Time Capsule Hard Drive (hard disk) Won't Mount

I just purchased a new 1TB Time capsule. I installed the software on the disc out of the box as required, then started up TC and it installed the new Firmware 7.3.2 and I was good for internet wirelessly and via ethernet. BUT the main feature, the access to its internal 1TB Hard Drive NEVER mounts. I can't find it anywhere. Light on TC is steady green.
After reading the discussions no clues either. I tried downgrades to 7.3.1 firmware but still not Hard Drive to access anywhere.
HELP!
Kurt

Replaced the Time capsule, avoided firmware update 7.3.2 and jumped straight to 7.4.1.
Now all works fine.
truk

Similar Messages

Hard Drive and Disk Image not mounting

Hey everyone,
I'm running a G5 Dual 2Ghz. with OSX 10.5.8 I'm having problems with a back up hard drive. It is an external Western Digital My Book 1.5TB SATA drive. After using it for a few months, it suddenly did not mount anymore.
*1) It also would not appear in Disk Utility.*
a) Disk Warrior couldn't find the drive (I think because it's formatted with FAT32)
*2) I then took the drive out of the enclosure and put it in the spare bay in the G5.*
a) It didn't mount
b) It did show up in Disk Utility
c) In Disk Utility it wouldn't give me the option to Repair Disk Permissions or Repair Disk
d) In Disk Utility is says under Partition Scheme: Unformatted
e) In Disk Utility I don't have the option to mount/eject only gives me the "info" option
f) Tech Tool did find the drive and it passed all tests
g) Disk Warrior still did not find the drive
h) TestDisk finds the drive, but does not find any partitions
*3) I then created a disk image of the drive in Disk Utility onto an external hard drive. The image comes back at 320GB, which seems to be about right I think.*
a) The disk image would not mount with Disk Image Mounter. It would say there is an Unrecognized File System
b) In Disk Utility - I don't have the option to Repair Disk Permissions
c) In Disk Utility - When trying to Repair Disk - I get the error: Repairing Disk failed with error Unrecognized FileSystem
d) In Disk Utility - If I click Open - The Log file says:
+Attach Image+
Initializing...
Verifying...
Finishing...
+Image of "disk0.dmg" attached successfully+
+Mount of "disk0.dmg" succeeded+
-But it is no where to be found
e) Disk Warrior can not find the Disk Image
f) I took the new external drive with the Disk Image to 3 other mac computers but the image would not mount
*4. Other things I've tried when opening the Disk Image for the new external drive.*
a) in Terminal - hdiutil attach -nomount "volumes/untitled/disk0.dmg"
b) in Terminal - sudo hdiutil attach -nomount "volumes/untitled/disk0.dmg"
c) Deleting files System/Library/Extensions.kextcache
System/Library/Caches/com.apple.kernalcaches
ALL UNSUCCESSFUL
I'm running very low on ideas. I know I could just erase the drive and reformat it, but the files on it are very important and must be recovered.
Any help or suggestions would be very helpful. I will not have time until after the weekend to try more things. Thanks in advance if you do not hear back from me until after this weekend.

Yes, it will. But if DU says the disk is unformatted then it is also not accessible. If you have files you don't wish to lose then you will need to try recovery software:
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

TIME MACHINE EXTERNAL DRIVE BACKUP DISK CANNOT BE MOUNTED

Hello,
Last week i brought a WD MY BOOK LIVE NETWORK DRIVE.
I hv 2 Windows PC and 1 MACBOOK. All data residing on these 3 computers i intend to back up.
One Windows PC i was able to successfully connect, 2nd Windows PC not yet connected.
Macbook connected on teh first day of WD installation. After that day it gives an error "THE BACKUP DISK IMAGE COULD NOT BE MOUNTED".
I hv tried various methods to rectify this error as discussed in many forums, but none seem to be helping.
Can anyone suggest how should i solve this.
I called WD, they told me to call APPLE as its a time machine problem.
I call APPLE and they are asking me to call WD.
i AM USING MACBOOK - MAC OSX VERSION 10.5.8

My book world
Check here
http://wdc.custhelp.com/app/answers/detail/a_id/8422/p/247,264/c/0
I just solve the problem after 45 minutes with the lervel 3 WD support. You have to return to firmware 1.02.06 since the 1.02.10 version has a network card driver error and in some configurations (a lot more) the disk just stay connected for a couple of minutes. To do that you have to manually return to old firmware but WD do not has the file as public so you have to call them. One way to stay connected a bit more is making a permanent ping to the disk.

