> connect to server ("there was an error connecting to the server Timecapsule; Check the server name or IP address & try again"), go to Time Machine under System Preferences, select "None" for hard drive, turned off Time Machine, then turned it back on and reselect Time Capsule as the hard drive to backup (timed out), tried re-setting up the Time Capsule both automatic & manual (times out when reading TC configuration)., and finally, writing this post.
    I am connected to the internet with the Time Capsule, and I am concerned about making too many changes, because I don't want to risk losing my internet connection, since that seems to be working fine. I was able to make regular backups until yesterday. Tracing my steps from when it used to work to when it 'broke':
    1)I attempted (unsuccessfully) to mount the Time Capsule so that I could do a search on it. (I didn't realize at the time that I couldn't mount a wireless device.)
    2)The only other thing I did was drag some music folders that I wanted backed up next to my sparsebundle backup (which I can no longer see, because the Time Capsule is no longer accessible via the finder) only to get the spinning ball with the copying window, which I couldn't force quit unless I quit the Finder. So, I force quit, rebooted, and repaired the disk/permissions with disk utility.
    Did I do something wrong by dragging & dropping my files over trying to use it as a backup AND a an external HD? Or trying to mount the drive? Or maybe since adding several gigs of music, I took up too much space & now don't have room for a backup? (In which case, I need to access the drive & erase the music, and start over: if only I could SEE it I could do that.)
    I am still doing searches trying to see what I need to do; I haven't yet re-set it, due to my concern about my internet connection, which could potentially prevent me from getting any information to fix it. At this time, I am not sure if this is a Time Capsule, Time Machine, or Airport issue. During the time that I have been writing this, the red check changed to 'connecting' but then the 'delayed - Time Machine is not available' message came back up
    TIA

    Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
    This is just standard windows.. woops, Mac OS networking now.

  • HT201250 can a time capsule be used as just a backup for data without being connected to a home network?

    This is the explanation for my my question about whether a time capsule can be used as a backup without being connected to a network.  I had to disconnect my time capsule when I upgraded my landline to a wireless home phone in order to go to a wireless security system that would work with my 2WIRE router. The time capsule blocked the usage of my camera on my security system, not allowing the camera to connect to the 2WIRE router. Once I disconnected the time capsule,  the camera was able to connect wirelessly to the 2WIRE.

    Welcome to Apple Support Communities
    See > https://discussions.apple.com/message/16717724#16717724
    As you can read, you can do what you want. You just have to set up the Time Capsule network in AirPort Utility without connecting it to the router and ignoring the messages, and connect to the Time Capsule network. You will have to switch between the Time Capsule and the other router's networks

  • I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    Did you follow the instructions on the page linked below?
    OS X Yosemite: Recover your entire system

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Time machine couldn't complete the backup to johns airport time capsule. the backup disk is not available

    time machine couldn't complete the backup to johns airport time capsule. the backup disk is not available

    You may find answers at Pondini's Time Machine FAQ for help with all things related to Time Machine.

Maybe you are looking for

  • Iphone 4 -- 4.2 upgrade....Text now making a noise when sent

    Good Morning, I upgraded over the night and now when i send a text it makes a noise every time it goes through. The text tones are off. IS there a way to fix this to not make a noise.

  • XML data source lineage id errors

    Hi All, I am trying to load a large xml via XML source adaptor. I have generated XSD for it and the data flows through merge join and sort transformation to form multi level hierarchy and pushes data to destination table for first time. Next time i c

  • Exporting the Lightroom Web Flash Gallery

    I have a website that includes an HTML slideshow.  I would like to update the HTML slideshow to a web Flash slideshow through the Lightroom 3 web Flash gallery module.  So far as I can tell, however, one can export the Lightroom Flash module only as

  • Can't start flashbuilder after install

    I've installed 4.7 beta 2 on an almost clean windows install (creative cloud is also installed) to start working with monocle and asc2 but this is as far as I got. I see the startup graphic but after the loading workbench it just shuts down again. Wh

  • Is there any certification exam in J2ME?

    hi, I am prakash raja. Basically i am a J2me developer.. I have decided to do Certification in J2ME like SCJP. If any certification exam in J2ME, Please let me know... I am waiting for your quick reply. Regards, Prakash raja.R