Time capsule hangs on 18.5% no matter which backup used
I've tried three different hard drives now.
Status bar stops pulsing and just hangs at 18.5%
I've tried backups from three months ago to 3 days ago, I've tried a new hard drive cable, I've tried every Ethernet cable known to mankind
Anyone have a suggestion?
The time capsule is 3 months old the MacBook is 2010
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.
Similar Messages
-
Hi Community,
since 3 Month I have now a time capsule and enjoy it very much. I have a MacBookAir (mid 2011) with Mountain Lion installed.
But I have one problem.
My Mac runs the hole night. I can start checking my emails in the morning etc. all fine. But when I start to use for example iTunes (was open the hole night) Time capsule hangs up. My Library from iTunes is stored on the Time Capsule. Time maschine is switch off.
I am getting the impression that there is a problem when the HDD from Time Capsule has to start again from the sleep mode. When I use the Mac over the day all is fine. It does not happen all the time.
When I start to look onto the Time Capsule via Finder it can happen the Time Capsule does not hang up.
Can someone tell what I can do in order to avoid it?
Kind regards,
MacBistramHi Chameleon,
thanks for the fast reply.
my Library is to big to move it somewhere else and it was one of the reason why I bought the time capsule.
It does not only happen when I use iTunes. TC hangs also up when I try to copy a large amount of data from my local dirve to the TC (after the 'sleep mode').
I use the TC HDD as my Server-Disk-Storage. It cannot be the case that it hangs up after it comes out of the sleep mode.
Just as additional information. I access the TC over WLAN. Maybe it is the case that the TC hangs up when the WLAN has to mutch to do.
Kind regards -
I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls. -
How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?
How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?
Bridge the TC.. plug it into the AEBS with ethernet.
-
I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?
You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.
-
Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7
Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste. -
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.
A constant bug in Mountain Lion.
Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
Give that a try first. -
The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?
HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html -
Can i store my files on time capsule from my ipad, and copy them back, without using itunes to sync the tablet? i want to buy an iPad Air and to forget my laptop and i think that even the 128 gb wont be enough some times. I am wandering if time capsule can be used as external hdd and to connect on it via wifi ...
No. You cannot access your Time Capsule directly from an iOS device. The only way to back up an iOS device is to a computer through iTunes or to iCloud, though in some cases you can open and save files via another cloud-based service such as Dropbox.
Regards. -
Time Capsule spends about 30 minutes "preparing" for each backup.
My Time Capsule has two MacBooks backing up to it. One of them backs up fine; the other has a problem. It goes into "preparation" mode before each backup and it stays there for ridiculous lengths of time -- even if the machine was not used therefore nothing needs to be backed up. The TC hard disk just spins and spins.
You have continual messages.. No space left on device
Is your TC full..?? Are you using wireless to connect to the TC?
The time capsule has been stuck in the "preparing for backup" stage indefinately: like months and months.
Note that Time Capsule is the hardware device.. Time Machine is the software that prepares the backup.. They are completely different.. !!
Open either the TM preference or the airport utility and tell us how much space is reported left on the drive.. or is the local hard disk full??
If you upgraded OS on the computer it can fail to properly clean up old backups and you will need to step in and erase the TC yourself. Or plug in a USB drive and set that as a new destination for the backup. -
Any tricks to swapping out my old time capsule with a new airport extreme I am also using airport expresses? The hard drive on the TC quit working.
I do plan on using an external USB HDD for time machine backups. I have both 802.11g and 802.11n used for playing music via stereos.
I would recommend against it. Apple does not support Time Machine backups to AirPort Disks (USB HDD attached to the AirPort Extreme). Although folks have done so, we get a number of them here asking for help with their corrupted backups. If your backups are critical to you, please use another means (like connecting the USB HDD directly to your Mac) to do so. -
Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update
The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???
Maybe you are looking for
-
This question is directly to Verizon Wireless Customer Service: I recently had to cancel my contract because my husband is in the military and we have been stationed overseas. We went in with his official orders and received receipts that each of our
-
Out of no where, interface is 'drawing to much power'?
Ok, so i've updated logic express to logic express 9. I've also got snow leopard 10.6.1 and i don't know if that has anything to do with this but i'm just letting you know. i've also got a macbook pro with a 2.5GHz Intel Core 2 Duo processor with 4GB
-
"This iPod cannot be used because the required software is not installed.."
Ok so I have a LONG list of problems with my ipod touch and Vista, I have Vista Home Premium and iTunes wouldnt even install because it gave me a "Vista" error "microsoft.vc80.CRT,public Key Token="1fc8b3b9a1e18e3b",type="win32",version="8.0 .50727.7
-
Why does the tab in the settings for keynote for iOS for icloud keep flipping itself back to OFF?
I added a keynote document to icloud/iworks on my imac. No sign that it nade it to my ipad2. What i did notice is that the slider switch on the icloud settings for keynote on the ipad keeps restting itself back to OFF, despite several times setting
-
hi that's my problem: i tried to load a dvd today. nothing works. the disk doens't load: it stays half inside half outside, I can not put it inside, like if a disk was already indise, but there is not any one. can some one help me please? thanks a.