Trying to restore from time capsule to nes hard drive, keeps looking for disks ! Can you help

ccan't restore from time capsule to new hard drive, after changing to new HD, after calculating required space to restore it keeps looking for disks! Have have put original OS X install disk 1 in it won't Eject , any help

The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
If you have a desktop Mac you can plug it directly into the Mac by ethernet.
But we need to know how the Mac is connected to internet.
I have given some info on one layout here.
https://discussions.apple.com/thread/4817218?tstart=30
If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

HT201250 How to restore laptop from time capsule after replacing hard drive

How do I reload all my programs and files from a time capsule after changing hard drive? Also Apple store reloaded with Snow Leopard and not Lion. Will that be a problem? Thank you

Plug the external drive into a computer by usb or whatever box you have available..
When you say blank, is it correctly formatted.. we recommend HFS+ which is Mac OS Extended (jorrnaled)
Make sure you use GUID type disk setup not MBR if it came from PC world.
Copy the files via finder from TC to the external drive.

How to restore from Time Capsule to bare hard drive

This is more for information, than a question, but I really hope that it helps someone else out facing the same challenge.
Scenario:
1 complete recent backup on Time Capsule
2 failed hard drive on Mac
3 no startup or OS disk
[My teenage daughter was distraught, as her much loved and much abused MacBook Pro died completely on a college tour; quick diagnosis confirmed that the hard drive was completely toast. And with it, she believed, all of her work this summer on her college applications.
That was the bad news. Now for the good news. Unbeknownst to her, I had configured her machine to automatically backup to the Time Capsule on the home network.
Now the problem. We just moved home. No OS disks. No install disks. And I discovered that she hadn't told me that the optical disk drive was also toast. So no way to get a disk in, in any case.
So I have a backup, and a new hard drive to go into the dead Mac, and (fortunately) a good Mac (actually several). But all of the guides assume that you have some way to get the zombie Mac to boot.]
Solution:
1 figure out spec for new hard drive, find one, buy it and install new hard drive in dead Mac (making it a zombie Mac - it moves but it has no real brains) http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf and http://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Repl acement/4305/1
2 mount hard drive as FireWire disk in Target mode by using ⌘T to any good Mac
3 download Carbon Copy Cloner http://www.bombich.com/
4 start the process of cloning, which involves creating a (hidden) Recovery HD partition http://help.bombich.com/kb/advanced-strategies/the-disk-center#recovery_hd
5 do NOT proceed to clone the 'good Mac', ejecting the formerly dead Mac, which was a zombie Mac, and now has a brain again, and shut it down
6 connect the now undead Mac to the Time Capsule
7 boot the now undead Mac, and restore as usual from the Time Capsule http://pondini.org/TM/14.html
[... and thereby obtain many many good father points]

Read Q14-18 in Pondini.. the grand poohbah of Time Machine.
http://pondini.org/TM/FAQ.html

Using Time Capsule as external hard drive

Hi. I have a Mac Book Pro, and external hard drive, and now, a Time Capsule. Since I don't have a Mac, all photos and music (occasional backups, etc.) have been stored on the one external hard drive. I got the Time Capsule to replace the external hard drive as primary (keeping it as secondary)–in addition to using the Time Machine.
If I'm understanding correctly, I open finder, open Shared>AirPort>Data–and then drag and drop all the files currently on the external hard drive onto this window? Is this correct? Will it COPY, and be accessibe, and not cause problems?
Will it mean, as I hope it means, that my MacBook and iPad will be able to open and use iTunes and iPhoto through this AirPort? (Instead of having to plug-in the external drive.)
I'd love to use the Time Machine as well. But can hold off, continuing to back up only occassionally, since this dual purposing may not to be advised?
Thank you for your guidance.

Will there be a problem running Time Machine in the back ground while using the Time Capsule's internal hard drive manually?
No.
Thus far, instead of using Time Machine in an automated mode, I've turned it on when I want to make a new back-up. Will it be necessary to run Time Machine in manual mode only or can I use its automated feature?
Or–I may be seeing the light–will running the two in tandem allow me to save each new back-up on both devices simultaneously, keeping both drives up to date?
I would suggest that you consider changing your backup strategy. Time Machine was designed to be an automatic "run and forget" operation that performs incremental backups of your Mac's internal hard drive. It will also backup an external hard drive attached directly to your Mac. Running it manually is not very effecient and you stand the chance of not getting a very recent (they run once an hour) backup when you need it.
For Time Machine I would suggest that you continue to use your external hard drive as is and dedicate your new Time Capsule for Time Machine backups. If you still need more external storage, you can always add additional external USB hard drives to the USB port on the Time Capsule.
Even better you will also want to include a second "full-clone" method to your backup strategy. This method will make a full copy of your Mac's internal disk drive that is bootable. Why do this? In case your Mac has a fatal hard disk crash, you can use the clone backup to boot your Mac back up and continue to use it within seconds. Without the clone backup, you would first need to install a new drive, then load a fresh copy of OS X, and then, perform a restore from Time Machine. This can take a while.
To perform these clone backups, I would recommend that you get another external USB hard drive with a capacity at least twice that of your current internal drive. I use Western Digital My Passport drives for this purpose, but any similar drive should do. To create the clone backup I would suggest using either SuperDuper! or Carbon Copy Cloner.
I would suggest that you create a new clone backup at least once a month or more often if your data is critical to you. Just connect a dedicated clone drive to any available USB port on your Mac and run the clone software to make the clone backup.

Please Help - Time Capsule and External hard drive Issues

Recently, I switched from Comcast to AT&T uverse as my internet provider and I started experiencing problems.
(1) I have a 4th generation Apple Time Capsule which I am using as my router.
(2) Connected to the Apple Time Capsule - USB - is an external hard drive (not for backup with Time Machine.)
(3) I have a 2011 Macbook pro which I use to access my file on my time capsule and external hard drive.
(4) I had been using my AT&T portable Hotspot from my cell phone to get internet access on my MacBook pro from remote locations to gain access to my external hard drive which is attached to the time capsule.
(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
THE PROBLEM - I need to be able to use the hotspot function from my cell phone to gain access on the external hard drive using my MacBook Pro which I was able to do before. Now it is showing time capsule under finder but unable to connect.
Do I need to reset my Time Capsule since I have a new service provider. Everything else works fine - meaning able to get internet signal but unable to access my external hard drive and backup my time capsule. Please HELP.

(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
If you got ATT to turn off router function in their modem..
Then 6. is wrong.. You cannot have the Network switched to bridge mode..
You must have it set to dhcp and nat.
That is also why you cannot backup.. the TC is off the network.
Please change back to router mode in the TC.
Ensure the internet tab shows dhcp and you create a wireless network.
Then power down the TC... power down the ATT modem.. wait about 20min (you can try 5min.. but it might not be long enough).
Power up the ATT modem.. wait 2min for things to flash lights in de right blinkin order.. then start the TC.
Open the airport utility and make sure your TC captured the public IP and is now working as the router.
That should fix that end of it.. the hotspot end??
Tell us what happens.

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

Time capsule as a hard disk

HI can I use my Time Capsule as a hard drive as well.
What I want to do is have two of use it as a hard drive like one that you plugin but share it wirelessly.
Can this do this?

Yes, you can just copy files to the TC.
Create a new directory in the root of the TC.. do not copy files to the sparsebundles created by TM.. if you are using it.
If you want to mix data and TM backups please do read the instructions.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Can i use time capsule as another hard drive?

Can I use time capsule as another hard drive?

You can, but it was not really designed for that purpose. Access to files will be quite a bit slower than a drive that is directly attached to your computer.
The Time Capsule's main function is as a back up device using the Time Machine application.
If you are using it already for Time Machine, it is generally not a good idea to mix Time Machine backups and regular files on the same drive as there will be struggle for space when the drive starts to fill up.

Problem partitioning external hard drive with Disk Utility

I'm trying to create a new partition in disk utility in an external hard drive using disk utility and every time I click Apply it says that "Disk Utility has lost its connection with the Disk Management Tool and can't continue. Quit and relaunch Disk Utility". It is a 3TB hard disk and I already created the first partition of 2 TB, and when I click the + symbol to add a 1 TB partition and click Apply is when the error shows up. I have restart the mac, unplugged the hard disk but the error still shows up. Anyone has any idea??? Thanks for your help in advance
David

I solved this issue. I was able to create the partition with the format MS-DOS and then I erased it to the Mac OS Extended (Journaled) format.
Now it is working OK. Hope this help someone

My external hard drive (G-DRIVE Slim 500GB) won't mount?

My external hard drive (G-DRIVE Slim 500GB) won't mount?
All of a sudden my hard drive didn't show up in my finder. I checked in disk utility and it was there but greyed out. If I tried mounting it told me that could not be mounted and that I should try 1st aid.
When I try to verify disk I get a message to tell me that the disk needs to be repaired with the information shown below.
Verifying volume “G-DRIVE slim”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
The volume G-DRIVE slim could not be verified completely.
Error: This disk needs to be repaired. Click Repair Disk.
When I perfrom the disk repair it tells me that the disk cannot be repaired and I should back up as much of my files as possible, reformant the disk, and restore my backed up files. The information shown is below:
Verify and Repair volume “G-DRIVE slim”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
The volume G-DRIVE slim could not be verified completely.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
When I try the same thing on another Mac Book Pro I have the same situation but it tells me the disk is ok and still won't mount after.
I'm not sure what to do..........

You need to make your own decision on which to purchase. Read up on them on their websites because each do something a little different.
Techtool Pro
DiskWarrior (Highly Recommended for Directory Damage Repair)

I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility sa

I have a Macbook Pro that was slowing down. The HD was nearly full as I do a video work. I removed over 400gb of photos and video and it made no difference. I ran disk inventory x and that says that there is only 60gb on the hard drive but disk utility says there is still 430gb on the HD. How do I remove what DU says is still there.
Thanks

You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs

Unable to verify or repair my external hard drive with disk utility, reason being ...

Hello there,
I have been facing this problem: After I started getting an error 50 error while trying to view in Quicktime player a movie which I had exported from FCPX today, I found that I was not even able to trash the movie [this was a test movie used for export and I had no need for the same]. A little while later when I opened FCPX, I found this message pop up:
Got a little worried and then tried to verify and repair my hard drives using disk utility, but I could neither verify nor repair the disk. What should I do now?

Hello Klaus,
I think I have been able to overcome the problem/s.
I have been using my Seagate 2 TB drive [2 USB] with a FW adapter and was using FW connectivity for the past several months without any problems. About 2 months ago I added a 2 TB Lacie, FW, to my workflow and this EHD was daisychained to the Seagate. Had been facing no problem with this arrangement until today.
Now let me try to tell you what I had done:
I ejected the Seagate drive with the intention of reconnecting it again. But, no, when I tried to reconnect, this message came up:
After several attempts, I did this, connected the Lacie by FW to the FW port on the Mac and connected the Seagate by 2 USB. Was I glad to see my Seagate HD icons shining in all their glory on my desktop! I utilised the services of disk utility and was informed that these prodigal sons were absolutely fine.
I also tried to do this: empty the trash. Was I happy to hear the sound of files being cast out?
Well, well, at least I will be able to get some peaceful sleep now! I have not yet opened FCPX, but I trust it will also be reading the Seagate HD once again.
Good night and thanks for being helpful.

IMac Finder cannot see external hard drive but Disk Utility can

I have a WD external hard drive and it has been attached to my iMac for a year or two. About two months ago I upgraded to Lion 10.7.5 and hard drive still worked. Then suddenly about a week ago the iMac no longer sees the external hard drive in Finder.
I have connected the hard drive to the iMac with different USB cables and into different ports and it makes no difference so deduce there is no issues with the cables or the ports. I have connected the hard drive to an old Macbook and it can see the harddrive and read some of the info but I really need the hard drive attached to the iMac as I store all my music and photos on the external hard drive.
I read another thread and someone asked if you can see the hard drive in Disk Utility. I tried this and Disk Utility can see the hard drive.
What does this mean? Any suggestions as to how to get the iMac to see the hard drive so I can access the data on it?
I dont really know how Disk Utility works therefore if that is any help to me.
thanks

Open the Finder.
From the Finder menu bar click Finder > Preferences then select the General tab.
Make sure: External disks is selected.

Time Capsule Hard Drive (hard disk) Won't Mount

Similar Messages

Maybe you are looking for